Mazda recalls

On affected vehicles The brackets used to secure the fuel pipes to the engine may not be tightened sufficiently. If the engine is repeatedly operated at high speed such as during circuit driving vibrations may cause the fuel pipe to resonate potentially causing the pipe to leak. The fuel leakage may increase the risk of fire.

Fix: Replace the fuel pipe with a modified part.

6,013 vehicles · built 14 May 2015 to 28 Apr 2018

On affected vehicles improper programming of the combination meter display may cause the display to become inoperable and remain blank. This prevents the speedometer from being visible.

Fix: Reprogramming of the combination meter with modified software . However if the issue is already present replace the combination meter.

543 vehicles · built 28 Aug 2023 to 7 Feb 2025

On affected vehicles the Traction Control System (TCS)/Dynamic Stability Control (DSC) indicator light may not illuminate when abnormal yaw rate characteristics are detected due to a software diagnostic programming error. This issue does not affect vehicle drivability or braking performance.

Fix: Replace the DSC Hydraulic Unit/Control Module (HU/CM) with a modified part that includes improved software.

1,914 vehicles · built 28 Nov 2023 to 24 Feb 2025

On affected vehicles when reversing obstructions may not be detected correctly due to inappropriate software in the parking assist unit which may increase the risk of an accident.

Fix: Reprogram the parking assist unit.

720 vehicles · built 28 Nov 2023 to 20 Sep 2024

On affected vehicles When the hybrid system is powered on or the engine is started multiple warning messages may be displayed the PHEV high-voltage battery cooling system may not function as intended (only PHEV). The defroster seat belt warning and 360° view monitor functions may not operate as designed.

Fix: Reprogram the affected ECUs

5,835 vehicles · built 15 Mar 2022 to 15 Jul 2024

On affected vehicles it is possible that a warning to prompt steering wheel operation may not be indicated on the instrument cluster when the driver releases or loosely grips the steering wheel for a certain period while using the Cruising & Traffic Support.

Fix: Reprogram the instrument cluster module.

4 vehicles · built 31 May 2022 to 17 Apr 2023

On affected vehicles when the hybrid system is powered on or the engine is started multiple warning messages may be displayed the defroster seat belt warning and 360° view monitor functions may not operate the vehicle may to stall or fail to restart.

Fix: Reprogram the affected ECUs.

758 vehicles · built 28 Sep 2022 to 23 Jul 2024

On affected vehicles a fault relating to the software that controls the engine / electric motor clutch may prevent the clutch from re-engaging after braking is carried out.

Fix: Update the Transmission Control Module with revised software.

3,808 vehicles · built 28 Sep 2022 to 22 Mar 2024

On affected vehicles a fault relating to the Steering rack could result in the driver experiencing a sudden increase in the effort required to steer the vehicle.� This could increase the risk of an accident in certain circumstances.��

Fix: Reapply grease to the steering rack gear teeth and replace the worm gear spring.�

5,430 vehicles · built 15 Mar 2022 to 11 Dec 2023

On affected vehicles the images from the rear view / 360� cameras may not display.

Fix: Re-program the View Monitor Control (VMC) module with improved software.

1,135 vehicles · built 6 Jun 2023 to 2 Sep 2023

On affected vehicles the engine as well as the electric motor may shut down to failsafe mode with little or even no warning.

Fix: Update the software.

3,067 vehicles · built 15 Mar 2022 to 11 Jul 2023

On affected vehicles the images from the rear view / 360� cameras may not display.

Fix: Re-program the View Monitor Control (VMC) module with improved software.

1,135 vehicles · built 6 Apr 2023 to 23 Aug 2023

On certain vehicles the engine may fail to start while driving or when at a stop.

Fix: Reprogram the PCM with the latest applicable software version.

429 vehicles · built 28 Sep 2022 to 21 Jun 2023

Affected vehicles cannot be driven due to an error within the on-board charger which causes the vehicle to wrongly detect it is connected to an EV charge cable.

Fix: Reprogram the software of the on-board charger.

1,060 vehicles · built 19 Apr 2022 to 30 Mar 2023

On affected vehicles after decelerating/stopping while driving with the i-stop function activated the engine may not restart even when the accelerator pedal is depressed.

Fix: Reprogram the DC-AC inverter for MHEV motor ECU.

326 vehicles · built 28 Sep 2022 to 1 Feb 2023

On affected vehicles when the Hybrid system is READY ON or the vehicle power position is switched ON a blackout may occur on the instrument cluster and vehicle information such as speedometer fuel gauge and i-ACTIVSENSE status may not be displayed.

Fix: Reprogram the control software of instrument cluster with modified software.

326 vehicles · built 28 Sep 2022 to 1 Feb 2023

On affected vehicles when the Hybrid system is READY ON or the vehicle power position is switched ON a blackout may occur on the instrument cluster and vehicle information such as speedometer fuel gauge and i-ACTIVSENSE status may not be displayed.

Fix: Reprogram the control software of instrument cluster with modified software.

2,533 vehicles · built 15 Mar 2022 to 21 Jan 2023

The recall affects the load bearing collar of a certain type of option fit accessory alloy wheel whereby the collar is either missing or misaligned.

Fix: Check the wheel and check the insert alignment.

1 vehicles · built 1 Sep 2022 to 31 Dec 2022

Catalytic Reduction (SCR) system wiring may become damaged by contamination

Fix: Inspect the SCR harness repair if necessary and fit protector.

2,187 vehicles · built 15 May 2018 to 24 Sep 2020

The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

Fix: Replace the low-pressure fuel pump with an improved part.

26,974 vehicles · built 18 Oct 2017 to 20 Oct 2018

The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

Fix: Replace the low-pressure fuel pump with an improved part.

26,974 vehicles · built 18 Oct 2017 to 6 Sep 2019

The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

Fix: Replace the low-pressure fuel pump with an improved part.

