Land Rover recalls

For affected vehicles the repair procedure for a prior safety recall was incorrect. As a result the front suspension knuckles have been replaced with those of an incorrect specification.

Fix: Vehicles will have both front suspension knuckles replaced.

4 vehicles · built 24 Nov 2015 to 18 Jul 2017

A concern has been identified on certain AJ20-D6 engines where the Front End Auxiliary Drive (FEAD) belt idler pulley may over-rotate following a high torsion input and lead to a clash with and damage to the oil pressure and temperature sensor. A damaged oil pressure and temperature sensor can lead to an oil leak from the engine which can result in a slip hazard for following road users particularly two-wheeled vehicles.

Fix: Vehicles will have the Front-End Auxiliary Drive (FEAD) idler pulley replaced.

36,808 vehicles · built 3 Jun 2024 to 18 Apr 2026

A concern has been identified on certain AJ20-D6 engines where the Front End Auxiliary Drive (FEAD) belt idler pulley may over-rotate following a high torsion input and lead to a clash with and damage to the oil pressure and temperature sensor. A damaged oil pressure and temperature sensor can lead to an oil leak from the engine which can result in a slip hazard for following road users particularly two-wheeled vehicles.

Fix: Vehicles will have the Front-End Auxiliary Drive (FEAD) idler pulley replaced.

11,526 vehicles · built 3 Jul 2024 to 17 Apr 2026

A concern has been identified on certain AJ20-D6 engines where the Front End Auxiliary Drive (FEAD) belt idler pulley may over-rotate following a high torsion input and lead to a clash with and damage to the oil pressure and temperature sensor. A damaged oil pressure and temperature sensor can lead to an oil leak from the engine which can result in a slip hazard for following road users particularly two-wheeled vehicles.

Fix: Vehicles will have the Front-End Auxiliary Drive (FEAD) idler pulley replaced.

1,044 vehicles · built 3 Jan 2024 to 6 Dec 2024

A concern has been identified on certain AJ20-D6 engines where the Front End Auxiliary Drive (FEAD) belt idler pulley may over-rotate following a high torsion input and lead to a clash with and damage to the oil pressure and temperature sensor. A damaged oil pressure and temperature sensor can lead to an oil leak from the engine which can result in a slip hazard for following road users particularly two-wheeled vehicles.

Fix: Vehicles will have the Front-End Auxiliary Drive (FEAD) idler pulley replaced.

1,414 vehicles · built 3 Jan 2024 to 28 Jun 2024

A concern has been identified on certain AJ20-D6 engines where the Front End Auxiliary Drive (FEAD) belt idler pulley may over-rotate following a high torsion input and lead to a clash with and damage to the oil pressure and temperature sensor. A damaged oil pressure and temperature sensor can lead to an oil leak from the engine which can result in a slip hazard for following road users particularly two-wheeled vehicles.

Fix: Vehicles will have the Front-End Auxiliary Drive (FEAD) idler pulley replaced.

741 vehicles · built 3 Jun 2024 to 17 Apr 2026

A concern has been identified where the connector to the driver’s airbag at the clockspring may experience fretting corrosion over time. This can lead to an increased resistance in the driver’s airbag circuit potentially resulting in the airbag failing to deploy when requested to do so. An airbag which fails to deploy as-intended will increase the risk of injury in the event of a crash.

Fix: Vehicles will have a protective lubricant gel applied to the driver’s airbag connector terminals.

93,330 vehicles · built 2 Apr 2019 to 4 Jun 2026

A concern has been identified where the connector to the driver’s airbag at the clockspring may experience fretting corrosion over time. This can lead to an increased resistance in the driver’s airbag circuit potentially resulting in the airbag failing to deploy when requested to do so. An airbag which fails to deploy as-intended will increase the risk of injury in the event of a crash.

Fix: Vehicles will have a protective lubricant gel applied to the driver’s airbag connector terminals.

27,858 vehicles · built 1 Jul 2020 to 5 Jun 2026

A concern has been identified where the connector to the driver’s airbag at the clockspring may experience fretting corrosion over time. This can lead to an increased resistance in the driver’s airbag circuit potentially resulting in the airbag failing to deploy when requested to do so. An airbag which fails to deploy as-intended will increase the risk of injury in the event of a crash.

Fix: Vehicles will have a protective lubricant gel applied to the driver’s airbag connector terminals.

30,444 vehicles · built 25 Sep 2020 to 4 Jun 2026

Vehicles have experienced thermal overload which may manifest in smoke or fire that may occur underneath the rear of the vehicle where the high voltage traction battery is located. The root cause is not yet known and investigations are continuing. A vehicle thermal overload condition such as fire or smoke can result in increased risk of occupant injury and/or injury to persons outside the vehicle as well as property damage.

Fix: Vehicles will be inspected by the retailer and as required at-risk battery packs will be replaced.

303 vehicles · built 7 Jul 2020 to 8 Apr 2025

Vehicles have experienced thermal overload which may manifest in smoke or fire that may occur underneath the rear of the vehicle where the high voltage traction battery is located. The root cause is not yet known and investigations are continuing. A vehicle thermal overload condition such as fire or smoke can result in increased risk of occupant injury and/or injury to persons outside the vehicle as well as property damage.

Fix: Vehicles will be inspected by the retailer and as required at-risk battery packs will be replaced.

458 vehicles · built 18 Aug 2020 to 24 Feb 2025

Vehicles have experienced thermal overload which may manifest in smoke or fire that may occur underneath the rear of the vehicle where the high voltage traction battery is located. The root cause is not yet known and investigations are continuing. A vehicle thermal overload condition such as fire or smoke can result in increased risk of occupant injury and/or injury to persons outside the vehicle as well as property damage.

Fix: Vehicles will be inspected by the retailer and as required at-risk battery packs will be replaced.

58 vehicles · built 1 Oct 2020 to 9 Jan 2025

A concern has been identified where the fuel tank wall thickness may be below design specification near the inlet check valve. A fuel tank with a thinner-than-designed wall may not perform adequately in the event of a crash leading to increased risk of fuel spillage and potentially fire.

Fix: Affected vehicles will have the fuel tank replaced.

32 vehicles · built 20 Jan 2026 to 30 Jan 2026

A concern has been identified where the fuel tank wall thickness may be below design specification near the inlet check valve. A fuel tank with a thinner-than-designed wall may not perform adequately in the event of a crash leading to increased risk of fuel spillage and potentially fire.

Fix: Affected vehicles will have the fuel tank replaced.

16 vehicles · built 22 Jan 2026 to 30 Jan 2026

Vehicles have experienced thermal overload which may manifest in smoke or fire that may occur underneath the rear of the vehicle where the high voltage traction battery is located. The root cause is not yet known and investigations are continuing. A vehicle thermal overload condition such as fire or smoke can result in increased risk of occupant injury and/or injury to persons outside the vehicle as well as property damage.

Fix: Vehicles will be inspected by the retailer and as required at-risk battery packs will be replaced.

42 vehicles · built 21 Jan 2021 to 13 Mar 2025

A concern has been identified on certain 2026 model year Range Rover Range Rover Sport and Range Rover Velar vehicles where the audio amplifiers may have been subject to water damage and may not provide any audio output including no seat belt reminder audible warnings to the driver. A seat belt reminder audible warning chime that does not alert of an unlatched seat belt can increase the risk of occupant injury in the event of a crash.

Fix: Affected vehicles will have the audio amplifier replaced.

3 vehicles · built 17 Feb 2026 to 27 Feb 2026

A concern has been identified on certain 2026 model year Range Rover Range Rover Sport and Range Rover Velar vehicles where the audio amplifiers may have been subject to water damage and may not provide any audio output including no seat belt reminder audible warnings to the driver. A seat belt reminder audible warning chime that does not alert of an unlatched seat belt can increase the risk of occupant injury in the event of a crash.

Fix: Affected vehicles will have the audio amplifier replaced.

17 vehicles · built 17 Feb 2026 to 27 Feb 2026

A concern has been identified on certain 2026 model year Range Rover Range Rover Sport and Range Rover Velar vehicles where the audio amplifiers may have been subject to water damage and may not provide any audio output including no seat belt reminder audible warnings to the driver. A seat belt reminder audible warning chime that does not alert of an unlatched seat belt can increase the risk of occupant injury in the event of a crash.

Fix: Affected vehicles will have the audio amplifier replaced.

16 vehicles · built 2 May 2026 to 3 Apr 2026

The manufacturer has identified a concern on certain Range Rover and Range Rover Sport vehicles where the adhesion process used to re-attach the panoramic roof side finishers during vehicle quality rework operations in the assembly plant may not have been sufficient. An inadequately adhered panoramic roof side finisher could over time come partially or completely loose. This could result in distraction to the driver or other road users or in the event of complete detachment harm to other road users particularly pedestrians or two-wheeled vehicles and increase the risk of injury or a crash.

Fix: Vehicles will have the panoramic roof side finisher removed and securely attached.

35 vehicles · built 12 Aug 2021 to 12 Oct 2025

The manufacturer has identified a concern on certain Range Rover and Range Rover Sport vehicles where the adhesion process used to re-attach the panoramic roof side finishers during vehicle quality rework operations in the assembly plant may not have been sufficient. An inadequately adhered panoramic roof side finisher could over time come partially or completely loose. This could result in distraction to the driver or other road users or in the event of complete detachment harm to other road users particularly pedestrians or two-wheeled vehicles and increase the risk of injury or a crash.

Fix: Vehicles will have the panoramic roof side finisher removed and securely attached.

36 vehicles · built 1 Dec 2022 to 21 Nov 2025

The manufacturer has identified a concern on certain Range Rover and Range Rover Sport plug-in hybrid vehicles where due to inadequate penetration of welding between the cells the battery’s capacity and therefore the vehicle’s electric range may be depleted below the design intent condition. A below-specification electric range will not meet the as-certified value for the vehicle and is therefore non-compliant to emissions legislation.

Fix: Vehicles will have the hybrid battery/modules replaced.

541 vehicles · built 26 Jan 2023 to 5 Jan 2025

The manufacturer has identified a concern on certain Range Rover and Range Rover Sport plug-in hybrid vehicles where due to inadequate penetration of welding between the cells the battery’s capacity and therefore the vehicle’s electric range may be depleted below the design intent condition. A below-specification electric range will not meet the as-certified value for the vehicle and is therefore non-compliant to emissions legislation.

Fix: Vehicles will have the hybrid battery/modules replaced.

1,803 vehicles · built 7 May 2023 to 30 Apr 2025

On affected vehicles a concern has been identified where the third-row lower seat belt anchorage bracket may contain a weld stud of insufficient ISO strength due to material contamination at the supplier. An insufficiently strong weld stud in this position could result in the safety restraint system not functioning correctly in the event of a crash increasing the risk of occupant injury.

Fix: Vehicles will have the third-row lower seat belt anchorage bracket replaced.

982 vehicles · built 11 Mar 2025 to 25 Mar 2026

A concern has been identified on certain Range Rover & Range Rover Sport PHEV (Plug-in Hybrid Electric Vehicle) vehicles containing high-voltage batteries with cells manufactured between 11th and 12th April 2018. Cathode damage introduced during the cell folding process can lead to high time-in-service cell degradation.

Fix: Data will be extracted from vehicles then the high voltage traction battery pack will be replaced.

