Jeep Avenger recalls

On some vehicles the Electronics Stability Control (ESC) warning light and the relative warning message may appear on the Instrument Panel Cluster (IPC) and the ESC may deactivate. In the worst case the vehicle could lose controllability when braking due to Electronic Brake-force Distribution (EBD) and Anti-lock Braking System (ABS) not being available.

Fix: Replace the Electronic Brake System (EBS) Module.

1 vehicle · built 14 Jun 2024 to 21 Jun 2024

On affected vehicles due to a production nonconformity there is a requirement to inspect the brake pedal bracket connection and if necessary perform a rework to eliminate any potential risk of brake pedal disengagement. In the event of brake pedal failure the Electronic Park Brake located on the centre console can be applied while driving to bring the vehicle to a controlled stop. Additionally when active the Automatic Emergency Braking system will intervene if it detects an imminent collision.

Fix: Check for the presence of the clip confirming correct assembly and reworking it if necessary.

211 vehicles · built 4 Sep 2025 to 16 Oct 2025

On a number of Jeep Avenger ICE (internal combustion engine) vehicles equipped with start/stop function and manual transmission the Stop&Start function may not activate correctly. This will result in the engine continuing to run when Stop&Start should be active not shutting off as Stop&Start is intended. This is due to incorrect BCM (body control module) coding software and therefore CO2 levels may increase which does not match the CO2 values homologated and displayed in the CoC (Certificate of Conformity). This can lead to non-compliance with emissions regulations.

Fix: The repair is the Jeep retailer will update the BCM with the latest software to permanently rectify the issue. Jeep ref: 36C.

2,833 vehicles · built 5 Nov 2024 to 24 Jun 2025

On affected vehicles there is a risk of a fuel leak at the high-pressure fuel pipe and rail connections which in a worst-case could result in a vehicle fire.

Fix: Check and tighten high-pressure fuel pipe and rail connections.

3,561 vehicles · built 16 Jan 2024 to 17 May 2025

Affected vehicles may have been fitted with a steering rack which does not conform to specification. This can lead to the need for increased force to rotate the steering wheel and in a worst-case scenario the steering may lock causing a crash.

Fix: Replace the steering rack.

36 vehicles · built 6 Apr 2024 to 6 Jun 2024

Affected vehicles have been equipped with a front camera with an incorrect hardware level ID causing an error code within the car system resulting in ADSA system remaining inactive.

Fix: Replace the front camera.

2 vehicles · built 16 Mar 2024 to 28 May 2024