26,974 vehicles · built 6 Apr 2018 to 24 Oct 2018

The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

Fix: Replace the low-pressure fuel pump with an improved part.

26,974 vehicles · built 3 Apr 2018 to 27 Oct 2018

The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

Fix: Replace the low-pressure fuel pump with an improved part.

26,974 vehicles · built 23 Apr 2018 to 26 Jan 2019

The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.

Fix: Replace the low-pressure fuel pump with an improved part.

26,974 vehicles · built 5 Apr 2018 to 30 Oct 2018

Fuel may leak from fuel pump rings.

Fix: Replace the fuel pump rings with new ones.

1,924 vehicles · built 8 Apr 2008 to 1 Jul 2010

Fuel may leak from fuel pump rings.

Fix: Replace the fuel pump rings with new ones.

1,924 vehicles · built 28 Jul 2005 to 30 Jul 2007

The plastic logo on the steering wheel centre may shatter and project fragments into the vehicle interior during an air bag deployment.

Fix: The airbag module cover is to be replaced with an improved part.

36,741 vehicles · built 19 May 2020 to 24 Nov 2020

The front passenger main frontal airbag could split at the seam and may not deploy correctly when the airbag is activated in a collision.

Fix: Replace the airbag with an improved version

29 vehicles · built 19 May 2020 to 24 Nov 2020

The powered tailgate may partially lower unexpectedly from the fully opened position in certain situations.

Fix: Inspect the production information and update the software of the power tailgate drive unit. Where necessary replace the power tailgate drive unit.

7,126 vehicles · built 25 Apr 2019 to 15 Oct 2020

One or both LED daytime Running Lamps may flicker flash or fail completely.

Fix: Replace sealing gaskets and install gas absorbing sheets on affected units that operate normally. Replace any faulty units.

4,566 vehicles · built 11 Dec 2014 to 8 Dec 2015

The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.

Fix: Replace the airbag inflator or the airbag assembly. Mazda is still preparing for the development and production of the remedy parts.

1,649 vehicles · built 20 Jun 1996 to 15 Nov 1999

The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.

Fix: Replace the airbag inflator or the airbag assembly. Mazda is still preparing for the development and production of the remedy parts.

1,649 vehicles · built 1 Feb 1999 to 7 Oct 1999

Vehicles may unexpectedly stop due to inadvertent activation of the automated Smart Brake Support (SBS) system

Fix: The vehicle control module is reprogrammed with modified software.

7,604 vehicles · built 6 Nov 2018 to 19 Oct 2019

The engine may stall or fail to restart in some driving situations

Fix: PCM is reprogrammed with modified software

3,047 vehicles · built 7 Nov 2018 to 5 Sep 2019

Vehicles may unexpectedly stop due to inadvertent activation of the automated Smart Brake Support (SBS) system

Fix: The vehicle control module is reprogrammed with modified software.

7,604 vehicles · built 25 Apr 2019 to 19 Oct 2019

Software controlling the engine air / fuel ratio contains an error.

Fix: Reprogram the PCM with modified software.

453 vehicles · built 14 Jun 2019 to 1 Oct 2019

The metal bracket used to secure an under shield may separate from the vehicle.

Fix: Replacement of the front under shield with a modified part

968 vehicles · built 26 May 2015 to 6 Jul 2015

The interior rear view mirror glass could suddenly detach from the mirror assembly.

Fix: Replace interior mirror with alternative part.

125 vehicles · built 4 Dec 2018 to 20 Mar 2019

The software controlling the hydraulic valve clearance adjuster may operate incorrectly.

Fix: Reprogram the system with improved hydraulic valve adjustment control software.

2,252 vehicles · built 7 Nov 2018 to 13 May 2019

The software controlling the hydraulic valve clearance adjuster may operate incorrectly.

Fix: Reprogram the system with improved hydraulic valve adjustment control software.

2,252 vehicles · built 26 Mar 2018 to 22 Apr 2019

The airbag and seat belt minder indicator unit may display incorrect information

Fix: Replace the indicator unit assembly with one incorporating improved software

568 vehicles · built 6 Nov 2018 to 7 Mar 2019

A manufacturing defect may cause the wheel nuts to loosen

Fix: Re-tighten the wheel nuts to the correct torque

1,379 vehicles · built 7 Nov 2018 to 13 May 2019

Soot may accumulate around the intake shutter valve on the inlet side of the engine.

Fix: Check clean or replace the intake shutter valve and update software.

70,435 vehicles · built 26 Jan 2012 to 30 Jun 2018

Soot may accumulate around the intake shutter valve on the inlet side of the engine.

Fix: Check clean or replace the intake shutter valve and update software.

70,435 vehicles · built 26 Jan 2012 to 30 Jun 2018

Soot may accumulate around the intake shutter valve on the inlet side of the engine.

Fix: Check clean or replace the intake shutter valve and update software.

70,435 vehicles · built 26 Jan 2012 to 30 Jun 2018

The front windscreen wipers may become inoperable due to a defect in the relay.

Fix: Replacement of the front body control module with an improved wiper relay design.

19,467 vehicles · built 26 May 2016 to 11 Jul 2017

The front windscreen wipers may become inoperable due to a defect in the relay.

Fix: Replacement of the front body control module with an improved wiper relay design.

19,467 vehicles · built 20 Jul 2015 to 11 Jul 2017

Automatic Transmission may unexpectedly downshift.

Fix: Reprogram of the software contained within the Transmission Control Module.

697 vehicles · built 5 Oct 2016 to 22 Nov 2018

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

1,267 vehicles · built 1 Jan 2007 to 12 Jun 2009

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

25,435 vehicles · built 3 Aug 2007 to 29 Jan 2010

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

89,746 vehicles · built 17 Jul 2007 to 3 Nov 2014

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

1,900 vehicles · built 2 May 2006 to 22 Sep 2011

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

26,261 vehicles · built 28 Jul 2003 to 1 Jul 2010

Subject vehicles may be fitted with an incorrect purge valve bracket.