19 vehicles · built 24 Jul 2018 to 11 Sep 2018

A concern has been identified on certain Range Rover & Range Rover Sport PHEV (Plug-in Hybrid Electric Vehicle) vehicles containing high-voltage batteries with cells manufactured between 11th and 12th April 2018. Cathode damage introduced during the cell folding process can lead to high time-in-service cell degradation.

Fix: Data will be extracted from vehicles then the high voltage traction battery pack will be replaced.

14 vehicles · built 20 Jul 2018 to 17 Nov 2018

On 2021 – 2024 and certain 2020 and 2025 Model Year Range Rover Evoque vehicles during a passenger airbag deployment the airbag may tear as a result of improper folding of the airbag during the airbag assembly process.

Fix: Affected Vehicles will have the passenger airbag module and associated components replaced.

48,997 vehicles · built 6 Sep 2019 to 9 Dec 2024

On Affected vehicles it is possible that moisture has entered the Gear Shift Module (GSM) during the assembly process. Under certain conditions there is a risk that this moisture could result in non-illumination of the Light Emitting Diode (LED) indicating the selected gear. Non-illumination of the LED gear indicator adjacent to the shifter would not conform to regulated requirements for automatic transmission control position indicator illumination.

Fix: Affected vehicles will have the Gear Shift Module replaced.

3 vehicles · built 27 Aug 2025 to 28 Aug 2025

On Affected vehicles it is possible that moisture has entered the Gear Shift Module (GSM) during the assembly process. Under certain conditions there is a risk that this moisture could result in non-illumination of the Light Emitting Diode (LED) indicating the selected gear. Non-illumination of the LED gear indicator adjacent to the shifter would not conform to regulated requirements for automatic transmission control position indicator illumination.

Fix: Affected vehicles will have the Gear Shift Module replaced.

113 vehicles · built 19 Aug 2025 to 29 Aug 2025

On Affected vehicles it is possible that moisture has entered the Gear Shift Module (GSM) during the assembly process. Under certain conditions there is a risk that this moisture could result in non-illumination of the Light Emitting Diode (LED) indicating the selected gear. Non-illumination of the LED gear indicator adjacent to the shifter would not conform to regulated requirements for automatic transmission control position indicator illumination.

Fix: Affected vehicles will have the Gear Shift Module replaced.

33 vehicles · built 26 Aug 2025 to 22 Oct 2025

On Affected vehicles it is possible that moisture has entered the Gear Shift Module (GSM) during the assembly process. Under certain conditions there is a risk that this moisture could result in non-illumination of the Light Emitting Diode (LED) indicating the selected gear. Non-illumination of the LED gear indicator adjacent to the shifter would not conform to regulated requirements for automatic transmission control position indicator illumination.

Fix: Affected vehicles will have the Gear Shift Module replaced.

64 vehicles · built 19 Aug 2025 to 29 Aug 2025

The manufacturer identified that on a small number of vehicles the JLR N759 safety recall repair procedure had not been carried out correctly. The suspension knuckles had not been replaced in all cases where the repair instruction directed a replacement leaving the defect present on the vehicles.

Fix: Both front suspension knuckles will be inspected for the presence of any cracks. Where no crack is present and where available a retaining bracket will be fitted to the joint. Where cracks are found or a bracket is not available the front suspension knuckle will be replaced.

42 vehicles · built 8 Oct 2014 to 26 Mar 2015

On affected vehicles due to a software issue in the Electric Power Inverter Converter B (EPICB) it is possible that as the high voltage battery depletes during driving in EV mode the engine may not restart when the state of charge reduces and the vehicle will therefore lose power. There will not be an associated warning to the driver.

Fix: Vehicle’s software to be updated in the Electric Power Inverter Converter B (EPICB) and other modules as required to ensure complete cross-module integration. In parallel an over-the-air update will be rolled out and customers who successfully complete this update will not need to visit a retailer.

9,298 vehicles · built 27 Oct 2021 to 17 Jul 2025

On affected vehicles due to a software issue in the Electric Power Inverter Converter B (EPICB) it is possible that as the high voltage battery depletes during driving in EV mode the engine may not restart when the state of charge reduces and the vehicle will therefore lose power. There will not be an associated warning to the driver.

Fix: Vehicle’s software to be updated in the Electric Power Inverter Converter B (EPICB) and other modules as required to ensure complete cross-module integration. In parallel an over-the-air update will be rolled out and customers who successfully complete this update will not need to visit a retailer.

19,639 vehicles · built 2 Nov 2021 to 17 Jul 2025

The manufacturer has determined that in affected vehicles the instructions provided on the method of use of detachable tow balls does not adequately warn of a non-obvious risk which could lead to a failure of the tow ball mechanism causing in-use detachment of the tow ball and trailer detachment.

Fix: Customers will be provided with an additional retaining bracket to fit to the vehicle when using the detachable tow ball together with full installation instructions.

109,574 vehicles · built 28 May 2004 to 16 Sep 2016

The manufacturer has determined that in affected vehicles the instructions provided on the method of use of detachable tow balls does not adequately warn of a non-obvious risk which could lead to a failure of the tow ball mechanism causing in-use detachment of the tow ball and trailer detachment.

Fix: Customers will be provided with an additional retaining bracket to fit to the vehicle when using the detachable tow ball together with full installation instructions.

86,596 vehicles · built 26 Nov 2002 to 5 Mar 2013

On affected vehicles the turbocharger oil feed pipe clamp may have been installed in the incorrect orientation. Incorrectly installed pipe clamp will not provide sufficient clamp load and therefore risk an oil leak.

Fix: Replace oil feed pipe O-rings and fit replacement pipe clamp correctly.

22 vehicles · built 31 Jan 2024 to 15 May 2024

On affected vehicles the turbocharger oil feed pipe clamp may have been installed in the incorrect orientation. Incorrectly installed pipe clamp will not provide sufficient clamp load and therefore risk an oil leak.

Fix: Replace oil feed pipe O-rings and fit replacement pipe clamp correctly.

52 vehicles · built 10 Oct 2023 to 16 Apr 2024

On affected vehicles the turbocharger oil feed pipe clamp may have been installed in the incorrect orientation. Incorrectly installed pipe clamp will not provide sufficient clamp load and therefore risk an oil leak.

Fix: Replace oil feed pipe O-rings and fit replacement pipe clamp correctly.

21 vehicles · built 12 Dec 2023 to 8 May 2024

Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. there is no fault with Jaguar Land Rover's security systems and they continue to meet stringent automotive legislation. Jaguar Land Rover is offering owners guidance on how to maximise vehicle security and protect against theft.

Fix: Vehicle registered keepers will be sent a security guidance letter only - there is no repair action.

32,752 vehicles · built 5 Oct 2016 to 5 Nov 2020

Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. there is no fault with Jaguar Land Rover's security systems and they continue to meet stringent automotive legislation. Jaguar Land Rover is offering owners guidance on how to maximise vehicle security and protect against theft.

Fix: Vehicle registered keepers will be sent a security guidance letter only - there is no repair action.

14,179 vehicles · built 17 Jan 2013 to 19 Jun 2015

Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. there is no fault with Jaguar Land Rover's security systems and they continue to meet stringent automotive legislation. Jaguar Land Rover is offering owners guidance on how to maximise vehicle security and protect against theft.

Fix: Vehicle registered keepers will be sent a security guidance letter only - there is no repair action.

21,386 vehicles · built 8 Jan 2013 to 29 Jun 2015

Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. there is no fault with Jaguar Land Rover's security systems and they continue to meet stringent automotive legislation. Jaguar Land Rover is offering owners guidance on how to maximise vehicle security and protect against theft.

Fix: Vehicle registered keepers will be sent a security guidance letter only - there is no repair action.

7,473 vehicles · built 23 Apr 2013 to 30 Jun 2015

Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. there is no fault with Jaguar Land Rover's security systems and they continue to meet stringent automotive legislation. Jaguar Land Rover is offering owners guidance on how to maximise vehicle security and protect against theft.

Fix: Vehicle registered keepers will be sent a security guidance letter only - there is no repair action.

8,807 vehicles · built 14 Jun 2013 to 17 May 2015

Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. there is no fault with Jaguar Land Rover's security systems and they continue to meet stringent automotive legislation. Jaguar Land Rover is offering owners guidance on how to maximise vehicle security and protect against theft.

Fix: Vehicle registered keepers will be sent a security guidance letter only - there is no repair action.

6,722 vehicles · built 28 May 2014 to 30 Jun 2015

On affected vehicles the second-row centre seat belt buckle may have been manufactured incorrectly. An internal obstruction to the seat belt tongue can prevent correct latching. In the event of a crash an insecurely latched seat belt buckle could increase the risk of personal injury.

Fix: Vehicles will have the centre seat belt buckle and buckle retaining bolt replaced.

178 vehicles · built 19 Dec 2024 to 19 Feb 2025

On affected vehicles the second-row centre seat belt buckle may have been manufactured incorrectly. An internal obstruction to the seat belt tongue can prevent correct latching. In the event of a crash an insecurely latched seat belt buckle could increase the risk of personal injury.

Fix: Vehicles will have the centre seat belt buckle and buckle retaining bolt replaced.

1,448 vehicles · built 19 Dec 2024 to 19 Feb 2025

The manufacturer has determined on affected vehicles the routing of low-pressure fuel pipes may clash with the rear right-hand damper. There is a risk that the fuel pipe could abrade and cause a fuel leak.

Fix: Vehicles will have the fuel line replaced and an additional fuel line bracket fitted together with revised routing for the fuel pipe

7 vehicles · built 12 Jan 2012 to 9 Oct 2015

Affected vehicles have had an incorrect set of settings in Dynamic Mode. Dynamic Mode therefore does not provide adequate stability suspension stiffness nor provide adequate stability control system operation thereby increasing the risk of loss of vehicle control.

Fix: Vehicles will have dynamic mode disabled.

20 vehicles · built 1 Jul 2024 to 24 Jan 2025

On affected vehicles the aftermarket-supplied raised air intake could become partially or fully detached from the vehicle due to inadequate attachment force at the A-pillar.

Fix: The vehicles will have their raised air intakes removed a revised fixing installed and refitted.

1,299 vehicles · built 8 Sep 2023 to 30 Sep 2024

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

16,299 vehicles · built 2 Feb 2015 to 6 Nov 2017

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

30,693 vehicles · built 2 Feb 2015 to 10 Nov 2017

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

80,305 vehicles · built 13 Mar 2015 to 23 Nov 2018

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

27,095 vehicles · built 22 Jan 2015 to 9 Nov 2017

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

87,669 vehicles · built 6 Mar 2015 to 10 Jun 2019

On affected vehicles the 48V cable could become too close to an underbody cross-brace and rub against the metal cross-brace exposing the cable core resulting in a short circuit and risk of fire.

Fix: Inspect harness and as needed reposition the routing bracket as necessary.

1 vehicles · built 28 Jun 2024 to 1 Jul 2024

For affected vehicles the clutch plates within the hybrid transmission may have been manufactured with a flatness out of tolerance to the engineering specification.

Fix: Diagnostic test to determine whether the clutch packs within the transmission are operating as expected. Any transmissions which fail the test will be replaced.

142 vehicles · built 4 Sep 2023 to 14 Feb 2024

For affected vehicles the clutch plates within the hybrid transmission may have been manufactured with a flatness out of tolerance to the engineering specification.

Fix: Diagnostic test to determine whether the clutch packs within the transmission are operating as expected. Any transmissions which fail the test will be replaced.

