Porsche recalls

For affected vehicles there is a possibility that the wiring harness for the front seats has not been installed in accordance with specifications and the harness may be damaged by seat adjustment over the lifetime of the vehicle.

Fix: To prevent this the installation of the affected wiring harness is to be checked and if necessary reworked.

34 vehicles · built 15 Apr 2024 to 3 Dec 2025

On affected vehicles the cabling for the crash sensors in the door trim panel was incorrectly assigned which can delay the side airbag trigger in certain crash situations.

Fix: Re-code the airbag control unit.

1,111 vehicles · built 19 Jul 2022 to 2 Sep 2025

On affected vehicles the screw connection of the high-pressure pump was not implemented in accordance with the technical specifications. This can lead to a leak and the possibility of the fuel igniting.

Fix: Check the screw connections of both high-pressure pumps and replace the high-pressure pumps and fuel lines if necessary.

12 vehicles · built 4 Apr 2023 to 2 Sep 2025

On the affected vehicles it is possible that during the production process the airbags in the front seats were not fastened to the seat backrest in accordance with specifications.If this is the case proper deployment and thus the retention effect of the airbag cannot be ensured in the event of an accident. This can increase the risk of injury to the occupants.

Fix: The screw connection of the airbags in the front seats of the affected vehicles must be checked and reworked depending on the test result.

2 vehicles · built 11 Jun 2024 to 30 Jun 2025

There is a possibility that a locking ring on the air-spring strut at the front left and right was not fitted according to specifications on the affected vehicles. If this is the case the locking ring on the upper side of the respective spring strut can loosen and air can thus escape from the air spring. As a result the driving characteristics may be impaired which increases the risk of an accident.

Fix: The locking ring on the air-spring strut at the front left and right must be checked and reworked depending on the test result

121 vehicles · built 19 Dec 2024 to 22 May 2025

There is a possibility that a locking ring on the air-spring strut at the front left and right was not fitted according to specifications on the affected vehicles. If this is the case the locking ring on the upper side of the respective spring strut can loosen and air can thus escape from the air spring. As a result the driving characteristics may be impaired which increases the risk of an accident.

Fix: The locking ring on the air-spring strut at the front left and right must be checked and reworked depending on the test result

50 vehicles · built 19 Dec 2024 to 22 May 2025

During regular conformity of production tests by the supplier a deviation at a component of the passenger’s airbag unit has been identified. As a result of this deviation the full protective effect of the passenger’s airbag may be impaired in the event of an accident triggering the restraint systems.

Fix: To ensure the full protective effect the passenger’s airbag unit of all affected vehicles must be replaced.

18 vehicles · built 24 Mar 2024 to 7 Apr 2025

Due to a process error in the production an aluminium butyl may have been positioned incorrectly and the screw connection of the rear left and right belt buckle was potentially not executed according to the specifications. If this is the case the correct fastening of the belt buckle cannot be guaranteed. The loosening of the rear belt buckles in the event of an accident or emergency braking cannot be ruled out. This could increase the associated risk of injury.

Fix: The positioning of the aluminium butyl mat on the left and right of the affected vehicles must be checked and depending on the test result the screw connection must be reworked.

184 vehicles · built 16 Feb 2023 to 13 Sep 2023

The software version of the engine control unit does not correspond to the software version that should be on the vehicle.

Fix: Review the software version of the engine control unit and if necessary update it to the correct software version.

19 vehicles · built 11 Mar 2016 to 4 Sep 2017

The software version of the engine control unit does not correspond to the software version that should be on the vehicle.

Fix: Review the software version of the engine control unit and if necessary update it to the correct software version.

23 vehicles · built 30 Nov 2012 to 24 Oct 2017

The software version of the engine control unit does not correspond to the software version that should be on the vehicle.

Fix: Review the software version of the engine control unit and if necessary update it to the correct software version.

20 vehicles · built 14 Oct 2016 to 4 Oct 2017

The software version of the engine control unit does not correspond to the software version that should be on the vehicle.

Fix: Review the software version of the engine control unit and if necessary update it to the correct software version.

100 vehicles · built 23 Aug 2014 to 28 Nov 2017

The software version of the engine control unit does not correspond to the software version that should be on the vehicle.

Fix: Review the software version of the engine control unit and if necessary update it to the correct software version.

29 vehicles · built 30 Nov 2013 to 6 Jul 2018

The software version of the engine control unit does not correspond to the software version that should be on the vehicle.

Fix: Review the software version of the engine control unit and if necessary update it to the correct software version.

Vehicle count not given · built 30 Nov 2013 to 6 Jul 2018

A short circuit within the battery modules during the vehicle’s service life cannot be ruled out under certain circumstances which could lead to thermal events and later to a fire in the vehicle.

Fix: On the affected vehicles the battery modules must be replaced and the on-board diagnostic software (BMCe control unit) will be installed.

7,916 vehicles · built 21 Oct 2019 to 4 Mar 2024

On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.

Fix: Check the correct functioning of the central lock wheel fastening system and replace if necessary.

1,104 vehicles · built 13 Sep 2023 to 23 Oct 2024

On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.

Fix: Check the correct functioning of the central lock wheel fastening system and replace if necessary.

19 vehicles · built 13 Sep 2023 to 23 Oct 2024

On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.

Fix: Check the correct functioning of the central lock wheel fastening system and replace if necessary.

34 vehicles · built 13 Sep 2023 to 23 Oct 2024

On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.

Fix: Check the correct functioning of the central lock wheel fastening system and replace if necessary.

1 vehicles · built 13 Sep 2023 to 23 Oct 2025

On affected vehicles production issues may have occurred at the battery cell / module supplier. A short circuit within the battery modules leading to thermal events and fires cannot be ruled out.

Fix: Replace the affected battery module on the high-volt battery.

288 vehicles · built 7 Nov 2019 to 15 Jun 2023

On affected vehicles there’s a possibility the upper trailing arms on the nearside front axle do not meet required specifications. If this is the case the trailing arm may break.

Fix: Replace the nearside upper trailing arm on the front axle.

650 vehicles · built 9 May 2024 to 19 Jun 2024

On affected vehicles it is possible that the three-point belts of the rear seat belt system were not fitted according to the specifications. If this is the case the restraint function for passengers in the rear left and right seats is not guaranteed in the event of full braking or an accident.