Fix: Subject vehicles will be checked. If the incorrect part has been installed � the part needs to be replaced. If there is any evidence of fouling between components � the fuel pipe will also be replaced.

1,362 vehicles · built 10 Jan 2018 to 10 May 2018

Driver airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

27,262 vehicles · built 3 Jun 2002 to 30 Jun 2005

On the subject vehicles the passenger airbag inflators may not operate as intended.

Fix: Replacement of passenger airbag Assembly

1,500 vehicles · built 3 Jun 2002 to 30 Jun 2005

Driver and Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly.

15,017 vehicles · built 31 Mar 2006 to 28 Sep 2007

The vacuum pump may wear prematurely meaning that in some applications where the brake pedal is pressed quickly whilst at low engine speed � the servo assistance provided by the vacuum system in decreased. This could cause a momentary decrease in braking performance. Braking assistance available to the driver can be reduced

Fix: Vehicles affected will be fitted with a modified Vacuum pump.

11,498 vehicles · built 26 Jan 2012 to 21 Jan 2016

The Software controlling the fuel injectors does not control the electric current correctly. This may cause the injector control circuit to short circuit and cause the engine to stall. Results in possible Engine Stall without Warning

Fix: Vehicles affected will have the injector control software re-programmed

48,875 vehicles · built 26 Jan 2012 to 21 Jan 2016

The tightening force of the injector mounting nuts may be insufficient. This could cause combustion gas to leak from the injector and contaminate the engine oil within the cylinder head. This in turn could cause the engine oil strainer to become blocked. This could cause the engine to stall. Engine Pressure Oil Light appears along with the engine malfunction indicator. Possible Engine Stall without Warning

Fix: Vehicles affected will have the engine checked for contamination and repaired / replaced if necessary. The Fuel injectors will also be re-tightened to the appropriate torque.

11,021 vehicles · built 26 Jan 2012 to 21 Jan 2016

The tightening force of the injector mounting nuts may be insufficient. This could cause combustion gas to leak from the injector and contaminate the engine oil within the cylinder head. This in turn could cause the engine oil strainer to become blocked. This could cause the engine to stall. Engine Pressure Oil Light appears along with the engine malfunction indicator. Possible Engine Stall without Warning

Fix: Vehicles affected will have the engine checked for contamination and repaired / replaced if necessary. The Fuel injectors will also be re-tightened to the appropriate torque.

11,021 vehicles · built 26 Jan 2012 to 21 Jan 2016

The Software controlling the fuel injectors does not control the electric current correctly. This may cause the injector control circuit to short circuit and cause the engine to stall. Results in possible Engine Stall without Warning

Fix: Vehicles affected will have the injector control software re-programmed

48,875 vehicles · built 26 Jan 2012 to 21 Jan 2016

On the subject vehicles the control logic which monitors the charging control program fails to divert the electrical power away from the capacitor when a fault is detected within the capacitor circuit. This can cause a short circuit inside the DCDC converter and could cause the engine to stall or overheating of the DCDC converter itself which could cause a fire. The fault is accompanied by the �i-ELOOP� warning light being illuminated on the instrument cluster along with the �i-Stop� warning light flashing The engine may in some circumstances stall and fail to restart. In extreme cases the DCDC converter could overheat and cause a fire

Fix: Reprogram the PCM with the correct control logic. If error code �U3000: 49-DCDC� is stored � the DCDC Converter must also be replaced.

965 vehicles · built 15 May 2015 to 13 Apr 2017

On the subject vehicles the control logic which monitors the charging control program fails to divert the electrical power away from the capacitor when a fault is detected within the capacitor circuit. This can cause a short circuit inside the DCDC converter and could cause the engine to stall or overheating of the DCDC converter itself which could cause a fire. The fault is accompanied by the �i-ELOOP� warning light being illuminated on the instrument cluster along with the �i-Stop� warning light flashing The engine may in some circumstances stall and fail to restart. In extreme cases the DCDC converter could overheat and cause a fire

Fix: Reprogram the PCM with the correct control logic. If error code �U3000: 49-DCDC� is stored � the DCDC Converter must also be replaced.

965 vehicles · built 11 Feb 2015 to 13 Apr 2017

The tightening force of the injector mounting nuts may be insufficient. This could cause combustion gas to leak from the injector and contaminate the engine oil within the cylinder head. This in turn could cause the engine oil strainer to become blocked. This could cause the engine to stall. Engine Pressure Oil Light appears along with the engine malfunction indicator. Possible Engine Stall without Warning

Fix: Vehicles affected will have the engine checked for contamination and repaired / replaced if necessary. The Fuel injectors will also be re-tightened to the appropriate torque.

11,021 vehicles · built 26 Jan 2012 to 21 Jan 2016

The vacuum pump may wear prematurely meaning that in some applications where the brake pedal is pressed quickly whilst at low engine speed � the servo assistance provided by the vacuum system in decreased. This could cause a momentary decrease in braking performance. Braking assistance available to the driver can be reduced

Fix: Vehicles affected will be fitted with a modified Vacuum pump.

11,498 vehicles · built 26 Jan 2012 to 21 Jan 2016

The vacuum pump may wear prematurely meaning that in some applications where the brake pedal is pressed quickly whilst at low engine speed � the servo assistance provided by the vacuum system in decreased. This could cause a momentary decrease in braking performance. Braking assistance available to the driver can be reduced

Fix: Vehicles affected will be fitted with a modified Vacuum pump.