22 vehicles · built 6 Sep 2023 to 1 Dec 2023

Affected vehicles have a Turbocharger oil feed pipe that may over time loosen and lead to an oil leak

Fix: Replace the Turbocharger oil feed pipe O-rings and install an additional clamp.

21,059 vehicles · built 11 Mar 2020 to 11 Jul 2024

Affected vehicles have a Turbocharger oil feed pipe that may over time loosen and lead to an oil leak

Fix: Replace the Turbocharger oil feed pipe O-rings and install an additional clamp.

9,259 vehicles · built 8 Jan 2020 to 25 Jul 2024

Affected vehicles have a Turbocharger oil feed pipe that may over time loosen and lead to an oil leak

Fix: Replace the Turbocharger oil feed pipe O-rings and install an additional clamp.

10,523 vehicles · built 27 Jan 2020 to 4 Sep 2024

On affected vehicles the incorrect specification of plastic was used to manufacture the oil filter housing. This housing may over time and with vehicle use crack. This could result in oil under pressure leaking and coming into contact with hot components of the engine which may result in a fire. Additionally oil may leak onto the road surface posing a skid hazard.

Fix: Replace the oil filter housing complete with filter and associated O-rings.

382 vehicles · built 1 Dec 2020 to 7 Feb 2024

On affected vehicles the incorrect specification of plastic was used to manufacture the oil filter housing. This housing may over time and with vehicle use crack. This could result in oil under pressure leaking and coming into contact with hot components of the engine which may result in a fire. Additionally oil may leak onto the road surface posing a skid hazard.

Fix: Replace the oil filter housing complete with filter and associated O-rings.

599 vehicles · built 3 Dec 2020 to 27 Feb 2024

On affected vehicles the incorrect specification of plastic was used to manufacture the oil filter housing. This housing may over time and with vehicle use crack. This could result in oil under pressure leaking and coming into contact with hot components of the engine which may result in a fire. Additionally oil may leak onto the road surface posing a skid hazard.

Fix: Replace the oil filter housing complete with filter and associated O-rings.

291 vehicles · built 14 Apr 2021 to 5 Mar 2024

On affected vehicles the incorrect specification of plastic was used to manufacture the oil filter housing. This housing may over time and with vehicle use crack. This could result in oil under pressure leaking and coming into contact with hot components of the engine which may result in a fire. Additionally oil may leak onto the road surface posing a skid hazard.

Fix: Replace the oil filter housing complete with filter and associated O-rings.

263 vehicles · built 22 Apr 2021 to 12 Jan 2024

On affected vehicles the incorrect specification of plastic was used to manufacture the oil filter housing. This housing may over time and with vehicle use crack. This could result in oil under pressure leaking and coming into contact with hot components of the engine which may result in a fire. Additionally oil may leak onto the road surface posing a skid hazard.

Fix: Replace the oil filter housing complete with filter and associated O-rings.

31 vehicles · built 26 Sep 2023 to 12 Mar 2024

On affected vehicles converted by JLR Classic Works the brake pipes may have been incorrectly assembled to the brake modulator.

Fix: Vehicles will have the brake pipe routing inspected and corrected if necessary.

6 vehicles · built 19 Oct 2011 to 21 Jan 2016

For the affected vehicle a concern has been identified where the there is an inadequate depth of weld (penetration) between the busbar and the anode in the module of the Plug-in Hybrid Electric Vehicle (PHEV) battery.

Fix: Replacement of the traction battery.

Vehicle count not given · built 11 Jan 2024 to 11 Jan 2024

For the affected vehicle a concern has been identified where the there is an inadequate depth of weld (penetration) between the busbar and the anode in the module of the Plug-in Hybrid Electric Vehicle (PHEV) battery.

Fix: Replacement of the traction battery.

1 vehicles · built 11 Jan 2024 to 18 Jan 2024

A concern has been identified where the clamps used to secure the fuel injectors into the cylinder head on certain AJ20-D6 engines may crack allowing the injector to come loose. This loose injector could become unseated allowing fuel to be pushed past the injector seal from the combustion chamber or the fuel feed system.

Fix: A fuel leak in this area could result in fuel spill onto hot engine components which may result in a fire.

1 vehicles · built 24 Nov 2023 to 24 Nov 2023

A concern has been identified where the clamps used to secure the fuel injectors into the cylinder head on certain AJ20-D6 engines may crack allowing the injector to come loose. This loose injector could become unseated allowing fuel to be pushed past the injector seal from the combustion chamber or the fuel feed system.

Fix: A fuel leak in this area could result in fuel spill onto hot engine components which may result in a fire.

2 vehicles · built 21 Nov 2023 to 3 Dec 2023

A concern has been identified where the clamps used to secure the fuel injectors into the cylinder head on certain AJ20-D6 engines may crack allowing the injector to come loose. This loose injector could become unseated allowing fuel to be pushed past the injector seal from the combustion chamber or the fuel feed system.

Fix: A fuel leak in this area could result in fuel spill onto hot engine components which may result in a fire.

Vehicle count not given · built 27 Nov 2023 to 27 Nov 2023

On affected vehicles the right-hand tailgate and body mounted rear lamps may experience water ingress leading to one or more lamp failures.

Fix: The right-hand tailgate and body mounted lamps will be replaced

Vehicle count not given · built 1 Jul 2022 to 30 Nov 2022

On affected vehicles the right-hand tailgate and body mounted rear lamps may experience water ingress leading to one or more lamp failures.

Fix: The right-hand tailgate and body mounted lamps will be replaced

1,582 vehicles · built 1 Jul 2022 to 30 Nov 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

524 vehicles · built 2 Nov 2020 to 4 May 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

6,248 vehicles · built 17 Sep 2020 to 30 Jun 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

15,408 vehicles · built 17 Jul 2019 to 19 Jan 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

16,598 vehicles · built 28 Sep 2020 to 24 Feb 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

9,761 vehicles · built 29 Sep 2020 to 24 Feb 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

5,105 vehicles · built 28 Sep 2020 to 19 Jan 2022

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

14,517 vehicles · built 25 Sep 2020 to 26 Feb 2024

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

17,148 vehicles · built 11 Aug 2021 to 26 Feb 2024

For affected vehicles the manufacturer has developed a software enhancement to further increase vehicle security.

Fix: The software enhancement will deploy this update and reduce the theft risk.

47,815 vehicles · built 2 Apr 2019 to 27 Feb 2024

Affected vehicles may have a right-hand side lower A Pillar bolt that may not have been tightened to the correct torque. In the event of a crash the body structure may be impaired increasing the risk of injury to the occupants of the vehicle.

Fix: Check bolt and tighten to correct torque if necessary.

782 vehicles · built 26 Oct 2023 to 30 Jan 2024

On affected vehicles there is concern that the structural adhesive applied to the bodyshell has been mis-applied.

Fix: Install two rivets and seal with approved sealant.

4 vehicles · built 3 Oct 2023 to 13 Oct 2023

On affected vehicles there is concern that the structural adhesive applied to the bodyshell has been mis-applied.

Fix: Install two rivets and seal with approved sealant.

4 vehicles · built 3 Oct 2023 to 13 Oct 2023

On affected Range Rover vehicles fitted with V8 Gasoline NC11 engines the fixings used to secure the engine mounted oil cooler hoses have been found to have inadequate thread engagement.

Fix: Vehicles will have the engine oil cooler pipe fixings inspected and replaced if required.

67 vehicles · built 20 Sep 2023 to 11 Oct 2023

On affected Range Rover vehicles fitted with V8 Gasoline NC11 engines the fixings used to secure the engine mounted oil cooler hoses have been found to have inadequate thread engagement.

Fix: Vehicles will have the engine oil cooler pipe fixings inspected and replaced if required.

67 vehicles · built 4 Sep 2023 to 20 Oct 2023

On affected Plug-in Hybrid Electric Vehicles (PHEV) it is possible that the internal combustion engine will not start when required. This may occur whilst the vehicle is in motion and the vehicle will operate in Electric Vehicle (EV) Mode only. When the EV system is no longer able to propel the vehicle the vehicle will unexpectedly slow down and no drive is possible.

Fix: Software update to the Powertrain control module.

770 vehicles · built 3 Nov 2022 to 21 Sep 2023

On affected Plug-in Hybrid Electric Vehicles (PHEV) it is possible that the internal combustion engine will not start when required. This may occur whilst the vehicle is in motion and the vehicle will operate in Electric Vehicle (EV) Mode only. When the EV system is no longer able to propel the vehicle the vehicle will unexpectedly slow down and no drive is possible.

Fix: Software update to the Powertrain control module.

770 vehicles · built 3 Jul 2023 to 23 Sep 2023

Front axle casing may fail causing the suspension to collapse.

Fix: Fit an additional bracket mounted to the end of the axle case tube to ensure that in the event of failure the wheel hub assembly and suspension is restrained.

9,923 vehicles · built 1 Sep 2010 to 28 Sep 2012

For certain vehicles the bolt connecting the busbar to the traction battery module connector has not achieved the required clamp force. Arcing at the joint and excessive heat generation cannot be ruled out with the consequence that this may lead to a vehicle fire.�

Fix: Replacement of the High Voltage battery

2 vehicles · built 6 Jan 2023 to 8 Feb 2023

For certain vehicles the bolt connecting the busbar to the traction battery module connector has not achieved the required clamp force. Arcing at the joint and excessive heat generation cannot be ruled out with the consequence that this may lead to a vehicle fire.�

Fix: Replacement of the High Voltage battery

2 vehicles · built 9 Dec 2022 to 3 Mar 2023

On certain 2014 - 2016 Model Year Land Rover Range Rover vehicles the front suspension upper knuckle joint could develop a crack. In extreme cases where a crack in the front suspension knuckle has developed this may lead to detachment of the upper suspension arm.�

Fix: Carry out an inspection of the front suspension knuckles and replace parts if required.�

4,507 vehicles · built 1 Oct 2014 to 31 Mar 2015

On certain 2014 - 2016 Model Year Land Rover Range Rover vehicles the front suspension upper knuckle joint could develop a crack. In extreme cases where a crack in the front suspension knuckle has developed this may lead to detachment of the upper suspension arm.�

Fix: Carry out an inspection of the front suspension knuckles and replace parts if required.�

2,796 vehicles · built 2 Nov 2015 to 16 Mar 2016

On affected 2022 - 2023 Model Year Land Rover Range Rover vehicles the external rear lamp mounted in the body could partially or permanently fail to operate resulting in one or more of the light sources not working.

Fix: Affected vehicles will have the foam block mounted in the bodyshell removed. The rear lamp mounted in the body and rear tail lamp link lead wiring will be checked for their condition. Where the lamp and wiring are qualified OK no further remedy is required. Where the lamp or wiring are qualified Not OK the lamp will be replaced.

5,299 vehicles · built 23 Sep 2020 to 29 Nov 2022

On affected vehicles the second row 60% seat frame may have a latch installed with a defective weld. In vehicles that have a defective weld on the second row 60% seat frame latch the seat may not be correctly secured.

Fix: The rear seat base latch will be inspected. Where the inspection reveals a not OK condition the rear seat 60% frame and associated components will be replaced.

192 vehicles · built 8 Dec 2021 to 6 Jul 2022

On affected vehicles there is an issue involving the seat latch in the area of the third row of seats for where injury in the event of an incident cannot be ruled out.

Fix: The third-row seat back latch operation will be checked. Where the seat latches operate correctly no further action is required. Where a latch does not operate properly the seat frame and associated components will be replaced.