Fix: Check routing of the belt straps of the rear three-point belts and correct routing depending on the check result.

9 vehicles · built 18 Apr 2024 to 26 Jun 2024

On affected vehicles it is possible that the three-point belts of the rear seat belt system were not fitted according to the specifications. If this is the case the restraint function for passengers in the rear left and right seats is not guaranteed in the event of full braking or an accident.

Fix: Check routing of the belt straps of the rear three-point belts and correct routing depending on the check result.

Vehicle count not given · built 18 Apr 2024 to 26 Jun 2024

On affected vehicles brake hoses were installed on the left and right of the front axle that were designed with too small a bending radius. Over time and under certain conditions this can lead to material fatigue and a defect in the brake hose.

Fix: Replace the front axle brake hoses.

21,548 vehicles · built 21 Oct 2019 to 14 Jun 2024

On affected vehicles the transmission shift cable may have had the safety clip on the shift cable incorrectly fitted or the cable sheath on the shift cable may be damaged resulting in the risk of a roll away incident after the vehicle is placed in park (P) if the parking brake is not applied.

Fix: Replace shift cable

3 vehicles · built 23 Jun 2023 to 21 Mar 2024

On affected vehicles the transmission shift cable may have had the safety clip on the shift cable incorrectly fitted or the cable sheath on the shift cable may be damaged resulting in the risk of a roll away incident after the vehicle is placed in park (P) if the parking brake is not applied.

Fix: Replace shift cable

Vehicle count not given · built 23 Jun 2023 to 21 Mar 2024

On affected vehicles production issues may have occurred at the battery cell/battery module supplier. If this is the case a short circuit within the battery modules leading to possible thermal events and fires cannot be ruled out.

Fix: Replace affected battery modules in the high-volt battery.

124 vehicles · built 3 Jul 2018 to 4 Mar 2024

On affected vehicles production issues may have occurred at the battery cell/battery module supplier. If this is the case a short circuit within the battery modules leading to possible thermal events and fires cannot be ruled out.

Fix: Replace affected battery modules in the high-volt battery.

286 vehicles · built 21 Oct 2019 to 17 Jul 2023

There is a possibility that a wheel carrier that does not meet the required specifications was installed on the right front axle of the affected vehicles during repairs at the Porsche Centre due to a temporary production error.

Fix: To prevent any possible danger resulting from this the front right wheel carrier must be replaced.

3 vehicles · built 21 Jul 2009 to 22 Jun 2016

On the affected vehicles it is possible that the front and rear window panes were not manufactured in accordance with specifications and their bonding to the body is therefore insufficient

Fix: To prevent this from happening the front and rear windows on the affected vehicles must be checked and if necessary replaced

2,098 vehicles · built 9 Jul 2020 to 21 Feb 2024

On affected vehicles a short circuit within the high-voltage battery can occur subsequently causing the vehicle to catch fire.

Fix: Replace the high voltage battery

193 vehicles · built 18 Sep 2020 to 22 Jun 2023

On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high.� The high-mounted brake light may become less visible while driving and the aerodynamics of the vehicle may change.

Fix: Re-code the rear vehicle electronics control unit on affected vehicles.�

45 vehicles · built 23 Jun 2023 to 19 Oct 2023

On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high.� The high-mounted brake light may become less visible while driving and the aerodynamics of the vehicle may change.

Fix: Re-code the rear vehicle electronics control unit on affected vehicles.�

45 vehicles · built 23 Jun 2023 to 19 Oct 2023

On affected vehicles the side airbag installed in bucket seats may be activated unnecessarily.

Fix: Recode the airbag control unit

1,048 vehicles · built 15 Mar 2021 to 18 Oct 2023

On affected vehicles due to insufficient sealing under certain circumstances liquid can enter the interior of the high-voltage battery.�

Fix: Check the battery for leaks and replace if necessary.

4,755 vehicles · built 22 Sep 2022 to 28 Aug 2023

On the affected vehicles it is possible that the screw connection of the seat belt mount to the rear left and/or right seat was not carried out in accordance with the specifications.

Fix: The screw connection of the seat belt mount to the rear left and/or right seat must be replaced.

3 vehicles · built 29 Apr 2014 to 13 Feb 2023

On the affected vehicles it is possible that the screw connection of the seat belt mount to the rear left and/or right seat was not carried out in accordance with the specifications.

Fix: The screw connection of the seat belt mount to the rear left and/or right seat must be replaced.

3 vehicles · built 29 Apr 2014 to 13 Feb 2023

On affected vehicles due to a process error in the car body production line it is possible certain welding and other particular connection points were not executed.

Fix: Check the connection points on the body and if necessary remedy to specification.

1 vehicles · built 18 Jun 2019 to 8 Dec 2022

On affected vehicles the front and rear axles trailing arms and wishbones are susceptible to corrosion and do not meet the required specification for durability.

Fix: Replace affected components with new parts.

109 vehicles · built 29 Aug 2003 to 6 May 2006

On affected vehicles there is a possibility of humidity ingress into the control unit for the auxiliary pump of the climate control system. This can cause malfunctions which can lead to short circuits and a risk of smouldering fire. Activation of the AUTO-REST button can lead to fire damage even after the vehicle has been parked.

Fix: Replace the additional pump with a variant with an optimized sealing concept.

1,531 vehicles · built 21 Jul 2015 to 10 Nov 2021

On affected vehicles it is possible both air-spring struts on the front axle were not manufactured correctly.� This can cause the retaining ring on top of the strut to dislodge and release the air in the air spring.�

Fix: Check the struts and replace if necessary.

24 vehicles · built 27 Jul 2021 to 3 Feb 2022

On affected vehicles due to a process error in production the screw connection of the belt end fitting on the driver's and passenger seat may not comply with specifications.

Fix: Check the screw connection for damage and replacing the seat frame if necessary.

10 vehicles · built 10 May 2021 to 31 May 2022

On affected vehicles certain software parameters used in Type Approval were not used in production. There are no indications the deviations affect safety and declared fuel consumption and CO2 emissions values.

Fix: Update software.

4,057 vehicles · built 1 Jan 2014 to 31 Dec 2018

On affected vehicles certain software parameters used in Type Approval were not used in production. There are no indications the deviations affect safety and declared fuel consumption and CO2 emissions values.

Fix: Update software.