11,498 vehicles · built 26 Jan 2012 to 21 Jan 2016

The Software controlling the fuel injectors does not control the electric current correctly. This may cause the injector control circuit to short circuit and cause the engine to stall. Results in possible Engine Stall without Warning

Fix: Vehicles affected will have the injector control software re-programmed

48,875 vehicles · built 26 Jan 2012 to 21 Jan 2016

On the subject vehicles the Takata Driver and Passenger airbag inflators may not operate as intended Injury may result due to incorrect deployment of the Airbag

Fix: Replacement of Airbag Assembly

19,851 vehicles · built 1 Mar 2002 to 31 Dec 2007

On the subject vehicles the engine protection logic does not work properly. When the engine speed reaches maximum with no engine load present � the software is unable to cut the engine. This could in extreme cases cause catastrophic engine failure. Immediate and catastrophic engine damage may result.

Fix: Re-program the engine protection software within the PCM.

4,858 vehicles · built 30 Apr 2015 to 4 Nov 2017

On the subject vehicles the engine protection logic does not work properly. When the engine speed reaches maximum with no engine load present � the software is unable to cut the engine. This could in extreme cases cause catastrophic engine failure. Immediate and catastrophic engine damage may result.

Fix: Re-program the engine protection software within the PCM.

4,858 vehicles · built 30 Apr 2015 to 4 Nov 2017

On the subject vehicles the engine protection logic does not work properly. When the engine speed reaches maximum with no engine load present � the software is unable to cut the engine. This could in extreme cases cause catastrophic engine failure. Immediate and catastrophic engine damage may result.

Fix: Re-program the engine protection software within the PCM.

4,858 vehicles · built 30 Apr 2015 to 4 Nov 2017

On the subject vehicles the resin fuel pump rings located on the top surface of the fuel tank may deteriorate by heat from the engine and exhaust pipes. Over time this deterioration could cause the fuel tank to leak which may increase the risk a vehicle fire. The resin fuel pump discharge pipe mounted to the upper part of the fuel pump body (within the fuel tank) may also deteriorate following exposure to heat from the engine and exhaust systems. This deterioration may cause the pipe to crack creating a fuel leak which could increase the risk of a vehicle fire. Fuel may leak from either the upper surface of the fuel tank and /or the fuel pump discharge pipe. In the worst case this may result in a fuel leak. This in turn could increase the risk of a vehicle fire.

Fix: Replacement of the resin fuel pump rings and the fitment of heat insulating pads on the upper surface of the fuel tank to prevent future deterioration by heat of the engine and exhaust systems. The fuel pump filter body will also be replaced with a modified version in order to address the concern of the deterioration of the fuel discharge pipe.

25,190 vehicles · built 28 Jul 2003 to 8 Feb 2008

The front lower arm ball joint casting may have a crack due to inappropriate manufacturing process being used. In extreme driving conditions this could cause the casting to break and the ball joint to become detached. If this happens it could result in the driver losing control of the vehicle.

Fix: Replace both left side and right side lower arms with modified units.

8,030 vehicles · built 28 Jul 2003 to 7 May 2004

On the subject vehicles the tolerances of the teeth on the handbrake sector gear are outside Mazda Corporations design secifications. This reduces engagement between the handbrake sector gear and the ratchet pawl and can cause the handbrake to disengage unexpectedly. This could cause the parking brake to release unintentionally and the vehicle to move unexpectedly.

Fix: Replacement of Handbrake lever mechanism.

8,081 vehicles · built 16 Jan 2017 to 28 Apr 2017

On the subject vehicles the tolerances of the teeth on the handbrake sector gear are outside Mazda Corporations design secifications. This reduces engagement between the handbrake sector gear and the ratchet pawl and can cause the handbrake to disengage unexpectedly. This could cause the parking brake to release unintentionally and the vehicle to move unexpectedly.

Fix: Replacement of Handbrake lever mechanism.

8,081 vehicles · built 1 Apr 2016 to 27 Dec 2016

On the subject vehicles corrosion may form around the parking brake actuating shaft within the rear brake caliper. This could cause the handbrake to become difficult to operate (greater force required at the lever) or in some cases prevent the parking brake assembly from applying sufficient force at the rear wheels and cause a failure to hold the vehicle. Insufficient force to hold vehicle stationary causing unintentional and unexpected movement of the vehicle.

Fix: Inspect the parking brake actuation lever. If no corrosion is found replace the protective boot with a modified assembly. If corrosion is found on the actuating shaft replace the brake caliper.

12,989 vehicles · built 31 Jul 2012 to 18 Nov 2014

Water could enter the front lower suspension ball joint which can cause noise from front suspension and in worst-case failure of lower ball joint. If this occurs directional control could be impaired.

Fix: Recall the vehicles that are likely to be affected and replace the lower suspension arm (which includes lower ball joint).

3,188 vehicles · built 8 May 2007 to 7 Aug 2012

Surface finishing of brake hose retaining clip may be insufficient causing possibility of corrosion and failure of clip.

Fix: Replace brake hose clips with modified ones

650 vehicles · built 20 May 2016 to 31 May 2016

Surface finishing of brake hose retaining clip may be insufficient causing possibility of corrosion and failure of clip.

Fix: Replace brake hose clips with modified ones

650 vehicles · built 25 May 2016 to 31 May 2016

Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.

Fix: Replace both tailgate struts on affected vehicles

121,812 vehicles · built 2 Oct 2007 to 31 Aug 2012

Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.

Fix: Replace both tailgate struts on affected vehicles

121,812 vehicles · built 10 Feb 2015 to 26 Dec 2015

Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.

Fix: Replace both tailgate struts on affected vehicles

121,812 vehicles · built 17 Nov 2011 to 26 Dec 2015

Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.

Fix: Replace both tailgate struts on affected vehicles

121,812 vehicles · built 4 Dec 2007 to 25 Dec 2015

Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.

Fix: Replace both tailgate struts on affected vehicles

121,812 vehicles · built 16 Jun 2010 to 1 Apr 2015

One or more of the mounting points between the runner and the driver�s seat may fail.