318 vehicles · built 27 Jul 2021 to 9 Jan 2023

For certain 2023 Model Year 3.0L AJ20-P6 Land Rover Range Rover Range Rover Sport Range Rover Velar Discovery and Defender vehicles a small number of engines the cam carrier oil gallery hasn�t been fully drilled. As a result the oil channel could be blocked leading to accumulation of oil against the pressure control valve rubber membrane and subsequently an external oil leak or increased oil carryover into the air intake system.

Fix: The engine cam carrier will be inspected and where an incorrectly machined cam carrier is found replace it with a correctly machined component. Depending on mileage and engine conditions further associated components may require replacement.

499 vehicles · built 24 Aug 2022 to 9 Jan 2023

For certain 2023 Model Year 3.0L AJ20-P6 Land Rover Range Rover Range Rover Sport Range Rover Velar Discovery and Defender vehicles a small number of engines the cam carrier oil gallery hasn�t been fully drilled. As a result the oil channel could be blocked leading to accumulation of oil against the pressure control valve rubber membrane and subsequently an external oil leak or increased oil carryover into the air intake system.

Fix: The engine cam carrier will be inspected and where an incorrectly machined cam carrier is found replace it with a correctly machined component. Depending on mileage and engine conditions further associated components may require replacement.

499 vehicles · built 24 Aug 2022 to 9 Jan 2023

For certain 2023 Model Year 3.0L AJ20-P6 Land Rover Range Rover Range Rover Sport Range Rover Velar Discovery and Defender vehicles a small number of engines the cam carrier oil gallery hasn�t been fully drilled. As a result the oil channel could be blocked leading to accumulation of oil against the pressure control valve rubber membrane and subsequently an external oil leak or increased oil carryover into the air intake system.

Fix: The engine cam carrier will be inspected and where an incorrectly machined cam carrier is found replace it with a correctly machined component. Depending on mileage and engine conditions further associated components may require replacement.

499 vehicles · built 24 Aug 2022 to 9 Jan 2023

For certain 2023 Model Year 3.0L AJ20-P6 Land Rover Range Rover Range Rover Sport Range Rover Velar Discovery and Defender vehicles a small number of engines the cam carrier oil gallery hasn�t been fully drilled. As a result the oil channel could be blocked leading to accumulation of oil against the pressure control valve rubber membrane and subsequently an external oil leak or increased oil carryover into the air intake system.

Fix: The engine cam carrier will be inspected and where an incorrectly machined cam carrier is found replace it with a correctly machined component. Depending on mileage and engine conditions further associated components may require replacement.

499 vehicles · built 24 Aug 2022 to 9 Jan 2023

For certain 2023 Model Year 3.0L AJ20-P6 Land Rover Range Rover Range Rover Sport Range Rover Velar Discovery and Defender vehicles a small number of engines the cam carrier oil gallery hasn�t been fully drilled. As a result the oil channel could be blocked leading to accumulation of oil against the pressure control valve rubber membrane and subsequently an external oil leak or increased oil carryover into the air intake system.

Fix: The engine cam carrier will be inspected and where an incorrectly machined cam carrier is found replace it with a correctly machined component. Depending on mileage and engine conditions further associated components may require replacement.

499 vehicles · built 24 Aug 2022 to 9 Jan 2023

On affected vehicles there is a risk where the water pump pully drive belt can become damaged leading to detachment or destruction. Where water pump pully drive is lost this leads to a loss coolant flow in the engine.

Fix: Affected vehicles will have the engine coolant elbow replaced. In addition a turbocharger feed coolant pipe will be replaced.

18,151 vehicles · built 15 Jul 2020 to 18 Jan 2023

On affected vehicles there is a risk where the water pump pully drive belt can become damaged leading to detachment or destruction. Where water pump pully drive is lost this leads to a loss coolant flow in the engine.

Fix: Affected vehicles will have the engine coolant elbow replaced. In addition a turbocharger feed coolant pipe will be replaced.

18,151 vehicles · built 28 Mar 2017 to 28 Apr 2022

On affected vehicles there is a risk where the water pump pully drive belt can become damaged leading to detachment or destruction. Where water pump pully drive is lost this leads to a loss coolant flow in the engine.

Fix: Affected vehicles will have the engine coolant elbow replaced. In addition a turbocharger feed coolant pipe will be replaced.

18,151 vehicles · built 6 Apr 2017 to 10 Dec 2021

On affected vehicles there is a risk where the water pump pully drive belt can become damaged leading to detachment or destruction. Where water pump pully drive is lost this leads to a loss coolant flow in the engine.

Fix: Affected vehicles will have the engine coolant elbow replaced. In addition a turbocharger feed coolant pipe will be replaced.

18,151 vehicles · built 9 Dec 2019 to 25 Jan 2023

On certain Classic Defender Works V8 70th Edition (90 Derivative) vehicles the front anti-roll bar diameter is too small and is the wrong specification for the vehicle application.

Fix: Replace the front anti-roll bar with one of the correct specification and associated fixings.

44 vehicles · built 10 Jun 2009 to 25 Jan 2016

On certain vehicles the left-hand headlamp aim has been set incorrectly.

Fix: Vehicles will have the left-hand headlamp aim adjusted to correct the issue.

3 vehicles · built 23 Aug 2022 to 29 Sep 2022

Some of the hot end exhaust bracket fixings may not have been fastened or not have been fastened to the required torque.

Fix: Check for the presence of the exhaust bracket fixings and where necessary install new fixings or tighten existing fixings to the specified torque.

1,392 vehicles · built 25 Sep 2020 to 7 Jun 2022

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Fix: Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

2,981 vehicles · built 12 Dec 2021 to 18 May 2022

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Fix: Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

2,981 vehicles · built 12 Dec 2021 to 18 May 2022

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Fix: Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

2,981 vehicles · built 12 Dec 2021 to 18 May 2022

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Fix: Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

2,981 vehicles · built 12 Dec 2021 to 18 May 2022

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Fix: Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

2,981 vehicles · built 12 Dec 2021 to 18 May 2022

The front crash sensor fixings may not have been installed to the specified level of torque.

Fix: Check and tighten the front crash sensor fixing to the specified level of torque.

254 vehicles · built 29 Nov 2021 to 31 Mar 2022

The rubberised low-pressure fuel feed hose assembly may have been incorrectly routed during manufacture

Fix: Inspect the low-pressure fuel feed hose assembly and if misrouted replace the assembly.

668 vehicles · built 6 Oct 2018 to 27 Jun 2019

The front passenger seats were manufactured without the Occupancy Detection Sensor system (ODS) installed.

Fix: Fit the occupant detection sensor to the front passenger seat.

509 vehicles · built 10 Jul 2020 to 11 Aug 2021

The front passenger seats were manufactured without the Occupancy Detection Sensor system (ODS) installed.

Fix: Fit the occupant detection sensor to the front passenger seat.

509 vehicles · built 10 Jul 2020 to 11 Aug 2021

The upper cover of the rear spoiler may delaminate and on rare occasions detach from the main body of the rear spoiler.

Fix: Inspect the spoiler assembly and if it has not begun to delaminate a new specification adhesive will be applied. Where the outer surface of the rear spoiler has already detached and has been lost or damaged a new rear spoiler will be installed.

14,215 vehicles · built 18 Feb 2009 to 28 Mar 2011

The front seat track end stop bracket may become deformed.

Fix: Replace the front seat tracks with a modified part.

1,025 vehicles · built 7 Dec 2020 to 9 Apr 2021

Vehicles may have received during a repair a remanufactured steering rack where the track rod ends have not been installed correctly.

Fix: Inspect the steering rack and repair if required

62 vehicles · built 21 Nov 2013 to 23 Aug 2017

The rubberised fuel return hose assembly may have been incorrectly manufactured.

Fix: Inspect the date code on the fuel return pipe and replace the part if necessary.

7,502 vehicles · built 8 Jan 2020 to 27 Apr 2021

The rubberised fuel return hose assembly may have been incorrectly manufactured.

Fix: Inspect the date code on the fuel return pipe and replace the part if necessary.

7,502 vehicles · built 8 Jan 2020 to 27 Apr 2021

The rubberised fuel return hose assembly may have been incorrectly manufactured.

Fix: Inspect the date code on the fuel return pipe and replace the part if necessary.

7,502 vehicles · built 8 Jan 2020 to 27 Apr 2021

Due to insufficient contact of the battery earth stud to the chassis the vehicle may exhibit various electrical faults.

Fix: Replace the earth stud with a bespoke aftermarket specification part.

3,323 vehicles · built 5 Nov 2019 to 11 Mar 2021

The Emergency Locking Retractor (ELR) in the front right hand side seat belt assembly may not function correctly.

Fix: Inspect the seat belt assembly and replace if required.

1,618 vehicles · built 16 Feb 2021 to 8 Mar 2021

The fixings connecting the exhaust downpipe to the catalytic converter may not have been tightened to the specified torque value.

Fix: Inspect the exhaust downpipe to catalytic converter joint. If the fixings are present torque them up to the required torque specification. If any fixings are missing they will be replaced and torqued to the required specification.

4,002 vehicles · built 2 Nov 2020 to 11 Mar 2021

The fixings connecting the exhaust downpipe to the catalytic converter may not have been tightened to the specified torque value.

Fix: Inspect the exhaust downpipe to catalytic converter joint. If the fixings are present torque them up to the required torque specification. If any fixings are missing they will be replaced and torqued to the required specification.

4,002 vehicles · built 2 Nov 2020 to 11 Mar 2021

The front seat material does not meet the regulation required burn rate

Fix: Replace the seat covering on the front seats.

55 vehicles · built 18 Jul 2018 to 14 Jul 2020

The 2nd row seat belt assemblies may contain a physical seatbelt retractor part which is of a different specification to that intended for the destination market.

Fix: Replace the 2nd row seat belt assemblies with the correct specification parts.

29 vehicles · built 30 Sep 2020 to 26 Oct 2020

The fixing for the left hand side (LHS) 3rd Row Seat Belt upper anchorage may not be installed to the required specification.

Fix: Inspect the rear (3rd row) seat belt anchorage fixing and the rear trim and replace the fixing if necessary.

115 vehicles · built 30 Sep 2020 to 26 Oct 2020

Insufficient contact of the battery earth stud to the chassis.

Fix: Replace the earth stud with a modified part.

10,040 vehicles · built 21 Sep 2018 to 31 Aug 2020

The Exhaust Gas Recirculation (EGR) crossover pipe may have been manufactured away from specification.

Fix: Check and repair the vehicle with a part manufactured to the correct specification.

144 vehicles · built 27 Aug 2020 to 29 Sep 2020

The Exhaust Gas Recirculation (EGR) crossover pipe may have been manufactured away from specification.

Fix: Check and repair the vehicle with a part manufactured to the correct specification.

144 vehicles · built 27 Aug 2020 to 29 Sep 2020

An electrical overload event in the 48Volt (V) electrical system may cause a failure of the Metal Oxide Semiconductor Field Effect Transistor.

Fix: The vehicles will be updated with the latest software which mitigates the electrical failure condition.

45,275 vehicles · built 25 May 2018 to 2 Oct 2020

An electrical overload event in the 48Volt (V) electrical system may cause a failure of the Metal Oxide Semiconductor Field Effect Transistor.

Fix: The vehicles will be updated with the latest software which mitigates the electrical failure condition.

45,275 vehicles · built 25 May 2018 to 2 Oct 2020

The Telematics Service Delivery Platform has incorrectly configured the in-vehicle eCall phone number.