4,057 vehicles · built 1 Jan 2014 to 31 Dec 2018

There is a possibility that the fabric protective hose of the wiring harness of the front seats can be damaged when adjusting the seat in the longitudinal direction and subsequently be pulled into the drive spindle of the seat adjustment.

Fix: On affected vehicles check the wiring harness of the front seats rework with textile tape and repair if necessary.

4,334 vehicles · built 17 Oct 2019 to 18 May 2021

There is a possibility that the fabric protective hose of the wiring harness of the front seats can be damaged when adjusting the seat in the longitudinal direction and subsequently be pulled into the drive spindle of the seat adjustment.

Fix: On affected vehicles check the wiring harness of the front seats rework with textile tape and repair if necessary.

4,334 vehicles · built 17 Oct 2019 to 18 May 2021

There is a possibility that the fabric protective hose of the wiring harness of the front seats can be damaged when adjusting the seat in the longitudinal direction and subsequently be pulled into the drive spindle of the seat adjustment.

Fix: On affected vehicles check the wiring harness of the front seats rework with textile tape and repair if necessary.

4,334 vehicles · built 17 Oct 2019 to 18 May 2021

During a data analysis with regard to carrying out recall campaign AMA9 we discovered that the chassis geometry on the rear axle has deviated in some cases.

Fix: The chassis setting on the affected vehicles must be checked and corrected if necessary.

36 vehicles · built 16 Sep 2020 to 21 Oct 2021

Improve the engine control system in terms of nitrogen oxide emissions.

Fix: Engine control software will be updated.

8,111 vehicles · built 3 May 2011 to 3 Sep 2015

Improve the engine control system in terms of nitrogen oxide emissions.

Fix: Engine control software will be updated.

8,111 vehicles · built 3 May 2011 to 3 Sep 2015

The fitted tyres may adversely affect vehicle emission outputs.

Fix: Check whether the Pirelli PZero N0 tyres fitted ex-works are still on affected 981 Spyder vehicles and replace them with the successor model Pirelli PZero N1.

22 vehicles · built 5 May 2015 to 16 Dec 2015

The fitted tyres may adversely affect vehicle emission outputs.

Fix: Check whether the Pirelli PZero N0 tyres fitted ex-works are still on affected 981 Spyder vehicles and replace them with the successor model Pirelli PZero N1.

22 vehicles · built 5 May 2015 to 16 Dec 2015

There is a possibility that the screw connection on upper control arms of the rear axle were not installed according to specification.

Fix: The screw connection must be replaced and installed according to the specification. In addition the chassis components must be checked for associated damage and replaced in the event of visible damage.

15 vehicles · built 17 Jun 2020 to 16 Nov 2020

The screw connection of the pressure input rod of the brake booster may not have been tightened according to regulations.

Fix: The brake booster must be replaced or reworked depending on the vehicle type.�

4 vehicles · built 7 Nov 2018 to 29 Apr 2021

The carrier side parts installed on the rear axle during a certain period may not meet the required specifications.

Fix: The left and right carrier side parts of the affected vehicles must be replaced.

1,854 vehicles · built 1 Sep 2012 to 1 Feb 2013

The carrier side parts installed on the rear axle during a certain period may not meet the required specifications.

Fix: The left and right carrier side parts of the affected vehicles must be replaced.

1,854 vehicles · built 1 Jan 2014 to 1 Jul 2014

It is possible for the affected vehicles to display the warning message Drive control disturbed - Park vehicle safely in the instrument cluster.

Fix: The high-voltage power electronics must be reprogrammed with corrected software.

4,495 vehicles · built 10 Jul 2019 to 25 Jun 2021

It is possible for the affected vehicles to display the warning message Drive control disturbed - Park vehicle safely in the instrument cluster.

Fix: The high-voltage power electronics must be reprogrammed with corrected software.

4,495 vehicles · built 10 Jul 2019 to 25 Jun 2021

The screws securing the steering column to the steering gear may not meet� the required specifications on�affected vehicles.�

Fix: The steering column screws must be replaced.�

5 vehicles · built 13 Oct 2017 to 10 Apr 2021

There is a possibility that the right front lower trailing arms do not meet the required specifications.

Fix: The lower trailing arm on the right front axle must be replaced on the affected vehicles.

84 vehicles · built 1 Feb 2021 to 5 May 2021

There is a possibility that the right front lower trailing arms do not meet the required specifications.

Fix: The lower trailing arm on the right front axle must be replaced on the affected vehicles.

84 vehicles · built 1 Feb 2021 to 5 May 2021

There is a possibility that a crack formation could occur on the engine cylinder bores.

Fix: The engine on the affected vehicles will be replaced.

2 vehicles · built 28 Sep 2020 to 7 Dec 2020

A possibility that lock nuts were installed on the rear axle trailing arms that were not manufactured according to the required parameter field.

Fix: The lock nuts on the axle trailing arms of the rear axle must be replaced with nuts manufactured in accordance with the specifications.

50 vehicles · built 16 Sep 2020 to 31 Oct 2020

Individual screw connections of the shock absorbers on the front axle and rear axle may have been impermissibly tightened several times.

Fix: The affected fastening screws must be replaced and tightened according to the original specifications. On vehicles where the front axle is affected the mounting saddles must also be replaced.

4 vehicles · built 7 Jan 2021 to 25 Feb 2021

Individual threaded connections at the vehicle's suspension might not be tightened to the specification due to insufficiently cut thread of locknuts.

Fix: The affected screw joints must be replaced with a new nut and bolt and tightened to the original specification.

166 vehicles · built 14 Oct 2020 to 19 Jan 2021

Individual threaded connections at the vehicle's suspension might not be tightened to the specification due to insufficiently cut thread of locknuts.

Fix: The affected screw joints must be replaced with a new nut and bolt and tightened to the original specification.

166 vehicles · built 14 Oct 2020 to 19 Jan 2021

Connecting rods that were not manufactured according to specifications may have been installed in the engines of the affected vehicles.

Fix: The engine must be replaced.

74 vehicles · built 19 Jan 2021 to 3 Apr 2021

Connecting rods that were not manufactured according to specifications may have been installed in the engines of the affected vehicles.

Fix: The engine must be replaced.

74 vehicles · built 19 Jan 2021 to 3 Apr 2021

Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.

Fix: The chassis bolts will be replaced and tightened with the specified tightening torque.