Fix: On affected vehicles inspect the driver�s seat frame to determine if seat lifter links are damaged. If no damage is evident fit reinforcement brackets and �push nuts�. If damage is present to the seat lifter link replace seat frame. If damage is restricted to stabilizer bar then the bar will be repaired plus brackets and� push nuts� fitted.

95,172 vehicles · built 3 Feb 2009 to 30 Sep 2010

One or more of the mounting points between the runner and the driver�s seat may fail.

Fix: On affected vehicles inspect the driver�s seat frame to determine if seat lifter links are damaged. If no damage is evident fit reinforcement brackets and �push nuts�. If damage is present to the seat lifter link replace seat frame. If damage is restricted to stabilizer bar then the bar will be repaired plus brackets and� push nuts� fitted.

95,172 vehicles · built 5 Sep 2007 to 31 Aug 2010

Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.

Fix: Replace both tailgate struts on affected vehicles

121,812 vehicles · built 17 Feb 2008 to 10 Aug 2013

One or more of the mounting points between the runner and the driver�s seat may fail.

Fix: On affected vehicles inspect the driver�s seat frame to determine if seat lifter links are damaged. If no damage is evident fit reinforcement brackets and �push nuts�. If damage is present to the seat lifter link replace seat frame. If damage is restricted to stabilizer bar then the bar will be repaired plus brackets and� push nuts� fitted.

95,172 vehicles · built 25 Jun 2007 to 11 Sep 2010

It has been identified that the density of the propellant within the airbag inflator may be insufficient due to inappropriate production and storage conditions of the propellant. In this condition the inflator may abnormally ignite at the time of the airbag deployment allowing the inner pressure of the inflator to increase abnormally resulting in the breakage of the inflator case. In this condition the airbags will not provide adequate protection during a frontal impact as the broken pieces of the inflator case could injure the driver and/or front seat passenger.

Fix: Recall all affected vehicles to replace the driver and passenger front airbag inflators with modified units.

12,306 vehicles · built 14 Mar 2005 to 9 Apr 2007

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles · built 1 Jan 1989 to 31 Dec 2002

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles · built 1 Jan 1989 to 31 Dec 2002

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles · built 1 Jan 1989 to 31 Dec 2002

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles · built 1 Jan 1989 to 31 Dec 2002

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles · built 1 Jan 1989 to 31 Dec 2002

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

Fix: On affected vehicles replace the ignition switch.

84,062 vehicles · built 1 Jan 1989 to 31 Dec 2002

On affected vehicles silicone may have adhered to the welding surface of the rollover valve (ROV) fitted to the fuel tank during production The presence of silicone may have an effect on the welding causing the possibility of a fuel leak.

Fix: Replace fuel tank on affected vehicles.

1,489 vehicles · built 6 Jan 2015 to 31 Jan 2015

Silicone may have adhered to the welding surface of the roll-over valve (ROV) fitted to the fuel tank. The presence of silicone may have an effect on the welding causing the possibility of a fuel leak.

Fix: On affected vehicles replace the fuel tank.

1,489 vehicles · built 6 Jan 2015 to 31 Jan 2015

The lower nut & bolt securing the front shock absorber to the steering knuckle on either side of the affected vehicles may not have been tightened to specification. The bolt may work loose causing a rattling sound and could fall out.

Fix: On affected vehicles replace bolts retaining the front shock absorbers to steering knuckles

99 vehicles · built 19 Dec 2012 to 28 Oct 2014

Continued exposure to high levels of absolute humidity may cause the driver�s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver�s front airbag. Should the inflator rupture it could result in metal fragments striking the driver or other vehicle occupants.

Fix: On affected vehicles replace air bag inflator

32,030 vehicles · built 1 Feb 2003 to 1 Feb 2008

Continued exposure to high levels of absolute humidity may cause the driver�s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver�s front airbag. Should the inflator rupture it could result in metal fragments striking the driver or other vehicle occupants.

Fix: On affected vehicles replace air bag inflator

32,030 vehicles

Continued exposure to high levels of absolute humidity may cause the driver�s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver�s front airbag. Should the inflator rupture it could result in metal fragments striking the driver or other vehicle occupants.

Fix: On affected vehicles replace air bag inflator

32,030 vehicles · built 14 Jan 2004 to 31 Aug 2006

Engine may not restart when customer expects after i-stop operation. Although check engine light on dashboard will illuminate.

Fix: Recall the vehicles that are likely to be affected and re-programme the engine Power Control Module (PCM) with a modified calibration.

394 vehicles · built 30 Oct 2013 to 28 Feb 2014

Engine may not restart when customer expects after i-stop operation. Although check engine light on dashboard will illuminate.

Fix: Recall the vehicles that are likely to be affected and re-programme the engine Power Control Module (PCM) with a modified calibration.

394 vehicles · built 30 Oct 2013 to 28 Feb 2014

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.

11,627 vehicles · built 14 Feb 2002 to 30 Jun 2003

Water may enter the glow plug control module due to poor sealing of the waterproof connecter for the front harness. In some cases the glow plug control module could get corroded due to the water ingress and in the worst case there is a possibility that the glow plug control module could melt resulting in a vehicle fire.

Fix: A Mazda dealer will inspect the glow plug control module and if necessary replace the glow plug control module. Also the installation location of the glow plug control module will be changed to prevent future water ingress.

1,031 vehicles · built 1 Oct 2010 to 7 Nov 2012

A ceramic condenser required for noise suppression located within the DC-DC converter may have a crack within it causing the condenser to short circuit. It is possible that the DC-DC converter may melt and generate smoke and in the worst case cause a vehicle fire. This converter is located under the front passenger seat.There is small possibility that the DC-DC converter may melt resulting in a vehicle fire

Fix: A Mazda dealer will replace the DC-DC converter with a modified one.

