Lexus Lexus NX recalls

Due to the programming of the forward recognition camera software there is a possibility that the memory inside the forward recognition camera could fail during processing when the ignition is turned OFF. If this occurs the PCS will not activate on the next ignition start causing warning lights to illuminate audible chimes to sound and messages to display on the instrument panel.

Fix: Reprogram the Forward Recognition Camera

4,841 vehicles · built 15 Apr 2021 to 6 Mar 2023

On affected vehicles there is a possibility that the DCM may not complete the shutdown process within a specific period of time when the ignition is turned off causing the DCM to not restart at the next ignition cycle and making the e-Call function unavailable. As a result the vehicles do not comply with relevant regulations.

Fix: The software of the DCM (Data Communication Module) will be updated via an Over the Air (OTA) wireless update.

4,261 vehicles · built 1 Dec 2021 to 6 Jul 2023

With body panels that are spot-welded to the left and right front shock absorber mounting areas there is a possibility that certain spot-welds were missed.

Fix: Inspect the welding near the shock absorber mounting area. If any missing spot-weld is found welds will be added and damage to the vehicle if any will be repaired.

759 vehicles · built 15 Apr 2021 to 27 Jan 2022

It has been identified that due to the incorrect programming of the Brake Control Module there is a possibility that the parking brake may not be set automatically when the Brake Hold or Hill Assist System is deactivated by certain conditions for example the unfastening of the driver�s seat belt while the system is enabled. When this occurs the system is designed to deactivate the brake hold function sound a warning buzzer display a message in the instrument cluster and automatically set the parking brake. If this should occur and the transmission is left in a gear other than Park then the vehicle could creep forward or backward increasing the risk of a collision.

Fix: Recall all the affected vehicles and reprogramme the Brake Control Module with the new correct software.

• LEXUS NX: 9,113 vehicles · built 6 Mar 2014 to 7 Dec 2016
• LEXUS NX: 9,113 vehicles · built 6 Mar 2016 to 7 Dec 2016

The subject vehicles are equipped with the Anti-Lock Braking system (ABS) Traction Control System (TRAC) and Vehicle Stability Control System (VSC) which are controlled by the ABS actuator. Due to the improper shape of a component inside the ABS actuator there is a possibility that a resin component could be damaged during its press fitting assembly creating minute resin fragment(s) which could become stuck in the actuator. If this occurs the oil pressure control may be delayed when the Anti-Lock Brakes are activated causing a loss of vehicle stability and increasing the risk of a crash.

Fix: Recall the vehicles that are likely to be affected and where necessary replace the ABS Actuator with a new one.

25 vehicles · built 18 Dec 2014 to 5 Mar 2015