2 vehicles · built 20 Aug 2019 to 17 Jan 2020

Individual threaded connections at the vehicle's suspension might not be tightened to the specification due to insufficiently cut thread of locknuts.

Fix: The affected screw joints must be replaced with a new nut and bolt and tightened to the original specification.

166 vehicles · built 14 Oct 2020 to 19 Jan 2021

Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.

Fix: The chassis bolts will be replaced and tightened with the specified tightening torque.

2 vehicles · built 20 Aug 2019 to 17 Jan 2020

Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.

Fix: The chassis bolts will be replaced and tightened with the specified tightening torque.

2 vehicles · built 20 Aug 2019 to 17 Jan 2020

Connecting rods that were not manufactured according to specifications may have been installed in the engines of the affected vehicles.

Fix: The engine must be replaced.

74 vehicles · built 19 Jan 2021 to 3 Apr 2021

The passenger seat occupancy detection system does not currently meet the required standard.

Fix: The passenger seat occupancy detection sensor mats must be replaced.

1 vehicles · built 5 Mar 2014 to 4 Aug 2017

The affected vehicle may not meet prescribed emission limits.

Fix: The engine and transmission control units must be updated

1,424 vehicles · built 22 May 2015 to 15 Dec 2017

The front four-wheel final drive transmission support mounts may not be tightened according to specifications.

Fix: The front-axle final drive will be removed and the transmission support will be secured according to specifications. If necessary the front-axle final drive and any other damaged components will be replaced.

30 vehicles · built 11 Dec 2018 to 8 Nov 2019

The tightness of the quick connector of the fuel supply line may not be ensured.

Fix: The fuel supply line in the engine compartment has to be replaced.

536 vehicles · built 29 Nov 2017 to 5 Dec 2019

The tightness of the quick connector of the fuel supply line may not be ensured.

Fix: The fuel supply line in the engine compartment has to be replaced.

536 vehicles · built 29 Nov 2017 to 5 Dec 2019

The tightness of the quick connector of the fuel supply line may not be ensured.

Fix: The fuel supply line in the engine compartment has to be replaced.

536 vehicles · built 29 Nov 2017 to 5 Dec 2019

The tightness of the quick connector of the fuel supply line may not be ensured.

Fix: The fuel supply line in the engine compartment has to be replaced.

536 vehicles · built 29 Nov 2017 to 5 Dec 2019

The affected vehicle may not meet prescribed emission limits.

Fix: The engine control unit must be updated in order to improve the engine control system.

1,456 vehicles · built 16 Aug 2012 to 24 Nov 2017

The fuel pump connection pipe may come into contact with the fuel pump service cover and become damaged

Fix: Re-work the bottom of the service cover

7,374 vehicles · built 7 Nov 2013 to 27 Mar 2018

Cylinder bank 2 high-pressure fuel line might not be tight

Fix: Replace the high-pressure fuel line and sensor on cylinder bank 2.

157 vehicles · built 17 Jul 2019 to 15 Jan 2020

Cylinder bank 2 high-pressure fuel line might not be tight

Fix: Replace the high-pressure fuel line and sensor on cylinder bank 2.

157 vehicles · built 17 Jul 2019 to 15 Jan 2020

Cylinder bank 2 high-pressure fuel line might not be tight

Fix: Replace the high-pressure fuel line and sensor on cylinder bank 2.

157 vehicles · built 17 Jul 2019 to 15 Jan 2020

There is a possibility that the hazard warning lights will not be activated after pressing the button in the center console.

Fix: Re-program the operator control unit in front center console.

581 vehicles · built 26 Feb 2019 to 5 Dec 2019

Emission values may be higher than expected.

Fix: Replace the suction hoses and re-programme vehicle control units.

221 vehicles · built 8 Oct 2016 to 7 Nov 2017

The required display logic of the brake wear indicator is incorrect.

Fix: The instrument cluster must be re-programmed with updated software.

6,250 vehicles · built 13 Apr 2016 to 30 Aug 2019

The required display logic of the brake wear indicator is incorrect.

Fix: The instrument cluster must be re-programmed with updated software.

6,250 vehicles · built 30 Aug 2017 to 2 Aug 2019

Possible fault within the air bag control unit.

Fix: Software upgrade to the control unit and replacement if faulty.

1,810 vehicles · built 23 Jun 2015 to 16 Jun 2016

Possible fault within the air bag control unit.

Fix: Software upgrade to the control unit and replacement if faulty.

1,810 vehicles · built 23 Jun 2015 to 16 Jun 2016

Possible fault within the air bag control unit.

Fix: Software upgrade to the control unit and replacement if faulty.

1,810 vehicles · built 23 Jun 2015 to 16 Jun 2016

Possible fault within the air bag control unit.

Fix: Software upgrade to the control unit and replacement if faulty.

1,810 vehicles · built 23 Jun 2015 to 16 Jun 2016

Possible fault within the air bag control unit.

Fix: Software upgrade to the control unit and replacement if faulty.

1,810 vehicles · built 23 Jun 2015 to 16 Jun 2016

Possible fault within the air bag control unit.

Fix: Software upgrade to the control unit and replacement if faulty.

1,810 vehicles · built 23 Jun 2015 to 16 Jun 2016

Possible missing cover in the door sub-frame.

Fix: Inspect retrofit cover if required.

1 vehicles · built 12 Jan 2018 to 17 Jun 2019

Possible missing cover in the door sub-frame.

Fix: Inspect retrofit cover if required.

1 vehicles · built 12 Jan 2018 to 17 Jun 2019

Possible missing cover in the door sub-frame.

Fix: Inspect retrofit cover if required.

1 vehicles · built 12 Jan 2018 to 17 Jun 2019

The transmission selector lever plastic sleeve does not have the required durability.

Fix: Replace the plastic sleeve on the selector cable.

11,745 vehicles · built 23 Jul 2002 to 5 Feb 2010

The transmission selector lever plastic sleeve does not have the required durability.

Fix: Replace the plastic sleeve on the selector cable.

11,745 vehicles · built 20 Aug 2008 to 13 Sep 2016

Incorrectly coated nuts were used to secure the drive shaft and wheel hub on the rear axle.

Fix: Replace the fastening nuts and torque to specification.

5 vehicles · built 21 Jan 2019 to 25 Mar 2019

The electric power steering harness could become trapped and damaged.