1,974 vehicles · built 31 Jul 2012 to 9 Mar 2013

The throttle valve may become stuck when the accelerator pedal is fully or almost fully depressed leading to possible unintentional increase of engine speed. This is caused by interference of the cruise control cable connector with the engine cover.

Fix: Modify the engine cover to prevent the cover from interfering with the cruise control cable.

499 vehicles · built 9 Feb 2001 to 9 Jan 2004

Front windscreen motor may suddenly stop operating. The cause of the problem is due to a poor electrical earth connection.

Fix: The remedy is a fitment of an additional earth wire between the wiper motor and body of the vehicle.

11,354 vehicles · built 7 Jan 2008 to 22 Dec 2008

It is possible that the clips retaining the piston pins were not fitted correctly during engine assembly. The pins may come out of position and wear the cylinder bores. In the worst case the engine will stop and not restart.

Fix: Recall the vehicles that are likely to be affected to fit new connecting rods and pistons.

161 vehicles · built 8 Jan 2008 to 12 Feb 2008

It is possible that due to cleaning process of the fuel tank water may have built up between the fuel pump and wiring harness connectors which can cause corrosion of the connector pins. In the extreme cases corrosion could result in an inoperative fuel pump which could cause the engine to stall or the inability to start.

Fix: Recall all affected vehicles and inspect the connectors for corrosion. If corrosion or damage is found a short section of the wiring harness and fuel pump top section will be replaced.

1,518 vehicles · built 29 Jun 2009 to 28 Apr 2010

The bracket that secures the automatic transmission shift cable to the transmission casing may crack and break. This is as a result of unnecessary welding. Should the bracket fail then gear selection witl be extremely difficult or in extreme cases impossible.

Fix: Recall all affected vehicles and check the bracket. If the bracket has been welded then replacement of the bracket is required.

74 vehicles · built 30 Jul 2008 to 31 Jul 2008

It is possible that white smoke can occur from the exhaust pipe and engine speed may increase whilst driving.

Fix: Recall affected vehicles and replace Power Control Module.

15,854 vehicles · built 27 Apr 2005 to 28 Sep 2007

It is possible that white smoke can occur from the exhaust pipe and engine speed may increase whilst driving.

Fix: Recall affected vehicles and replace Power Control Module.

15,854 vehicles · built 26 Dec 2006 to 5 Nov 2008

It is possible that white smoke can occur from the exhaust pipe and engine speed may increase whilst driving.

Fix: Recall affected vehicles and replace Power Control Module.

15,854 vehicles · built 26 Apr 2005 to 1 Nov 2007

It is possible that white smoke can occur from the exhaust pipe and engine speed may increase whilst driving.

Fix: Recall affected vehicles and replace Power Control Module.

15,854 vehicles · built 19 Apr 2005 to 3 Sep 2007

It has been identified that the number 4 engine mounting bolt may not have been tightened to the correct torque during production. This could result in the engine mounting failing under sudden acceleration.

Fix: Recalled vehicles will have the mounting bolt checked for compliance. Should the torque on the subject bolt be found to be outside of the specification.The appropriate action as described in the technical instruction will be applied as necessary.

3,965 vehicles · built 26 Dec 2006 to 6 Sep 2007

It has been identified that the number 4 engine mounting bolt may not have been tightened to the correct torque during production. This could result in the engine mounting failing under sudden acceleration.

Fix: Recalled vehicles will have the mounting bolt checked for compliance. Should the torque on the subject bolt be found to be outside of the specification.The appropriate action as described in the technical instruction will be applied as necessary.

3,965 vehicles · built 19 Apr 2005 to 3 Sep 2007

No 4 Engine mounting tightening bolt may loosen if a sudden acceleration is repeatedly carried out. If vehicle is continually used under such conditions No 4 mounting bolt may drop off and break allowing transmission to be out of position and in the worst case the driveshaft may detach resulting in loss of drive.

Fix: Recall affected vehicles to check mounting bolt torque and if necessary replace bolt with modified version.

430 vehicles · built 13 Jul 2006 to 16 May 2007

The airbag warning lamp may illuminate. Airbag activation system is disabled. In worst case the airbag may be activated unintentionally.

Fix: Recall the vehicles that are likely to be affected to replace the central processing unit.

2,265 vehicles · built 12 Jul 2001 to 31 Jan 2002

The airbag warning lamp may illuminate. Airbag activation system is disabled. In worst case the airbag may be activated unintentionally.

Fix: Recall the vehicles that are likely to be affected to replace the central processing unit.

2,265 vehicles · built 7 Jun 2002 to 22 Jun 2002

The airbag warning lamp may illuminate. Airbag activation system is disabled. In worst case the airbag may be activated unintentionally.

Fix: Recall the vehicles that are likely to be affected to replace the central processing unit.

2,265 vehicles · built 24 Apr 2002 to 24 Jun 2002

The airbag warning lamp may illuminate. Airbag activation system is disabled. In worst case the airbag may be activated unintentionally.

Fix: Recall the vehicles that are likely to be affected to replace the central processing unit.

2,265 vehicles · built 7 Jun 2002 to 7 Jun 2002

The airbag warning lamp may illuminate. Airbag activation system is disabled. In worst case the airbag may be activated unintentionally.

Fix: Recall the vehicles that are likely to be affected to replace the central processing unit.

2,265 vehicles · built 11 May 2002 to 24 Jun 2002

The airbag warning lamp may illuminate. Airbag activation system is disabled. In worst case the airbag may be activated unintentionally.

Fix: Recall the vehicles that are likely to be affected to replace the central processing unit.

2,265 vehicles · built 17 Jul 2001 to 31 Jan 2002

It has been identified that on a small number of vehicles the oil feed in the cylinder head and camshaft carrier may not be correctly aligned allowing the oil flow to be restricted. If this this allowed to continue it is likely to result in an engine malfunction when the mileage exceeds 62000.