Fix: Update the Telematics Service Delivery Platform.

23,127 vehicles · built 5 Jul 2018 to 29 Jan 2020

Second row seat fixings missing

Fix: Replace the second row seat frame and ensure the fixings are tightened correctly

10 vehicles · built 11 Sep 2019 to 4 Dec 2019

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Fix: Solutions include hardware and software changes.

15,969 vehicles · built 13 Mar 2015 to 12 Jun 2018

The front or rear windshield washer system may fail should the system be operated in freezing or blocked conditions.

Fix: Uprate fuse and replace junction box lid. Insert supplement in handbook

6,387 vehicles · built 5 Oct 2018 to 4 Apr 2019

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Fix: Update the vehicle software to the latest version.

4,779 vehicles · built 9 Mar 2015 to 5 Jul 2018

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Fix: Update the vehicle software to the latest version.

4,779 vehicles · built 9 Mar 2015 to 5 Jul 2018

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Fix: Update the vehicle software to the latest version.

4,779 vehicles · built 9 Mar 2015 to 5 Jul 2018

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Fix: Update the vehicle software to the latest version.

4,779 vehicles · built 9 Mar 2015 to 5 Jul 2018

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Fix: Update the vehicle software to the latest version.

4,779 vehicles · built 9 Mar 2015 to 5 Jul 2018

The routing of the electrical harness within the steering column assembly has insufficient clearance.

Fix: Inspect the steering column electrical harness apply further protective material and repair damaged wiring where required.

38 vehicles · built 15 Feb 2019 to 20 Feb 2019

The routing of the electrical harness within the steering column assembly has insufficient clearance.

Fix: Inspect the steering column electrical harness apply further protective material and repair damaged wiring where required.

38 vehicles · built 15 Feb 2019 to 20 Feb 2019

The indicated fuel level may be inaccurate.

Fix: The fuel sender arm and wiring will be checked and fitted with an additional retainer.

1,834 vehicles · built 5 Oct 2018 to 5 Mar 2019

The crankshaft pulley retaining bolt may fracture due to a production specification error.

Fix: Replace the crankshaft pulley centre retaining bolt with one that has been manufactured to the correct specification.

219 vehicles · built 10 Oct 2018 to 19 Dec 2018

The crankshaft pulley retaining bolt may fracture due to a production specification error.

Fix: Replace the crankshaft pulley centre retaining bolt with one that has been manufactured to the correct specification.

219 vehicles · built 10 Oct 2018 to 19 Dec 2018

The directional indicators may fail to operate.

Fix: Update the vehicle with the latest software on affected vehicles.

2,331 vehicles · built 10 Nov 2017 to 18 Dec 2018

The directional indicators may fail to operate.

Fix: Update the vehicle with the latest software on affected vehicles.

2,331 vehicles · built 10 Nov 2017 to 18 Dec 2018

The crankshaft pulley retaining bolt may fracture due to a production specification error.

Fix: Replace the crankshaft pulley centre retaining bolt with one that has been manufactured to the correct specification.

219 vehicles · built 10 Oct 2018 to 19 Dec 2018

The crankshaft pulley retaining bolt may fracture due to a production specification error.

Fix: Replace the crankshaft pulley centre retaining bolt with one that has been manufactured to the correct specification.

219 vehicles · built 10 Oct 2018 to 19 Dec 2018

Autonomous Emergency Braking (AEB) feature will not be available.

Fix: On affected vehicles download the latest software to the vehicle.

24 vehicles · built 13 Nov 2017 to 17 Mar 2018

Autonomous Emergency Braking (AEB) feature will not be available.

Fix: On affected vehicles download the latest software to the vehicle.

24 vehicles · built 13 Nov 2017 to 17 Mar 2018

Autonomous Emergency Braking (AEB) feature will not be available.

Fix: On affected vehicles download the latest software to the vehicle.

24 vehicles · built 13 Nov 2017 to 17 Mar 2018

On certain 2018 and 2019 Model Year Land Rover Range Rover and Range Rover Sport PHEV vehicles where the indicated fuel level on the fuel gauge shows approximately 30% the fuel tank is empty resulting in an engine stall. The vehicle will enter into reduced performance mode and if the customer continues to drive the vehicle will continue to run for circa 8 miles/13Km. The vehicle engine will then cut out without warning. If the traction battery charge status is at least 10% or greater the electric motor will take up drive until such time as traction battery power is depleted. Where the traction battery charge status is below 10% drive from the electric motor is not possible and the vehicle will cut out whilst in motion. All 12 volt powered electrical functions such as power assisted steering exterior lighting and brake assistance will continue to operate as designed. Engine cut out with minimal warning to the driver may lead to an increased risk of an accident.

Fix: Fit a new revised fuel level sensor float to the vehicle.

1,000 vehicles · built 28 Mar 2017 to 25 May 2018

On certain 2018 and 2019 Model Year Land Rover Range Rover and Range Rover Sport PHEV vehicles where the indicated fuel level on the fuel gauge shows approximately 30% the fuel tank is empty resulting in an engine stall. The vehicle will enter into reduced performance mode and if the customer continues to drive the vehicle will continue to run for circa 8 miles/13Km. The vehicle engine will then cut out without warning. If the traction battery charge status is at least 10% or greater the electric motor will take up drive until such time as traction battery power is depleted. Where the traction battery charge status is below 10% drive from the electric motor is not possible and the vehicle will cut out whilst in motion. All 12 volt powered electrical functions such as power assisted steering exterior lighting and brake assistance will continue to operate as designed. Engine cut out with minimal warning to the driver may lead to an increased risk of an accident.

Fix: Fit a new revised fuel level sensor float to the vehicle.

1,000 vehicles · built 28 Mar 2017 to 25 May 2018

The air inlet door linkages to the Heating Ventilation and Air Conditioning may detach become detached and depending on operating mode position cause unexpected severe condensation/fogging of the interior windows. At temperatures below 0 degrees Celsius where the linkage detaches in recirculation mode it may not be able to clear condensation/fog from the inside of the front windscreen or other windows which can restrict the driver�s field of vision and could lead to an increased risk of an accident.

Fix: Recall the vehicles that are likely to be affected and download the latest software to the vehicle. Additionally the actuator arm will be replaced.

5,958 vehicles · built 12 Apr 2017 to 17 Nov 2017

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Fix: On affected vehicles replace the fuel rail with a correctly manufactured version.

1,537 vehicles · built 5 May 2016 to 31 Jan 2018

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Fix: On affected vehicles replace the fuel rail with a correctly manufactured version.

1,537 vehicles · built 5 May 2016 to 31 Jan 2018

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Fix: On affected vehicles replace the fuel rail with a correctly manufactured version.

1,537 vehicles · built 5 May 2016 to 31 Jan 2018

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Fix: On affected vehicles replace the fuel rail with a correctly manufactured version.

1,537 vehicles · built 5 May 2016 to 31 Jan 2018

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Fix: On affected vehicles replace the fuel rail with a correctly manufactured version.

1,537 vehicles · built 5 May 2016 to 31 Jan 2018

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Fix: On affected vehicles replace the fuel rail with a correctly manufactured version.

1,537 vehicles · built 5 May 2016 to 31 Jan 2018

Due to a software issue the Instrument cluster may intermittently go blank.

Fix: Affected vehicles will be recalled to have the latest software installed/downloaded.

14,932 vehicles · built 4 Sep 2016 to 17 Aug 2017

Due to a software issue the Instrument cluster may intermittently go blank.

Fix: Affected vehicles will be recalled to have the latest software installed/downloaded.

14,932 vehicles · built 4 Sep 2016 to 17 Aug 2017

P053 campaigned vehicles - Brake Disc to Hub Bolts where the front brake pipe from caliper to the brake flexible hose is subsequently showing signs of a chafe condition in some instances it has been reported that a noise is present or the loss of brake fluid has occurred. If the brake pipe continues to chafe through sudden loss of brake fluid could be experienced. Brake fluid loss will illuminate a red warning triangle. Brake fluid loss will ultimately result in extended brake pedal travel combined with reduced braking performance in the corresponding brake circuit increasing stopping distances. Loss of one braking circuit could compromise vehicle stability and significantly increase the risk of an accident.

Fix: Recall the vehicles that are likely to be affected. Where recall campaign P053 is yet to be completed provide the P053 remedy and ensure that the specified clearances are achieved following completion of the P053 recall remedy. In the case of vehicles that have already had recall campaign P053 completed the dealer will ensure the correct clearances are achieved. If there are any signs of damage to the left hand right hand or both sides of the front brake pipe the damaged pipe will be replaced.

1,178 vehicles · built 24 Oct 2014 to 5 Jan 2015

The locking ring retaining the fuel delivery module into the fuel tank may not have been correctly assembled onto the fuel tank during the tank assembly process. The driver may smell an increase in fuel odour and in some circumstances with the vehicle static there could be liquid fuel underneath the rear of the vehicle which in the presence of an ignition source could lead to a fire. It is also possible for fuel to leak onto the road surface which in the case of diesel fuel can present a skid hazard to other road users increasing the risk of a crash.

Fix: Recall the vehicles that are likely to be affected and inspect the fuel pump module retaining ring ensuring it is tightened to the correct specification if required.

479 vehicles · built 2 Mar 2017 to 7 Mar 2017

The locking ring retaining the fuel delivery module into the fuel tank may not have been correctly assembled onto the fuel tank during the tank assembly process. The driver may smell an increase in fuel odour and in some circumstances with the vehicle static there could be liquid fuel underneath the rear of the vehicle which in the presence of an ignition source could lead to a fire. It is also possible for fuel to leak onto the road surface which in the case of diesel fuel can present a skid hazard to other road users increasing the risk of a crash.

Fix: Recall the vehicles that are likely to be affected and inspect the fuel pump module retaining ring ensuring it is tightened to the correct specification if required.

479 vehicles · built 2 Mar 2017 to 7 Mar 2017

The fuel return hose may leak. Increased fuel odour may be noticed and drivers may also observe liquid fuel puddles underneath the vehicle. It is possible that fuel may leak onto the road surface which can present a skid hazard to other road users increasing the risk of a crash. Should leaking fuel come into contact with a sufficiently hot surface in the engine bay there will be an increased risk of fire.

Fix: Recall the vehicles that are likely to be affected and replace the fuel return hose.

836 vehicles · built 15 Feb 2017 to 30 Mar 2017

The fuel return hose may leak. Increased fuel odour may be noticed and drivers may also observe liquid fuel puddles underneath the vehicle. It is possible that fuel may leak onto the road surface which can present a skid hazard to other road users increasing the risk of a crash. Should leaking fuel come into contact with a sufficiently hot surface in the engine bay there will be an increased risk of fire.

Fix: Recall the vehicles that are likely to be affected and replace the fuel return hose.

836 vehicles · built 15 Feb 2017 to 30 Mar 2017

The Emergency Locking Retractor in the front passenger safety belt assembly may not function correctly. The Emergency Locking Retractors are equipped with a vehicle-sensitive locking mechanism and a webbing-sensitive locking mechanism. The vehicle-sensitive locking mechanism may not lock as designed. In the event of a pre-crash brake event where the passenger airbag deploys front passenger seat forward facing child seat occupants may sustain more severe injuries.

Fix: Recall the vehicles that are likely to be affected and replace the left hand front seat belt assembly.