Fix: Check and replace the electric power steering harness if necessary.

270 vehicles · built 9 Nov 2017 to 6 Mar 2019

Possible short circuits in the heater blower control unit.

Fix: Inspect and where necessary replace the control unit.

4,506 vehicles · built 12 Jul 2009 to 13 Sep 2016

Inadequate connection between the lower longitudinal member and cross member.

Fix: Secure the lower longitudinal member to the cross member using additional blind rivets.

1 vehicles · built 23 Feb 2016 to 14 Feb 2019

There is a possibility that the side airbag sensors are not tightened to specification.

Fix: Check both side airbag sensors and rework the fixing where necessary.

211 vehicles · built 22 Nov 2017 to 25 Apr 2018

There is a possibility that the side airbag sensors are not tightened to specification.

Fix: Check both side airbag sensors and rework the fixing where necessary.

211 vehicles · built 22 Nov 2017 to 25 Apr 2018

There is a possibility that the side airbag sensors are not tightened to specification.

Fix: Check both side airbag sensors and rework the fixing where necessary.

211 vehicles · built 22 Nov 2017 to 25 Apr 2018

Brake pad wear warning light function is incorrect.

Fix: Update software of instrument cluster.

1,305 vehicles · built 30 Sep 2017 to 7 Jun 2018

Brake pad wear warning light function is incorrect.

Fix: Update software of instrument cluster.

2,511 vehicles · built 21 Mar 2016 to 15 Nov 2018

Fuel may enter the carbon canister whilst refuelling.

Fix: Replace fuel filler tube and carbon canister.

294 vehicles · built 12 Mar 2018 to 31 Oct 2018

Electric power steering may be unavailable.

Fix: Re-programme power steering control unit with software upgrade.

2,521 vehicles · built 21 Mar 2016 to 6 Dec 2018

The connecting links on the rear axle anti roll bar cannot be ensured over the life of the vehicle. This may lead to noise and an activated yellow warning light. This may impair the function which is characterised by greater understeer and increased roll behaviour.

Fix: Replacement of the links on the anti roll bar.

197 vehicles · built 8 Dec 2016 to 5 Jun 2018

Internal tests have shown that the longitudinal and transverse control arms installed on the affected vehicles may be prone to corrosion. The durability of these components cannot therefore be unequivocally guaranteed. f the fastening bolts on the longitudinal and transverse control arms crack due to corrosion vehicle handling in extreme situations e.g. during race track driving may be restricted and this can increase the risk of an accident.

Fix: The affected components on the vehicles will therefore be replaced by components made of more robust material.

78 vehicles · built 9 Jul 2013 to 27 Jul 2015

On affected vehicles there is the possibility the electric plug connection of the accelerator pedal module is not secured correctly due to an assembly error. The assembly error could potentially lead to a loosening of the contact of the electric plug connection of the accelerator pedal and as a result throttle response may no longer be available. If this happens while driving the vehicle will decelerate to a walking pace and it can only be moved with the engine power available at idle speed.

Fix: To prevent this from occuring correct locking of the electric plug connection of the accelerator pedal has to be checked and confirmed by a Porsche dealership.

4 vehicles · built 27 Feb 2018 to 22 Mar 2018

Necessary technical acceptance not carried out by Porsche AG prior to sale of certain Porsche company cars. As a result one pre-owned vehicle does not comply to the latest standards and related quality standards.

Fix: The one car affected will be bought back by Porsche AG through their Porsche centre network.

1 vehicles · built 23 Apr 2013 to 21 Oct 2014

There is a possibility the clamp between the particle filter and the front exhaust pipe is not closed fully due to an unfavourable tolerance pairing.The particle filter could become detached from the exhaust pipe when travelling over bumps for example. This can then cause exhaust gas to leak out and rattling noises. If this happens the customer will notice an exhaust smell and the pre-mentioned noise.

Fix: Affected vehicles will be recalled so the clamp can be checked. Where necessary relevant components will be replaced.

109 vehicles · built 15 Aug 2016 to 9 Mar 2017

Incorrect passenger air bag detonators were installed during manufacturer. this may adversely affect the airbag's deployment in the event of an impact.

Fix: On affected vehicles replace the passenger's air bag module.

15 vehicles · built 26 Sep 2016 to 13 Jan 2017

Incorrect passenger air bag detonators were installed during manufacturer. this may adversely affect the airbag's deployment in the event of an impact.

Fix: On affected vehicles replace the passenger's air bag module.

15 vehicles · built 26 Sep 2016 to 13 Jan 2017

The seat occupancy detector system may not be to the correct standard and the passenger's airbags may be deactivated

Fix: On affected vehicle replace the sensor mat.

2 vehicles · built 4 Mar 2014 to 20 Oct 2015

On 911 Cabriolet and Targa models only the windscreen may have been fitted with insufficient bonding product. There is a possibility that the windscreen could detach from the vehicle in the event of an accident.

Fix: Recall the likely affected vehicles and rebond the windscreen.

149 vehicles · built 10 Jan 2017 to 10 Feb 2017

On 911 Cabriolet and Targa models only the windscreen may have been fitted with insufficient bonding product. There is a possibility that the windscreen could detach from the vehicle in the event of an accident.

Fix: Recall the likely affected vehicles and rebond the windscreen.

149 vehicles · built 10 Jan 2017 to 10 Feb 2017

The screws retaining the fuel collection pipe(s) may shear under stress. This may allow the pipe(s) to separate from the injector(s) and cause fuel to leak.

Fix: On affected vehicle replace the collection pipes' securing screws

1,091 vehicles · built 7 Oct 2015 to 26 Sep 2016

The screws retaining the fuel collection pipe(s) may shear under stress. This may allow the pipe(s) to separate from the injector(s) and cause fuel to leak.

Fix: On affected vehicle replace the collection pipes' securing screws

1,091 vehicles · built 7 Oct 2015 to 26 Sep 2016

The high fuel pressure that builds up in the injection system when the engine is running can cause cracking and ultimately press the relevant fuel collection pipe off the injectors. This can cause a fuel leak in the engine compartment.

Fix: Recall the vehicles that are likely to be affected and replace the fastening screws for the fuel collection pipes with different screws.

