Maserati Levante recalls

Possible insufficient tightening on electrical connections of 48 volt power system.

Fix: Gain access to the battery system and check tightness of connections to the 48 volt power system. resecure if required.

6 vehicles · built 21 Jul 2021 to 26 Mar 2022

Possible gearbox electrical cable contact with Catalyst thermal shield.

Fix: Check and ensure the correct positioning of the gearbox wiring harness in relation to the catalytic convertor shield if required replace the wiring harness.

1 vehicle · built 14 Apr 2022 to 19 Apr 2022

Supply cables for the 48Volt battery system have an incorrect tightening torque.

Fix: Inspect and retighten cable fixing screws for the 48Volt battery system.

122 vehicles · built 24 Aug 2021 to 24 Sep 2021

When the tail-lamp is receiving a voltage close to the maximum (16V) the tail-lamp may start flickering.

Fix: Check the production date of the tail-lamps if the fitted lamps are within the defective range replacement of the rear lamp/lamps will be required.

20 vehicles · built 24 Jan 2022 to 24 Jan 2022

Wrong TVV (Type-Variant-Version) on statutory plate.

Fix: Replace label located on B Pillar

37 vehicles · built 28 Sep 2021 to 30 Sep 2021

A deviation of the P/T sensor moulding process of the plastic housing. Possible Fuel Leakage in engine bay Loss of power potential fire risk in worst case.

Fix: Replacement of the short fuel line containing the pressure sensor.

58 vehicles · built 28 Jan 2021 to 27 Oct 2021

Exhaust active valve cable may short circuit due to contact with the exhaust system.

Fix: Check cable layout reposition and repair if necessary.

56 vehicles · built 24 Aug 2021 to 16 Sep 2021

Incorrect automatic tightening of an electrical cable on production.

Fix: Check and retighten the connection.

3 vehicles · built 13 Jul 2021 to 22 Sep 2021

The Electronic Power Steering function may not be available.

Fix: Replacement of steering rack.

11 vehicles · built 9 Apr 2021 to 9 Apr 2021

Front tyres outer tread may have been damaged.

Fix: Check and replace tyre if required

7 vehicles · built 23 Mar 2021 to 29 Mar 2021

Incorrect sticker shows data M1561F4 5W correct version is M1561F 4APD.

Fix: Replacement of the sticker label.

1 vehicle · built 9 Jan 2019 to 3 Feb 2019

Front headlamps full LED version headlamp vertical beam out of compliance.

Fix: Check and adjustment of the front headlamp vertical beam.

320 vehicles · built 11 Aug 2017 to 21 Feb 2019

Blind spot detection system has been marked with the wrong ECE certification labelling.

Fix: Attaching the correct label to the left and right rear blind spot sensors and within the owners quick reference guide.

11 vehicles · built 10 Oct 2018 to 12 Oct 2018

Possible incorrect welding due to human error of the 4 sections of the front engine under frame. This has been caused by an interruption in the welding process Possible brake of the welds Sub-frame can lost the correct alignment and the vehicle could lose the stability

Fix: Inspection of the welded points if welding Is defective replacement of the front sub-frame required

1 vehicle · built 4 Dec 2017 to 4 Dec 2017

The short hose on the pipe between the turbocharger and the intercoolers could break during the normal use of the vehicle. This could result in loss of performance and cause the check engine light to illuminate as the hose material may not conform to manufacturers specification.

Fix: Replace the short hose on the pipe between the turbocharger and the intercoolers. In some cases the replacement of the entire intercooler pipe will be necessary; this will be determined by the VIN number.

125 vehicles · built 19 Sep 2016 to 2 Jan 2017

Some vehicles may have been manufactured with an incorrect driver seat wiring harness layout which can cause the seat wiring harness to rub against metal points on the seat/seat frame assembly through normal seat adjustment operation. Over time this can lead to an inoperative seat adjustment system and in rare cases a potential risk of fire due to an electrical short to ground between the seat wiring harness and the seat adjustment motor assembly.

Fix: Replace 2 seat circuit breakers with 25 amp mini-fuses check harness apply protective barrier and reposition if undamaged. If damaged replace harness and then ensure repositioned and protective barrier applied.

3,844 vehicles · built 7 Feb 2013 to 24 Nov 2016