5,170 vehicles · built 12 Apr 2016 to 31 Oct 2016

The Emergency Locking Retractor in the front passenger safety belt assembly may not function correctly. The Emergency Locking Retractors are equipped with a vehicle-sensitive locking mechanism and a webbing-sensitive locking mechanism. The vehicle-sensitive locking mechanism may not lock as designed. In the event of a pre-crash brake event where the passenger airbag deploys front passenger seat forward facing child seat occupants may sustain more severe injuries.

Fix: Recall the vehicles that are likely to be affected and replace the left hand front seat belt assembly.

5,170 vehicles · built 12 Apr 2016 to 31 Oct 2016

The front passenger airbag may not function properly due to a deviation in generant mix ratio. In the event of a crash of sufficient severity the front passenger airbag may not deploy when required. Failure to deploy can lead to increased injuries to the passenger seat occupant.

Fix: Recall the vehicles that are likely to be affected and replace the front passenger airbag.

139 vehicles · built 20 Sep 2016 to 25 Oct 2016

The front passenger airbag may not function properly due to a deviation in generant mix ratio. In the event of a crash of sufficient severity the front passenger airbag may not deploy when required. Failure to deploy can lead to increased injuries to the passenger seat occupant.

Fix: Recall the vehicles that are likely to be affected and replace the front passenger airbag.

139 vehicles · built 20 Sep 2016 to 25 Oct 2016

It has been identified that the engine wiring harness of the 2.0ltr engined vehicles fitted with automatic transmission may have been incorrectly routed which may allow the wiring harness to contact the water charge air cooler bracket. Engine vibration can cause a chaffing condition where the outer sheathing of the cable can wear through and expose the wires of the engine harness. Depending on the orientation of the wires within the harness then damage to wires can result in electrical arcing and a short circuit. This condition can also result in the illumination of a warning light on the instrument panel loss of the electronic steering system engine cut out without warning melting of the cable sheathing and surrounding parts. Also in extreme circumstances it can cause an under-bonnet fire.

Fix: All affected vehicles will be recalled to inspect the clearance between the engine harness and water charge air cooler bracket. If the clearance is not to the correct specification the wiring harness will be repositioned and secured to ensure the specified clearance is achieved. If the engine harness shows signs of chafing the engine harness will be repaired re-positioned to ensure the correct specification.

4,964 vehicles · built 4 Jul 2016 to 10 Oct 2016

It has been identified that the engine wiring harness of the 2.0ltr engined vehicles fitted with automatic transmission may have been incorrectly routed which may allow the wiring harness to contact the water charge air cooler bracket. Engine vibration can cause a chaffing condition where the outer sheathing of the cable can wear through and expose the wires of the engine harness. Depending on the orientation of the wires within the harness then damage to wires can result in electrical arcing and a short circuit. This condition can also result in the illumination of a warning light on the instrument panel loss of the electronic steering system engine cut out without warning melting of the cable sheathing and surrounding parts. Also in extreme circumstances it can cause an under-bonnet fire.

Fix: All affected vehicles will be recalled to inspect the clearance between the engine harness and water charge air cooler bracket. If the clearance is not to the correct specification the wiring harness will be repositioned and secured to ensure the specified clearance is achieved. If the engine harness shows signs of chafing the engine harness will be repaired re-positioned to ensure the correct specification.

4,964 vehicles · built 4 Jul 2016 to 10 Oct 2016

It has been identified that clamp bolt of the front lower control arm to knuckle fixing may have been incorrectly torqued/tighten this can cause a premature fatigue failure and possible separation of the joint. The driver will receive a warning in the form of noise a ABS warning light on the vehicles instrument panel or the misalignment steering wheel. In addition this is an early life failure. However if the driver does not heed the warning signs then the control the vehicle can be effected which can lead to an increased risk of a crash.

Fix: Recall all affected vehicles to replace the affected front lower control arm to knuckle fixing and apply the correct torque. Some vehicles require recall remedy actions to one side only others to both sides of the vehicle.

343 vehicles · built 31 Mar 2016 to 25 Aug 2016

It has been identified by the air-bag manufacturer that the air-bag initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to non-deployment of the air-bag. Should a collision occur then there is an increased risk of injury to the passenger.

Fix: Recall all affected vehicles to replace the air-bag with a new quality assured component.

452 vehicles · built 12 Jul 2016 to 26 Oct 2016

It has been identified by the air-bag manufacturer that the air-bag initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to non-deployment of the air-bag. Should a collision occur then there is an increased risk of injury to the passenger.

Fix: Recall all affected vehicles to replace the air-bag with a new quality assured component.

452 vehicles · built 12 Jul 2016 to 26 Oct 2016

Vehicles included in safety recall R/2016/302 (P075) have received a modification which has subsequently been determined as not durable for the life of the vehicle. The engine harness may chafe on an engine bracket and cause engine malfunction. In extreme cases the engine may cut out.

Fix: On affected vehicles inspect harness and repair as necessary. Fit new bracket and secure harness.

9,261 vehicles · built 9 Jul 2015 to 16 Oct 2015

Vehicles included in safety recall R/2016/302 (P075) have received a modification which has subsequently been determined as not durable for the life of the vehicle. The engine harness may chafe on an engine bracket and cause engine malfunction. In extreme cases the engine may cut out.

Fix: On affected vehicles inspect harness and repair as necessary. Fit new bracket and secure harness.

9,261 vehicles · built 9 Jul 2015 to 16 Oct 2015

It has been identified that clamp bolt of the front lower control arm to knuckle fixing may have been incorrectly torqued/tighten this can cause a premature fatigue failure and possible separation of the joint. The driver will receive a warning in the form of noise a ABS warning light on the vehicles instrument panel or the misalignment steering wheel. In addition this is an early life failure. However if the driver does not heed the warning signs then the control the vehicle can be effected which can lead to an increased risk of a crash.

Fix: Recall all affected vehicles to replace the affected front lower control arm to knuckle fixing and apply the correct torque. Some vehicles require recall remedy actions to one side only others to both sides of the vehicle.

343 vehicles · built 31 Mar 2016 to 25 Aug 2016

It has been identified by the air-bag manufacturer that the air-bag initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to non-deployment of the air-bag. Should a collision occur then there is an increased risk of injury to the passenger.

Fix: Recall all affected vehicles to replace the air-bag with a new quality assured component.

452 vehicles · built 12 Jul 2016 to 26 Oct 2016

It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none activation of the pre-tensioner.

Fix: Recall all affected vehicles to check the pre-tentioner and if required replace it with a new quality assured component.

8,628 vehicles · built 12 Jul 2016 to 26 Oct 2016

It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none activation of the pre-tensioner.

Fix: Recall all affected vehicles to check the pre-tentioner and if required replace it with a new quality assured component.

8,628 vehicles · built 12 Jul 2016 to 26 Oct 2016

It has been identified by the air-bag manufacturer that the air-bag initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to non-deployment of the air-bag. Should a collision occur then there is an increased risk of injury to the passenger.

Fix: Recall all affected vehicles to replace the air-bag with a new quality assured component.

452 vehicles · built 12 Jul 2016 to 26 Oct 2016

It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none activation of the pre-tensioner.

Fix: Recall all affected vehicles to check the pre-tentioner and if required replace it with a new quality assured component.

8,628 vehicles · built 12 Jul 2016 to 26 Oct 2016

The under bonnet fuel hoses routed on top of the engine may chafe against a plastic moulded noise suppressing material retaining posts on the underside of the engine top cover. The fuel hoses can over time chafe through the protective sleeve and fuel hose. Should the fuel hose wear through there will be an increased diesel fuel odour due to diesel fuel leaking. If this warning is ignored diesel fuel may leak onto the exhaust manifold (potential fire hazard) or onto the road surface (potential skid hazard).

Fix: Recall the vehicles that are likely to be affected and ensure the securing washers are pushed fully home. Additionally remove 8mm from the plastic moulded retaining posts. The tape wrapped around the fuel hose protective sleeve and the fuel hose will be visually inspected and replaced if there are signs of damage.

37,059 vehicles · built 5 Mar 2015 to 22 Apr 2016

The under bonnet fuel hoses routed on top of the engine may chafe against a plastic moulded noise suppressing material retaining posts on the underside of the engine top cover. The fuel hoses can over time chafe through the protective sleeve and fuel hose. Should the fuel hose wear through there will be an increased diesel fuel odour due to diesel fuel leaking. If this warning is ignored diesel fuel may leak onto the exhaust manifold (potential fire hazard) or onto the road surface (potential skid hazard).

Fix: Recall the vehicles that are likely to be affected and ensure the securing washers are pushed fully home. Additionally remove 8mm from the plastic moulded retaining posts. The tape wrapped around the fuel hose protective sleeve and the fuel hose will be visually inspected and replaced if there are signs of damage.

37,059 vehicles · built 5 Mar 2015 to 22 Apr 2016

An incorrectly manufactured crank position sensor may cause the engine to unexpectedly cut out or not to start.

Fix: On recalled vehicles the engine serial number will be checked and if within the affected range the crank position sensor will be replaced.

11,290 vehicles · built 2 Apr 2012 to 2 May 2013

An incorrectly manufactured crank position sensor may cause the engine to unexpectedly cut out or not to start.

Fix: On recalled vehicles the engine serial number will be checked and if within the affected range the crank position sensor will be replaced.

11,290 vehicles · built 2 Apr 2012 to 2 May 2013

An incorrectly manufactured crank position sensor may cause the engine to unexpectedly cut out or not to start.

Fix: On recalled vehicles the engine serial number will be checked and if within the affected range the crank position sensor will be replaced.

11,290 vehicles · built 2 Apr 2013 to 2 May 2014

Due to a nonconformity of production the driver's air bag may not deploy correctly and may not provide protection as intended.

Fix: On affected vehicles replace driver's air bag

81 vehicles · built 3 May 2016 to 10 May 2016

The software for the RSC is not to the correct specification and is unable to detect and mitigate a potential vehicle roll over condition. All other Stability Control Systems including Dynamic Stability Control (DSC) continue to function correctly.

Fix: Recall the vehicles that are likely to be affected and update the vehicle with the latest software.

9 vehicles · built 21 Aug 2014 to 11 Jan 2016

A rework where bonded glass was removed and refitted may have used an incorrect combination of adhesive preparation chemicals and glass adhesive.

Fix: Owner will be instructed to take vehicle to a Land Rover dealer who will remove the affected glazing panels and re-assemble using the correct specification bonding agents.

1 vehicles · built 9 Dec 2014 to 9 Dec 2014

An engine harness may not have been routed correctly during assembly. This may chafe and cause engine malfunction. In extreme cases the engine may cut out.

Fix: On affected vehicles inspect harness and repair as necessary. Fit new bracket and secure harness.

9,252 vehicles · built 9 Jul 2015 to 16 Oct 2015

An engine harness may not have been routed correctly during assembly. This may chafe and cause engine malfunction. In extreme cases the engine may cut out.

Fix: On affected vehicles inspect harness and repair as necessary. Fit new bracket and secure harness.

9,252 vehicles · built 9 Jul 2015 to 16 Oct 2015

The second row seat backrest on vehicles with the manual recline second row seat system may not latch robustly in position. It is possible the seat belt may not correctly restrain the occupant in the event of a collision.

Fix: On affected vehicles inspect the second row seat mechanism and if necessary fit the correct specification components.

152 vehicles · built 1 Jun 2015 to 12 Jun 2015

The second row seat backrest on vehicles with the manual recline second row seat system may not latch robustly in position. It is possible the seat belt may not correctly restrain the occupant in the event of a collision.