1,083 vehicles · built 7 Oct 2015 to 26 Sep 2016

The high fuel pressure that builds up in the injection system when the engine is running can cause cracking and ultimately press the relevant fuel collection pipe off the injectors. This can cause a fuel leak in the engine compartment.

Fix: Recall the vehicles that are likely to be affected and replace the fastening screws for the fuel collection pipes with different screws.

1,083 vehicles · built 7 Oct 2015 to 26 Sep 2016

It has been identified that the front side airbags may have been fitted with the incorrect detonators. If the vehicle is involved in a collision then the airbags may not operate as intended.

Fix: Recall all affected vehicles to replace the front side airbags with a quality assured replacement.

11 vehicles · built 28 Sep 2015 to 29 Sep 2016

It has been identified that the front side airbags may have been fitted with the incorrect detonators. If the vehicle is involved in a collision then the airbags may not operate as intended.

Fix: Recall all affected vehicles to replace the front side airbags with a quality assured replacement.

11 vehicles · built 28 Sep 2016 to 29 Sep 2016

It has been identified that the durability of the lower trailing arm cannot be guaranteed. The arm can start to crack or fracture which if used on race track use or similar events can cause the arm to fail and result in loss of control of the vehicle.

Fix: Recall all the affected vehicles to replace the lower trailing arms with a more durable component.

76 vehicles · built 6 Nov 2013 to 27 Jul 2015

A vacuum supply line for the brake booster may not have been fitted correctly. The vacuum supply line could become loose resulting in reduced braking assistance. The brakes will still work but the driver will have to supply additional input for the required brake effort.

Fix: Recall the vehicles that are likely to be affected where the connection points of the vacuum supply line will be checked/adjusted/replaced as necessary.

28 vehicles · built 7 Sep 2016 to 28 Sep 2016

A vacuum supply line for the brake booster may not have been fitted correctly. The vacuum supply line could become loose resulting in reduced braking assistance. The brakes will still work but the driver will have to supply additional input for the required brake effort.

Fix: Recall the vehicles that are likely to be affected where the connection points of the vacuum supply line will be checked/adjusted/replaced as necessary.

28 vehicles · built 7 Sep 2016 to 28 Sep 2016

A vacuum supply line for the brake booster may not have been fitted correctly. The vacuum supply line could become loose resulting in reduced braking assistance. The brakes will still work but the driver will have to supply additional input for the required brake effort.

Fix: Recall the vehicles that are likely to be affected where the connection points of the vacuum supply line will be checked/adjusted/replaced as necessary.

28 vehicles · built 7 Sep 2016 to 28 Sep 2016

A vacuum supply line for the brake booster may not have been fitted correctly. The vacuum supply line could become loose resulting in reduced braking assistance. The brakes will still work but the driver will have to supply additional input for the required brake effort.

Fix: Recall the vehicles that are likely to be affected where the connection points of the vacuum supply line will be checked/adjusted/replaced as necessary.

28 vehicles · built 7 Sep 2016 to 28 Sep 2016

A vacuum supply line for the brake booster may not have been fitted correctly. The vacuum supply line could become loose resulting in reduced braking assistance. The brakes will still work but the driver will have to supply additional input for the required brake effort.

Fix: Recall the vehicles that are likely to be affected where the connection points of the vacuum supply line will be checked/adjusted/replaced as necessary.

28 vehicles · built 7 Sep 2016 to 28 Sep 2016

On affected vehicles the incorrect type of bolt may have been supplied during repair work involving the removal of the seat belt mount or belt reel.

Fix: Check type of bolt fitted and replace where necessary.

76 vehicles · built 25 Feb 2014 to 27 Jul 2015

The circlip on the bearing bracket for the pedals may detach. If this occurs the brake pedal will become unsecured axially and come out of one of the two bearings leading to decreased brake functionality.

Fix: Recall the vehicles that are likely to be affected and check the fitment of the circlip and replaced as necessary.

13,680 vehicles · built 15 Jan 2011 to 11 Jan 2016

Fuel may leak from the low pressure fuel line connector. A very small number of reports where the occupants noticed a smell of fuel have prompted the recall. There is a theoretical/perceived risk of fire.

Fix: Recall the vehicles that are likely to be affected and replace the low pressure fuel line.

1,198 vehicles · built 24 Jan 2014 to 26 Oct 2015

The wiring harness for the left hand radiator could be touching a heat guide plate made of carbon fibre. Therefore the harness could be damaged causing the radiator fan to stop working and an electric short circuit to the low resistance heat guide plate cannot be ruled out. This electric short circuit can cause the vehicle to catch fire even a long time after stopping the vehicle.

Fix: Recall the vehicles that are likely to be affected and check the routing of the wiring harness and the harness condition. The harness must be secured to the water tube using an additional tie wrap clamp. If the wire harness is damaged it must also be repaired.

48 vehicles · built 25 Feb 2015 to 6 May 2015

Fuel may leak from the injector fuel rails. Occupants may notice a smell and though small there is a risk of fire.

Fix: Replace injector fuel rails

112 vehicles · built 17 Mar 2011 to 7 May 2012

Fuel may leak from the injector fuel rails. Occupants may notice a smell and though small there is a risk of fire.

Fix: Replace injector fuel rails

112 vehicles · built 17 Mar 2011 to 7 May 2012

The front axle has been fitted with chassis components whose durability cannot be guaranteed. The lower control arms can start to crack and eventually break which will result in the vehicle handling being impaired.

Fix: Recall the vehicles that are likely to be affected and replace the lower control arms.

6 vehicles · built 25 Feb 2014 to 22 Sep 2014

On affected vehicles the upper part of the catch mechanism fitted to the front luggage compartment lid may not be secured to the correct specification. The mechanism may become detached from the lid allowing it to open unintentionally.

Fix: Replace upper part of catch mechanism and secure with new screws

378 vehicles · built 5 May 2014 to 6 Jun 2014

On affected vehicles the upper part of the catch mechanism fitted to the front luggage compartment lid may not be secured to the correct specification. The mechanism may become detached from the lid allowing it to open unintentionally.

Fix: Replace upper part of catch mechanism and secure with new screws

378 vehicles · built 5 May 2014 to 6 Jun 2014

On affected vehicles the upper part of the catch mechanism fitted to the front luggage compartment lid may not be secured to the correct specification. The mechanism may become detached from the lid allowing it to open unintentionally.

