Skip to content
My MOT CheckerSources

Recalls / Mazda

Mazda MAZDA2 recalls

DVSA has published 6 safety recalls that name the Mazda MAZDA2 since 2017, 1 of them since 2020. Between them they cover at least 139,752 UK vehicles of this model.

Is your MAZDA2 affected? Check the exact vehicle

All Mazda MAZDA2 recalls, newest first

  1. CX-3, CX-5, MAZDA2, MAZDA3, MAZDA6, MX5 · low pressure fuel pump impeller might become deformed

    4 Jan 2022 · R/2021/435

    The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

    Fix: Replace the low-pressure fuel pump with an improved part.

    26,974 vehicles · built 18 Oct 2017 to 20 Oct 2018

  2. MAZDA2 · takata passenger airbag inflators may not operate as intended

    19 Nov 2018 · R/2018/319

    Passenger airbag inflators may not operate as intended.

    Fix: Replacement of Airbag Assembly on affected vehicles.

    89,746 vehicles · built 17 Jul 2007 to 3 Nov 2014

  3. MAZDA2 · vehicles may be fitted with an incorrect purge valve bracket

    1 Oct 2018 · R/2018/256

    Subject vehicles may be fitted with an incorrect purge valve bracket.

    Fix: Subject vehicles will be checked. If the incorrect part has been installed � the part needs to be replaced. If there is any evidence of fouling between components � the fuel pipe will also be replaced.

    1,362 vehicles · built 10 Jan 2018 to 10 May 2018

  4. CX-3, MAZDA2, MAZDA3 · software error can cause engine to fail

    2 Apr 2018 · R/2018/087

    On the subject vehicles the engine protection logic does not work properly. When the engine speed reaches maximum with no engine load present � the software is unable to cut the engine. This could in extreme cases cause catastrophic engine failure. Immediate and catastrophic engine damage may result.

    Fix: Re-program the engine protection software within the PCM.

    4,858 vehicles · built 30 Apr 2015 to 4 Nov 2017

  5. MAZDA2 · handbrake may disengage unexpectedly

    26 Jan 2018 · R/2018/017

    On the subject vehicles the tolerances of the teeth on the handbrake sector gear are outside Mazda Corporations design secifications. This reduces engagement between the handbrake sector gear and the ratchet pawl and can cause the handbrake to disengage unexpectedly. This could cause the parking brake to release unintentionally and the vehicle to move unexpectedly.

    Fix: Replacement of Handbrake lever mechanism.

    • MAZDA2: 8,081 vehicles · built 16 Jan 2017 to 28 Apr 2017
    • MAZDA2: 8,081 vehicles · built 1 Apr 2016 to 27 Dec 2016

  6. CX-3, MAZDA2 · brake hose retaining clip may fail.

    14 Jul 2017 · R/2017/203

    Surface finishing of brake hose retaining clip may be insufficient causing possibility of corrosion and failure of clip.

    Fix: Replace brake hose clips with modified ones

    650 vehicles · built 25 May 2016 to 31 May 2016

Other Mazda models

Source: DVSA recalls register, check-vehicle-recalls.service.gov.uk, copy dated 6 Sep 2026, Open Government Licence v3.0. A recall is listed here when DVSA names this model in it; the build dates on each recall say which cars it covers, and a registration check confirms your own.