Fix: On affected vehicles inspect the second row seat mechanism and if necessary fit the correct specification components.

152 vehicles · built 1 Jun 2015 to 12 Jun 2015

The controller circuit for the Positive Temperature Coefficient (PTC) Heater fitted to affected vehicles may short circuit. This normally results in flat battery but may also cause non starting Additionally the short circuit may cause a distinct smell from hot and/or melted components which in extreme circumstances may develop in to a fire. All of these symptoms can occur when the vehicle is in use or parked and unattended.

Fix: On affected vehicles replace PTC with latest design version.

429 vehicles · built 19 May 2008 to 2 Jun 2008

The door could be unlatched when in the closed position and no indication provided of an unlatched condition. Vehicle doors not latched in either the primary of secondary state may during driving open. This can increase the risk of a vehicle crash and/or compromise the safety of vehicle occupants and other road users.

Fix: Recall the vehicles that are likely to be affected and download the latest level of software. A limited number of vehicles may also require a Remote Function Actuator module to be fitted.

35,250 vehicles · built 28 Nov 2012 to 19 Mar 2015

The door could be unlatched when in the closed position and no indication provided of an unlatched condition. Vehicle doors not latched in either the primary of secondary state may during driving open. This can increase the risk of a vehicle crash and/or compromise the safety of vehicle occupants and other road users.

Fix: Recall the vehicles that are likely to be affected and download the latest level of software. A limited number of vehicles may also require a Remote Function Actuator module to be fitted.

35,250 vehicles · built 29 Mar 2012 to 23 May 2015

The panoramic roof adhesive and primer used in the assembly bonding of the panoramic roof glass panel may not have been to the correct specification. If the concern occurs there will initially be wind noise when driving or parked and on closing a door the panoramic roof might be seen to lift. If the concern is not rectified the panoramic roof could detach from the vehicle when it is in motion causing risk of collision/injury to other road users.

Fix: Recall the vehicles that are likely to be affected and apply the correct primer and adhesive to the panoramic roof assembly.

833 vehicles · built 13 Aug 2012 to 14 Sep 2012

As a result of the ABS system self check software not being installed correctly�Yaw Stability Control (YSC) Electronic Traction Control (ETC) and Gradient Release Control�systems may become disabled. The air suspension goes into �Safe Mode� lowering to its lowest setting. An Amber warning indicator illuminates warning the driver.

Fix: Recall the vehicles that are likely to be affected and download the latest level of software.

6,412 vehicles · built 19 Aug 2014 to 24 Mar 2015

On affected vehicles the road wheel nuts may not have been manufactured to the correct specification. These wheel nuts may crackwhen subject to shock loads and detach from the stud. This may lead to insecurity and possible detachment of a road wheel.

Fix: Recall affected vehicles and replace wheel nuts. Locking wheel nuts are not affected.

926 vehicles · built 6 Jan 2015 to 23 Jan 2015

On affected vehicles the road wheel nuts may not have been manufactured to the correct specification. These wheel nuts may crackwhen subject to shock loads and detach from the stud. This may lead to insecurity and possible detachment of a road wheel.

Fix: Recall affected vehicles and replace wheel nuts. Locking wheel nuts are not affected.

926 vehicles · built 6 Jan 2015 to 23 Jan 2015

On affected vehicles the road wheel nuts may not have been manufactured to the correct specification. These wheel nuts may crackwhen subject to shock loads and detach from the stud. This may lead to insecurity and possible detachment of a road wheel.

Fix: Recall affected vehicles and replace wheel nuts. Locking wheel nuts are not affected.

926 vehicles · built 6 Jan 2015 to 23 Jan 2015

The ground wiring for the air conditioning blower within the cockpit harness may not be to specification. This can lead to the wire getting hot and melting the plastic insulation and associated burning smell. If ignored and the loom gets significantly damaged there is a possibility of fire.

Fix: Recall the vehicles that are likely to be affected and replace the earth wire. Where other wiring/insulation is affected necessary repairs will be carried out using the correct repair procedures.

4,860 vehicles · built 14 Oct 2014 to 2 Feb 2015

The ground wiring for the air conditioning blower within the cockpit harness may not be to specification. This can lead to the wire getting hot and melting the plastic insulation and associated burning smell. If ignored and the loom gets significantly damaged there is a possibility of fire.

Fix: Recall the vehicles that are likely to be affected and replace the earth wire. Where other wiring/insulation is affected necessary repairs will be carried out using the correct repair procedures.

4,860 vehicles · built 14 Oct 2014 to 2 Feb 2015

On affected vehicles the servo vacuum hose may have been incorrectly routed and can chafe against the auxiliary drive pulley. This can lead to failure of the hose and a loss of brake servo assistance.

Fix: On affected vehicles check brake servo hose. If in good condition correctly reroute and secure hose. If hose is damaged replace hose and correctly route and secure.

1,575 vehicles · built 7 May 2013 to 8 Jan 2014

On affected vehicles the servo vacuum hose may have been incorrectly routed and can chafe against the auxiliary drive pulley. This can lead to failure of the hose and a loss of brake servo assistance.

Fix: On affected vehicles check brake servo hose. If in good condition correctly reroute and secure hose. If hose is damaged replace hose and correctly route and secure.

1,575 vehicles · built 16 Aug 2012 to 8 Jan 2014

On affected vehicles the servo vacuum hose may have been incorrectly routed and can chafe against the auxiliary drive pulley. This can lead to failure of the hose and a loss of brake servo assistance.

Fix: On affected vehicles check brake servo hose. If in good condition correctly reroute and secure hose. If hose is damaged replace hose and correctly route and secure.

1,575 vehicles · built 18 Aug 2014 to 12 Feb 2015

The fixing bolts for the front and rear hub assemblies are not to specification. The bolts could break and cause loud noise followed by severe vibration wheel lock possibly a bolt could puncture the brake disc or even if all the bolts are damaged the hub may become insecure to the axle. The aforementioned will cause instability and significantly increase the risk of collision.

Fix: Recall the vehicles that are likely to be affected and replace all the front and rear wheel hub fixings. If any damaged has been caused by bolts failing the affected components will be replaced.

1,166 vehicles · built 4 Dec 2014 to 6 Jan 2015

The fixing bolts for the front and rear hub assemblies are not to specification. The bolts could break and cause loud noise followed by severe vibration wheel lock possibly a bolt could puncture the brake disc or even if all the bolts are damaged the hub may become insecure to the axle. The aforementioned will cause instability and significantly increase the risk of collision.

Fix: Recall the vehicles that are likely to be affected and replace all the front and rear wheel hub fixings. If any damaged has been caused by bolts failing the affected components will be replaced.

1,166 vehicles · built 24 Oct 2014 to 4 Dec 2014

It is possible that one or both of the front brake hoses could rupture allowing brake fluid to leak. A warning lamp and message will appear on the dash board when the fluid depletes to a certain level. Braking capability will be retained by the rear brake circuit pedal feel will be degraded and pedal travel extended. Stopping distances will increase.

Fix: Recall the vehicles that are likely to be affected and replace both front brake hoses.

34,134 vehicles · built 14 Mar 2005 to 26 Jul 2012

It has been established that in extreme cases the front axle tube could fracture over a period of time. If not identified this could result in the detachment of the wheel and hub assembly.

Fix: Recall all affected vehicles and fit additional brackets to hold the hub/tube assembly in place should the tube fracture.

2,666 vehicles · built 1 Sep 2010 to 5 Jul 2011

An internal fault can create a short circuit within the fan control module which may lead to overheating of the insulation and ultimately fire within the engine bay. This may happen with the engine switched off and possibly when the vehicle is unattended..

Fix: Replace electric cooling fan assembly on affected vehicles

1,331 vehicles · built 26 Nov 2012 to 23 Jan 2013

An internal fault can create a short circuit within the fan control module which may lead to overheating of the insulation and ultimately fire within the engine bay. This may happen with the engine switched off and possibly when the vehicle is unattended..

Fix: Replace electric cooling fan assembly on affected vehicles

1,331 vehicles · built 9 Mar 2012 to 22 Jan 2013

The right hand rear suspension link arm to knuckle fixings may not be to specification. When subjected to normal use loading one or both of the fixings may fracture. Where one or both of the suspension link arm fixings fracture vehicle stability may be compromised.

Fix: Recall the vehicles that are likely to be affected and replace both the right hand side rear suspension link arm to knuckle fixings and torque to the correct specification.

9 vehicles · built 1 Nov 2013 to 10 Jan 2014

The right hand rear suspension link arm to knuckle fixings may not be to specification. When subjected to normal use loading one or both of the fixings may fracture. Where one or both of the suspension link arm fixings fracture vehicle stability may be compromised.

Fix: Recall the vehicles that are likely to be affected and replace both the right hand side rear suspension link arm to knuckle fixings and torque to the correct specification.

9 vehicles · built 2 Nov 2013 to 10 Jan 2014

In the event of a front direction indictor lamp failure the audible and visual warning (double click/double flash warning) will not function thereby not informing the driver of the failure. This can result in the vehicle not being rectified for a prolonged period which increases the chance of a collision with other road users.

Fix: Recall the vehicles that are likely to be affected and update the vehicle with the latest software.

1,886 vehicles · built 7 May 2013 to 10 Oct 2013

For vehicles fitted with Dynamic Response System (DRS) it is possible that the positive battery cable could come in contact with the DRS fluid supply pipes. If this condition occurs the positive battery lead could chaff on the DRS pipe which will then lead to DRS pipes becoming positively charged. Should the charge find an earth then localised melting of components could occur due to heat generation. This could ultimately result in a vehicle fire.

Fix: Recall all affected vehicles to check and if necessary replace the positive battery cable then reroute the cable.

1,772 vehicles · built 6 Mar 2013 to 15 Oct 2013

It is possible that a leak can occur between the injector spill rail connection and the plastic fuel return pipe. This can cause leakage of fuel which can either pool on the engine cylinder head and then become deposited onto the road surface where it could cause a skid risk to other motorist or if the fuel comes into contact with extremely hot engine components an exhaust manifold for instance it is possible that an under bonnet fire could ensue.

Fix: Recall all affected vehicles inspect the fuel spill rail/return pipe and if required replace the spill rail with a new modified rail.

49,104 vehicles · built 1 Jan 2012 to 30 Sep 2013

It is possible that a leak can occur between the injector spill rail connection and the plastic fuel return pipe. This can cause leakage of fuel which can either pool on the engine cylinder head and then become deposited onto the road surface where it could cause a skid risk to other motorist or if the fuel comes into contact with extremely hot engine components an exhaust manifold for instance it is possible that an under bonnet fire could ensue.

Fix: Recall all affected vehicles inspect the fuel spill rail/return pipe and if required replace the spill rail with a new modified rail.

49,104 vehicles · built 1 Jan 2012 to 31 Oct 2013

Mounting bolts for the rear brake caliper may not be torqued to the correct specification. This will create noise from the rear of the vehicle whilst it is being driven and during braking and should warn the driver of the issue. However if the vehicle continues to be driven it is possible the bolts can work loose thus allowing the brake caliper to detach. This will result in the caliper contacting the road wheel which can cause brake failure or sudden deflation of the tyre with subsequent loss of control of the vehicle.

Fix: Recall affected vehicles to check the mounting bolts and re-torque them.