Fix: Replace upper part of catch mechanism and secure with new screws

378 vehicles · built 5 May 2014 to 6 Jun 2014

The brake servo may have been damaged during installation which would result in reduced pedal assistance whilst the brakes will still function more pedal force will be required to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to check the servo and where necessary replace the servo.

196 vehicles · built 27 Jan 2014 to 10 Apr 2014

One or more engine con rod bolts may fail and lead to the crankcase being damaged and in the worst case fire.

Fix: Recall the vehicles that are likely to be affected to replace the engine and vehicle specific identification stickers.

168 vehicles

The low fuel pressure sensor may not be fully tight. Over the life of the car the sensor may loosen allowing fuel to leak in the engine compartment.

Fix: Recall the vehicles that are likely to be affected to tighten the low fuel pressure sensor to the correct torque.

19 vehicles

Internal tests have shown that rear mufflers (silencer) installed on these vehicles do not achieve the required service life. As a result the exhaust tailpipe of the rear muffler can crack on vehicles with higher mileage this can result in the loss of the exhaust tailpipe and represents a danger to other road users

Fix: Replace both rear mufflers.

280 vehicles

Internal tests have shown that rear mufflers (silencer) installed on these vehicles do not achieve the required service life. As a result the exhaust tailpipe of the rear muffler can crack on vehicles with higher mileage this can result in the loss of the exhaust tailpipe and represents a danger to other road users

Fix: Replace both rear mufflers.

280 vehicles

Current market observations have shown that the track usage of many vehicles in the 911 model line now comes close to that of pure GT3 racing vehicles. The component stresses associated with race track use and competitive driving are much higher than for a sporty driving style on public roads. The revision intervals for race track use must be observed particularly for highly stressed chassis components in the same way as is required for GT3 racing vehicles. If these revision intervals are not observed the failure of highly stressed components and breakage of hubs on the rear axle for example cannot be ruled out particularly in the case of components in advanced stages of wear.

Fix: In order to standardise revision intervals the wheel hubs on the rear axle will be replaced by standard wheel hubs on the affected vehicles with central wheel lock

76 vehicles

The turbo chargers fitted to the affected vehicles may not be manufactured to the required standard. The result of one or both of the turbo chargers failing is rough running and lack of power. In the worst case scenario there is a possibility that fire could occur.

Fix: Recall the vehicles that are likely to be affected to replace the turbo chargers.

54 vehicles

The turbo chargers fitted to the affected vehicles may not be manufactured to the required standard. The result of one or both of the turbo chargers failing is rough running and lack of power. In the worst case scenario there is a possibility that fire could occur.

Fix: Recall the vehicles that are likely to be affected to replace the turbo chargers.

54 vehicles

A fuel pipe quick connector located under the vehicle could be contacting a heating pipe. The contact of the pipe and connector could impair the locking function of the connector and in the worst case could cause the fuel pipe to leak and the possibility of the engine cutting out or fire.

Fix: Recall the vehicles that are likely to be affected to check for contact of the heating pipe and fuel line and if there is sufficient clearance fit a spacing ring and if there has been contact fit a new fuel line and spacer.

367 vehicles

A fuel pipe quick connector located under the vehicle could be contacting a heating pipe. The contact of the pipe and connector could impair the locking function of the connector and in the worst case could cause the fuel pipe to leak and the possibility of the engine cutting out or fire.

Fix: Recall the vehicles that are likely to be affected to check for contact of the heating pipe and fuel line and if there is sufficient clearance fit a spacing ring and if there has been contact fit a new fuel line and spacer.

367 vehicles

If a headlight module is not locked correctly relative movements with respect to the wing can occur. In rare cases this can cause the headlight to become detached from the wing. Based on results from internal quality control checks and individual complaints Porsche has decided to incorporate measures to make the locking system more robust into standard production and they will retrofit these changes on existing models.

Fix: Affected vehicles will be recalled to have the locking mechanism on both headlights replaced.

3,154 vehicles

At a recent 24 hour race at the Nurburgring Circuit it was identified that the clamping force/torque on the centre wheel locking components is incorrect. If the vehicle is used under racing type conditions it is possible that the centre locking device could undo which if not identified could lead to a wheel detachment.

Fix: Recall all the affected vehicles to check the centre locking components and replace them if required.

430 vehicles

It is possible that the position of the front seat could affect the security front seat belt mounting. In the worst case the seat belt may become detached from the seat during a collision.

Fix: Recall the vehicles that are likely to be affected to fit an additional locking element to the affected seat belt mountings.

348 vehicles

It is possible that the locking hook on the sunshield may not engage correctly into the lock catch on the windscreen frame. If this occurs then the shield can open when the vehicle is travelling at high speeds.

Fix: Recall the affected vehicles for the shield catch to be replaced.

82 vehicles

Due to vibration it is possible that stress cracks make occur on the engine spacer. This will normally result in noises however it is possible on high milage vehicles for the spacers to become detached.

Fix: Fitment of additional damping elements to reduce the vibration and overcome the issue.

217 vehicles

Due to vibration it is possible that stress cracks make occur on the engine spacer. This will normally result in noises however it is possible on high milage vehicles for the spacers to become detached.

Fix: Fitment of additional damping elements to reduce the vibration and overcome the issue.

217 vehicles

It has been identified that it is possible that the threaded joints on the chassis of subject vehicles may not have been tightened to the prescribed torque. This may result in the screws becoming loose resulting in noises from around the vehicle. Should the screws detach steering control can become impaired.

Fix: Recalled vehicles will have the subject joints checked to ensure that they are tightened to the correct torque.

16 vehicles

It has been identified that it is possible that the threaded joints on the chassis of subject vehicles may not have been tightened to the prescribed torque. This may result in the screws becoming loose resulting in noises from around the vehicle. Should the screws detach steering control can become impaired.

Fix: Recalled vehicles will have the subject joints checked to ensure that they are tightened to the correct torque.

16 vehicles

It has been identified that it is possible that the threaded joints on the chassis of subject vehicles may not have been tightened to the prescribed torque. This may result in the screws becoming loose resulting in noises from around the vehicle. Should the screws detach steering control can become impaired.

Fix: Recalled vehicles will have the subject joints checked to ensure that they are tightened to the correct torque.

