Auto-Sleepers Group Symbol recalls

The tyre valves may fail as they are rated to 70psi and the maximum operating pressure for the tyre is 80psi. Note: the recommended operating pressures for the tyres when fitted to the vehicles in question are between 50 and 70psi. It is only when the tyre pressure is over 70psi that a failure might occur.

Fix: Recall the vehicles that are likely to be affected to replace the rubber valves with higher rated metal bolt in valves.

80 vehicles · built 1 Jan 2006 to 31 Dec 2009

Incorrect specification wheel bolts fitted to alloy wheels. Wheel nut may loosen in service.

Fix: Recall the vehicles that are likely to be affected to replace the wheel bolts with ones that are the correct specification.

45 vehicles

It has been identified that the refrigerator flue may not have been connected such that fumes may enter the habitation area.

Fix: Recalled vehicles will have the refrigerator flue extension fitted correctly.

5 vehicles · built 1 Jun 2008 to 30 Jun 2008

It has been identified that during production a spacer has been omitted from the nearside forward facing bed box seatbelt. This over time may cause the seatbelt to wear against the mounting bracket.

Fix: Recalled vehicles will be fitted with a replacement seatbelt and spacer.

• SYMBOL AND ES: 84 vehicles
• PAVO: 84 vehicles
• DORSET: 84 vehicles

The rear fixing bolts for the FASP swivel seat can in extreme circumstances fail. If the bolts do fail the rear of the seat runners will no longer be attached to the floor pan. This concern was realised during industry wide testing.

Fix: Recall the vehicles that are likely to be affected and replace the 20mm 10.9 tensile strength allen key head bolts with 20mm 12.9 tensile strength Unbrako bolts.

• MIDAS: 545 vehicles
• DORSET: 545 vehicles
• PALERMO: 545 vehicles
• LANCASHIRE AND ES: 545 vehicles
• SUSSEX: 545 vehicles
• SYMBOL AND ES: 545 vehicles
• INCA EK: 545 vehicles
• NUEVO AND ES: 545 vehicles
• INCA EL: 545 vehicles