Fix: Recalled vehicles will be checked for their presence in the affected range and fitted with a new partial engine if so identified.

181 vehicles · built 8 Apr 2004 to 8 Sep 2004

It is possible for the camshaft sensor plate mounting bolts to loosen. If the vehicle continues to be used in this condition the sensor plate and bolts may fall off resulting in an engine stall and inability to restart.

Fix: Recall the vehicles that are likely to be affected and tighten the sensor plate to the specified torque. Only replace parts if they are seen to be damaged.

2,005 vehicles · built 3 Oct 2005 to 29 Dec 2005

It is possible for the camshaft sensor plate mounting bolts to loosen. If the vehicle continues to be used in this condition the sensor plate and bolts may fall off resulting in an engine stall and inability to restart.

Fix: Recall the vehicles that are likely to be affected and tighten the sensor plate to the specified torque. Only replace parts if they are seen to be damaged.

2,005 vehicles · built 3 Oct 2005 to 29 Dec 2005

It is possible for the camshaft sensor plate mounting bolts to loosen. If the vehicle continues to be used in this condition the sensor plate and bolts may fall off resulting in an engine stall and inability to restart.

Fix: Recall the vehicles that are likely to be affected and tighten the sensor plate to the specified torque. Only replace parts if they are seen to be damaged.

2,005 vehicles · built 3 Oct 2005 to 29 Dec 2005

In certain cases; a vehicle which has been parked with the engine operating at high revs for an excessive length of time can suffer melting of some parts surrounding the exhaust system. In consequence this can result in a variety of malfunctions including heat damage to the fuel tank.

Fix: Recalled vehicles will have the heat insulator pad attached to the fuel tank and power control module upgraded.

15,054 vehicles · built 13 Apr 2005 to 1 Jul 2005

In certain cases; a vehicle which has been parked with the engine operating at high revs for an excessive length of time can suffer melting of some parts surrounding the exhaust system. In consequence this can result in a variety of malfunctions including heat damage to the fuel tank.

Fix: Recalled vehicles will have the heat insulator pad attached to the fuel tank and power control module upgraded.

15,054 vehicles · built 28 Jul 2003 to 20 Dec 2004

It is possible that cracks may occur in the ball joint socket of the lower suspension arm. Which under certain severe driving conditions may cause the ball to separate from the ball joint socket and a loss of steering may occur.

Fix: Recalled vehicles will be inspected to ascertain if the lower suspension arm fitted is of the affected type. If this is shown to be the case the part will be changed for a quality assured item.

4,621 vehicles · built 28 Jul 2003 to 27 Dec 2003

The radiation of heat from the exhaust pipe may cause heat deterioration of the high pressure steering hoses. This will result in cracking of the hoses and the leak of steering fluid.

Fix: Replace the high-pressure hoses on all the affected vehicles with ones fitted with additional heat resistance material.

537 vehicles · built 20 Aug 1999 to 26 Oct 2001

The possibility exists that the power steering oil pump pulley retaining nut may become loose resulting if the vehicle continues to be driven in the pulley becoming detached. In the worst case due to loss of drive to the water pump the engine may seize.

Fix: Recall likely to be affected vehicles and replace the pulley retaining nut with a modified version which will be loctited in place and tightened to an increased torque.

79 vehicles · built 4 Mar 2003 to 30 Oct 2003

The injector oil seal on the cylinder head cover may detach leading to heavy oil consumption and eventually if the oil pressure warning light is ignored engine seizure.

Fix: Recall affected vehicles and replace the cylinder head cover with a modified one.

1,517 vehicles · built 5 Aug 2003 to 7 Nov 2003

The injector oil seal on the cylinder head cover may detach leading to heavy oil consumption and eventually if the oil pressure warning light is ignored engine seizure.

Fix: Recall affected vehicles and replace the cylinder head cover with a modified one.

1,517 vehicles · built 29 Aug 2003 to 7 Nov 2003

It has been found that the clearance between the fuel tank insulator and the exhaust pipe is insufficient. During driving this may give rise to an increase in temperature around the fuel tank which may suffer reduced rigidity. At the same time the inner pressure of the fuel tank may increase causing the fuel tank and exhaust insulator to make contact. Should the surface temperature of the fuel tank exceed it's maximum permissible range partial melting may occur which could result in a fuel leak.

Fix: Recall affected vehicles and fit an insulator kit between the exhaust and the fuel tank.

18,279 vehicles · built 14 Feb 2002 to 16 Feb 2004

The dynamic damper heat insulator which is installed on the manual transmission may crack causing abnormal noise. In the worst case the insulator may become detached.

Fix: Recall the affected vehicles and replace the insulator with a modified one.

119 vehicles · built 28 Jul 2003 to 29 Aug 2003

It is possible that the driver and/or front seat passenger seat belt buckle cannot be latched or will not remain latched.

Fix: Fit new seat belts where necessary.

302 vehicles

Repeated thermal expansion and shrinkage in use may cause the front fog light socket holder to become detached from the fog light case. As a consequence an exposed hot bulb may come into contact with part of the vehicle body or fittings.

Fix: Attach a spring to the rear of the fog light to prevent the socket holder detaching from the fog light case.

28,339 vehicles

Repeated thermal expansion and shrinkage in use may cause the front fog light socket holder to become detached from the fog light case. As a consequence an exposed hot bulb may come into contact with part of the vehicle body or fittings.

Fix: Attach a spring to the rear of the fog light to prevent the socket holder detaching from the fog light case.

28,339 vehicles

Repeated thermal expansion and shrinkage in use may cause the front fog light socket holder to become detached from the fog light case. As a consequence an exposed hot bulb may come into contact with part of the vehicle body or fittings.

Fix: Attach a spring to the rear of the fog light to prevent the socket holder detaching from the fog light case.