16 vehicles

It has been identified that it is possible that the threaded joints on the chassis of subject vehicles may not have been tightened to the prescribed torque. This may result in the screws becoming loose resulting in noises from around the vehicle. Should the screws detach steering control can become impaired.

Fix: Recalled vehicles will have the subject joints checked to ensure that they are tightened to the correct torque.

16 vehicles

It has been identified that the possibility exists that a fuel line within the scuttle panel area may be in contact with the engine compartment cover. This can result in a knocking noise and the fuel line becoming damaged with the attendant possibility that a fuel leak may occur.

Fix: Recalled vehicles will have the routing of the fuel line changed and an additional spacer fitted. In the event of damage to the fuel line it will be replaced.

982 vehicles

The switch console for the PASM (Porsche Active Suspension Management) and TC Off (Traction Control) may be defective and give incorrect signals or cause the above systems to fail.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the switch console.

40 vehicles

It has been identified that the possibility exists that a faulty seat belt buckle has been installed as part of the six- point seat belt harness. If a faulty buckle has been installed it may not be possible open the buckle following an accident if the belt straps have been subject to a tensile load thus requiring the seat belt straps to be cut before the occupant could leave the vehicle.

Fix: Subject vehicles will have the seat belt buckle checked for the production date and replaced as necessary.

48 vehicles

A bearing flange on the parking brake lever is likely to break. If this occurs the parking brake will be ineffective.

Fix: Recall the vehicles that are likely to be affected and replace the parking brake lever assembly.

111 vehicles · built 22 Nov 2005 to 13 Dec 2005

A bearing flange on the parking brake lever is likely to break. If this occurs the parking brake will be ineffective.

Fix: Recall the vehicles that are likely to be affected and replace the parking brake lever assembly.

111 vehicles · built 22 Nov 2005 to 13 Dec 2005

A bearing flange on the parking brake lever is likely to break. If this occurs the parking brake will be ineffective.

Fix: Recall the vehicles that are likely to be affected and replace the parking brake lever assembly.

111 vehicles · built 22 Nov 2005 to 13 Dec 2005

The welded seams on the exhaust tailpipe may fail. This can cause rattling noises while driving and can result in the loss of the exhaust tailpipe if the driver continues to drive the vehicle.

Fix: Recall the vehicles that are likely to be affected and replace the exhaust tailpipes with modified units.

2,566 vehicles

There is a possibility that when the convertible top is closed the convertible top is not completely locked even though the warning lamp is extinguished. This could lead to the roof opening whilst the vehicle is in motion.

Fix: Recall the vehicles that are likely to be affected and fit modified locking-mechanism motors. In addittion check that the correct locating pegs are installed and that the convertible top is set correctly.

806 vehicles · built 1 Feb 1994 to 1 Feb 1998

There is a possibility that when the convertible top is closed the convertible top is not completely locked even though the warning lamp is extinguished. This could lead to the roof opening whilst the vehicle is in motion.

Fix: Recall the vehicles that are likely to be affected and fit modified locking-mechanism motors. In addittion check that the correct locating pegs are installed and that the convertible top is set correctly.

806 vehicles · built 1 Feb 1994 to 1 Feb 1998

Front seats are fitted with seat backs that do not meet the rigidity Porsche AG demands.

Fix: Recall affected vehicles and replace the front seats with those which meet all the appropriate requirements.

519 vehicles

Inadequate crash resistance for left hand front seat frame

Fix: Recall likely to be affected vehicles and fit a replacement seat

14 vehicles · built 1 Mar 2003 to 1 Mar 2003

Possibility that the spring of the foot operated handbrake may rub on the main wiring harness and damage it

Fix: Recall affected vehicles and fit a cover to protect the harness.

842 vehicles · built 1 Mar 2003 to 1 Mar 2003

There is a possibility that the ground connection between the thread of the tank filler neck and the connecting pipe to the fuel tank may not be sound which may result in an electrostatic charge which in rare cases could create a spark which could ignite fuel vapours in the area outside of the tank filler neck which could lead to a muffled detonation..

Fix: Recall affected vehicles inspect and if necessary rework ground connection.

1 vehicles · built 1 Mar 2003 to 1 Mar 2003

A connector bolt may be loose which could cause a steering fluid leak and loss of power assistance to the steering and and on the 911 Turbo to the power assistance to the clutch. Leaking fluid may ignite if it comes into contact with the exhaust system.

Fix: Vehicles must be recalled and the connector bolts must be tightened with the correct torque.

303 vehicles

The cover sleeve on the exhaust tail pipe may have been attached by two instead of four spot welds. There is therefore a possibility that the cover sleeve could detach from the tail pipe whilst driving.

Fix: The affected vehicles will be recalled to Porsche dealers for inspection. Any tail pipes where the cover sleeves are attached by two welds will be replaced with four weld version pipes.

18 vehicles · built 1 Jan 1996 to 31 Dec 1996

Crack like surface defects may be present on the mould parting line on the rear axle side parts.

Fix: Recall the affected vehicles and inspect the rear axle side parts for surface defects where these are present the original side part(s) will be replaced with quality assured parts.

11 vehicles · built 1 Jan 1994 to 31 Dec 1994

Under extreme circumstances rear wheel lock up could occur during heavy braking. This is due to the fitment of an incorrect brake modulator valve.

Fix: Recall the affected vehicles and replace the original brake modulator valve with a modified example.

258 vehicles · built 1 Jan 1991 to 31 Dec 1992

The rear heater blower resistor can become electrically overloaded due to binding or seizure of the heater blower. The overloaded resistor may become hot enough to ignite the plastic air pipe in which it is located.

Fix: Recall the affected vehicles for the installation of a modified resistor unit which incorporates a thermal link.

2,709 vehicles · built 1 Jan 1989 to 31 Dec 1992

The front latch hooks securing the convertible top to the windscreen frame may fracture and in the worst case allow the convertible top to retract without warning whilst the vehicle is being driven.

Fix: Recall the affected vehicles for replacement of the original latch hooks with modified versions.

2 vehicles · built 1 Mar 1993 to 31 Mar 1993

There is a possibility that a ball socket on the cruise control may detach. This could allow the linkage to jam on adjacent components and prevent the accelerator linkage returning to the idle position when the pedal is released.

Fix: Recall the affected vehicles for replacement of the original cruise control ball sockets with quality assured steel examples.

192 vehicles · built 1 Jan 1989 to 31 Dec 1992