28,339 vehicles

The brake fluid reservoir may expand temporarily during pressure bleeding of the system. This may cause the float of the fluid level sensor to seize or be displaced - resulting in non-operation of the warning light.

Fix: Check position and operation of the float and adjust where necessary. Additionally attach a caution label to the reservoir concerning the brake fluid bleeding pressure.

16,332 vehicles

The front steering knuckle may be cracked in the area where it connects to the front tie rod ball joint. In a worst case failure directional control of the vehicle could be affected.

Fix: Examine potentially affected vehicles and fit new steering knuckles where found necessary.

62 vehicles · built 8 May 2002 to 23 May 2002

A surging noise from the air conditioner clutch may be interpreted as a fuel pressure leak by the engine management sensors. This will activate the fail safe system and shut the engine down.

Fix: Install a short cord (with condensor) in the air-conditioner magnetic clutch wiring harness.

2,173 vehicles · built 3 Jun 2002 to 28 Nov 2002

Oil has remained on the stop lamp switch bracket during assembly. The oil deposit can cause the switch contacts to to carbonise. Due to this the stop lamp may not turn on even if the brake pedal is depressed.

Fix: VEHICLES WITHOUT CRUISE CONTROL:- Clean the oil off of the switch bracket and fit a new stop lamp switch. VEHICLES WITH CRUISE CONTROL:- Clean the oil off of the switch bracket and fit a new stop lamp switch and cruise control cancel switch.

982 vehicles · built 2 Apr 2001 to 18 Jun 2002

The engine may fail to start or may stop without warning whilst driving due to a fault in the engine immobiliser.

Fix: Recall affected vehicles and fit a quality assured replacement engine immobiliser.

1,098 vehicles

The engine may fail to start or may stop without warning whilst driving due to a fault in the engine immobiliser

Fix: Recall affected vehicles and fit a quality assured replacement engine immobiliser. This recall only affects UK spec vehicles.

787 vehicles

The rivets securing the fuel tank heatshield may corrode and break causing the heatshield to rattle excessively.

Fix: Recall affected vehicles and replace rivets with nuts and bolts.

20,348 vehicles

The rivets securing the fuel tank heatshield may corrode and break causing the heatshield to rattle excessively.

Fix: Recall affected vehicles and replace rivets with nuts and bolts.

20,348 vehicles

The camshaft drive belt may break and cause the engine to stop suddenly.

Fix: Recall affected vehicles and fit a quality assured cam belt.

648 vehicles · built 1 May 1998 to 31 Aug 1999

The camshaft drive belt may break and cause the engine to stop suddenly.

Fix: Recall affected vehicles and fit a quality assured cam belt.

648 vehicles · built 1 May 1998 to 31 Aug 1999

The floor mat fitted in the driver's footwell may interfere with the throttle pedal and cause the throttle to stick open. This may lead to loss of control of the vehicle.

Fix: Recall affected vehicles and replace mat with modified type.

167 vehicles

The engine may stop while driving and can not be restarted. The strength of the inner part of the spill valve on the fuel injection pump is insufficient and may fail as a result of repeated injection pressure. As a result fuel can not be injected into the combustion chambers.

Fix: Recall the potentially affected vehicles examine the fuel injection pump and where appropriate replace the spill valves with quality assured units.

58 vehicles

The engine may stop while driving and can not be restarted. The strength of the inner part of the spill valve on the fuel injection pump is insufficient and may fail as a result of repeated injection pressure. As a result fuel can not be injected into the combustion chambers.

Fix: Recall the potentially affected vehicles examine the fuel injection pump and where appropriate replace the spill valves with quality assured units.

58 vehicles

There is a possibility that the front suspension coil spring could break. Should this occur the unseated section of the spring could puncture the tyre.

Fix: Affected vehicles are being recalled for the installation of a protector which would prevent a broken coil spring from penetrating the tyre.

8,525 vehicles · built 1 Dec 1991 to 30 Sep 1995

There is a possibility that the front suspension coil spring could break. Should this occur the unseated section of the spring could puncture the tyre.

Fix: Affected vehicles are being recalled for the installation of a protector which would prevent a broken coil spring from penetrating the tyre.

8,525 vehicles · built 1 Dec 1991 to 30 Sep 1995

The clutch system hydraulic hoses on affected vehicles have been manufactured from a material containing mineral oil. As the clutch & brake systems share a common reservoir fluid from the clutch system which has been contaminated by contact with the h

Fix: Recall the affected vehicles for the fitment of new seals to the brake master cylinder. At the same time the brake/clutch hydraulic systems will be purged of the original fluid and replenished. New clutch hoses will also be fitted.

1,754 vehicles · built 1 Jan 1995 to 30 Jul 1996

The engine wiring harness may chafe on the anti-lock braking control valve bracket. As a result the wiring may short leading to failure of the ignition or fuel injection system causing the engine to stop without warning.

Fix: Recall the affected vehicles and install a plastic protector sleeve to the wiring harness in the area of the ABS control valve bracket. Any section of the harness found to be damaged through contact will be repaired prior to sheathing.

1,972 vehicles · built 1 Feb 1992 to 31 Aug 1993

The headlamp wiring harness may chafe against the shroud panel and result in possible short circuit with sudden failure of the headlamps.

Fix: Recall the affected vehicles and shorten the headlamp wiring harness to eliminate possible chafing on the shroud panel. In cases where the harness has been damaged by chafing the damaged section of wiring will be cut out and replaced together with t

12,599 vehicles · built 1 Oct 1991 to 25 May 1993

The headlamp wiring harness may chafe against the shroud panel and result in possible short circuit with sudden failure of the headlamps.

Fix: Recall the affected vehicles and shorten the headlamp wiring harness to eliminate possible chafing on the shroud panel. In cases where the harness has been damaged by chafing the damaged section of wiring will be cut out and replaced together with t

12,599 vehicles · built 1 Oct 1991 to 25 May 1993