51 vehicles · built 11 Jun 2012 to 11 Jun 2012

The steering rack mounting bolts may not be fully tight. If the steering gear fixings are below the required torque the driver will experience abnormal noise and feedback through the steering wheel during low speed manoeuvring and at higher speeds some easily corrected minor over steer. If the driver ignores the warning signs both fixings could become sufficiently loose to detach from the vehicle making directional control of the vehicle difficult.

Fix: Recall the vehicles that are likely to be affected to inspect the steering gear and check the steering gear mounting fixings are tightened to the correct torque.

182 vehicles · built 20 Aug 2012 to 18 Sep 2012

The affected vehicles windshield may not be fully bonded in to the aperture. Where the windshield is not bonded water ingress might occur and there may be reports of increased wind noise. Furthermore this concern may also be a non-compliance with the regulatory requirements of FMVSS 212 or FMVSS 216 Windshield Mounting.

Fix: Approved Service Centre will remove and replace the windscreen with the correct bonding agent in line with existing service repair procedures.

5 vehicles · built 24 Nov 2011 to 24 Nov 2011

Some seat belt mounting bracket bolt/studs may be out of specification as they may have suffered Hydrogen Embrittlement during production. Occupants will normally notice the failure by the looseness or detachment of seat belt brackets. If the issue is not rectified occupants may not be restrained in their seat if the vehicle is involved in a collision.

Fix: Recall affected vehicles and replace the seat belt mounting brackets.

6,136 vehicles · built 1 Feb 2010 to 31 Jan 2012

It has been identified that a genuine replacement rear propeller shaft coupling could fail which could result in the propeller shaft detaching from the vehicle whilst in motion.

Fix: Recall all affected parts and replace with a new quality component.

40 vehicles · built 1 Apr 2011 to 29 Feb 2012

It is possible that the transfer box output shaft may not be to specification. This can allow oil to leak between the output shaft and the drive flange. This can result in oil entering the parking brake drum and contaminating the brake linings which can affect the parking brake efficiency.

Fix: Recall all affected vehicles for the cleaning and resealing of the drive flange to output shaft plus the replacement of any contaminated brake linings.

23,175 vehicles · built 5 Oct 2007 to 4 Nov 2010

The front pump bearing on some aftermarket replacement High Pressure Fuel Pumps may fail due to lack of sufficient lubrication. This will cause failure of the shaft seal which will cause a fuel leak and if not rectified could cause a vehicle fire.

Fix: Recall affected vehicles and replace fuel pump with the latest specification pump.

255 vehicles · built 1 Jan 2006 to 30 Jun 2009

The front pump bearing on some aftermarket replacement High Pressure Fuel Pumps may fail due to lack of sufficient lubrication. This will cause failure of the shaft seal which will cause a fuel leak and if not rectified could cause a vehicle fire.

Fix: Recall affected vehicles and replace fuel pump with the latest specification pump.

255 vehicles · built 1 Sep 2006 to 30 Jun 2009

Parking brake efficiency can be impaired as a result of an incorrectly assembled oil seal at the transfer box output shaft allowing oil to contaminate the brake linings.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary fit a new oil seal degrease the back plate and drum and replace the brake linings.

5,003 vehicles · built 7 Jun 2007 to 13 Feb 2008

It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.

Fix: All recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

77,262 vehicles · built 20 Oct 2004 to 26 Jun 2009

Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.

Fix: Recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

14,330 vehicles · built 1 Mar 2007 to 30 Jun 2007

Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.

Fix: Recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

14,330 vehicles · built 1 Sep 2007 to 31 Jan 2008

Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.

Fix: Recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

14,330 vehicles · built 1 Sep 2006 to 30 Nov 2006

It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.

Fix: All recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

77,262 vehicles · built 31 Oct 2005 to 10 Jan 2007

Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.

Fix: Recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

14,330 vehicles · built 1 Mar 2007 to 30 Jun 2007

Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.

Fix: Recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

14,330 vehicles · built 1 Sep 2006 to 30 Nov 2006

Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.

Fix: Recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

14,330 vehicles · built 1 Sep 2007 to 31 Jan 2008

It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.

Fix: All recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

77,262 vehicles · built 10 Jan 2007 to 26 Jun 2009

It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.

Fix: All recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

77,262 vehicles · built 27 Jan 2003 to 26 Jun 2009

It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.

Fix: All recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

77,262 vehicles · built 31 Oct 2005 to 26 Jun 2009

The windscreen bonding process to vehicle may not be effective. Water and wind ingress may occur. In extreme cases in an air bag deployment or collision the windscreen may detach.

Fix: Recall affected vehicles to check for presence of primer/activator on REAR tailgate glass. If present no further action is required as all screen security is assured. If not present the FRONT windscreen will be removed and re-fitted in-line with exiting service repair procedures.

77 vehicles · built 1 Apr 2009 to 31 May 2009

A short circuit may occur in the PTC heater which could result in the battery discharging a smell from hot/melted components or in the worst case fire.

Fix: Recall the vehicles that are likely to be affected to replace the PTC heater and condensation drain tube with the latest specification components.

28,924 vehicles · built 1 Feb 2007 to 23 May 2008

It has been identified that the controller circuit of the Positive Temperature Coefficient (PTC) the supplementary cabin heater may short circuit. This normally results in draining of the battery and a non start situation.Additionally the short circuit may lead to a distinct smell from hot/melted components which in extreme circumstances may develop into a fire. It is noted that all of the above symptoms can occur when the vehicle is in use or parked unattended.

Fix: Authorised repairers will disable the PTC operation until such time as replacement parts of the latest specification become available.

28,871 vehicles · built 1 Feb 2007 to 23 May 2008

Failure of either the left or right side guide rail could cause the sun roof to become detached from its operating mechanism and bind. In certain circumstances the glass panel can become detached.

Fix: Recall the vehicles that are likely to be affected to install retention inserts to both sides of the glass panel guide rails.

11,169 vehicles · built 1 Nov 2006 to 12 Jan 2008

It has been identified that on vehicles fitted with fuel tanks which incorporate an internal breather pipe the breather pipe may not be to specification. This may result in swelling and cracking of a grommet and detachment of the breather pipe from a connector tube. In this condition fuel may enter the breather pipe resulting in MIL illumination fuel odour and drivability concerns such as hesitation misfiring stalling rough running or difficult starting. In the worst case fuel may be discharged onto the ground.

Fix: Recalled vehicles will have the fuel tank replaced.

103 vehicles · built 3 May 2005 to 28 Sep 2005

Brake fluid may leak from either the right hand front or left hand front brake caliper bridge pipe

Fix: Recall affected vehicles and replace the caliper bridge pipe on all four calipers with a revised corrosion resistant part.

23 vehicles · built 4 Jul 2002 to 3 Oct 2006

It is possible for the wheel balance weights to foul the left front brake hose and/or the ABS wheel speed sensor and/or the brake pad wear warning sensor.

Fix: Recall the vehicles that are likely to be affected to fit stick on wheel balance weights in place of the clamp on weights. A handbook supplement will also be produced stating the requirement for stick on weights.

6,226 vehicles · built 1 Jan 2005 to 13 Feb 2006

It has been identified that on vehicles fitted with fuel tanks which incorporate an internal breather pipe the breather pipe may not be to specification. This may result in swelling and cracking of a grommet and detachment of the breather pipe from a connector tube. In this condition fuel may enter the breather pipe resulting in MIL illumination fuel odour and drivability concerns such as hesitation misfiring stalling rough running or difficult starting. In the worst case fuel may be discharged onto the ground.

Fix: Recall affected vehicles and replace the fuel tank.

590 vehicles · built 2 Jul 2004 to 30 Apr 2005

Due to the presence of an out of specification component within the automatic gearbox parking brake interlock system. The parking function may not fully engage when the operating lever is moved to park despite all indicators showing that park has been achieved. If the parking brake is not applied the vehicle may roll away.

Fix: Recalled vehicles will have the out of specification component replaced with a quality assured item.

917 vehicles · built 16 Aug 2005 to 15 Sep 2005

Some vehicles may have been manufactured with a seat belt buckle mounting with a tensile strength below the required standard. If in the event of an accident where the rear left second row seat belt was being used the buckle may not be fully retained.

Fix: Recall the affected vehicles inspect and replace seat belt buckle where required.

277 vehicles · built 23 Aug 2005 to 12 Sep 2005

Due to the presence of an out of specification component within the automatic gearbox parking brake interlock system. The parking function may not fully engage when the operating lever is moved to park despite all indicators showing that park has been achieved. If the parking brake is not applied the vehicle may roll away.

Fix: Recalled vehicles will have the out of specification component replaced with a quality assured item.

917 vehicles · built 16 Aug 2005 to 15 Sep 2005

Due to the presence of an out of specification component within the automatic gearbox parking brake interlock system. The parking function may not fully engage when the operating lever is moved to park despite all indicators showing that park has been achieved. If the parking brake is not applied the vehicle may roll away.

Fix: Recalled vehicles will have the out of specification component replaced with a quality assured item.

917 vehicles · built 16 Aug 2005 to 15 Sep 2005

Some vehicles may have been manufactured with a seat belt buckle mounting with a tensile strength below the required standard. If in the event of an accident where the rear left second row seat belt was being used the buckle may not be fully retained.

Fix: Recall the affected vehicles inspect and replace seat belt buckle where required.

277 vehicles · built 23 Aug 2005 to 12 Sep 2005

Vehicles manufactured with Coil Suspension were incorrectly equipped with a scissor jack rather than the required screw/bottle jack. An unladen vehicle may become unstable if lifted

Fix: Recall affected vehicles and replace jack if incorrect type is found.

304 vehicles

Should the outer door handle of the left hand rear door be operated whilst the child lock is engaged this may permit the door to be opened by operation of the interior handle.

Fix: Recalled vehicles will have the suspect locks inspected and replaced if found to be defective.

9,834 vehicles · built 1 Nov 2000 to 30 Apr 2005

Due to a material specification change combined with inadequate tool design and process control it is possible that stress cracking can occur at either the fuel tank vent valve ring welding the breather pipe weld or the filler pipe stub.

Fix: Replace the fuel tank with an improved design.

21,191 vehicles · built 15 Apr 1993 to 7 Sep 1998

Due to a material specification change combined with inadequate tool design and process control it is possible that stress cracking can occur at either the fuel tank vent valve ring welding the breather pipe weld or the filler pipe stub.

Fix: Replace the fuel tank with an improved design.

21,191 vehicles · built 19 Apr 1993 to 19 Feb 1996

It has been identified that the TV will be viewable by the driver whilst the vehicle is in motion if the TV is being operated in the full screen position when the vehicle is stationary and a call through the in car phone system is either made or received and not ended prior to the vehicle being set in motion.

Fix: Recalled vehicles will have the high level front display unit reprogrammed with a revised level of software thus ensuring that the TV screen is switched off whilst the vehicle is in motion.

891 vehicles · built 24 Aug 2004 to 15 Nov 2004

M12 weld nuts has been incorrectly installed by a body panel supplier into the rear subframe mountings instead of the correct M14 weld nuts. A bolt that locates the frame to the body did not fit into this nut and was not installed at the vehicle assembly plant. Lack of this bolt could eventually cause the subframe to crack and become deformed. A deformed subframe could potentially lead to instability of the vehicle.

Fix: Recall the vehicles that may be affected and inspect the subframe fixing for fitment and correct clamping. If an incorrect subframe fixing is identified the subframe will be removed and the body panel will be repaired with a new weld nut.

129 vehicles · built 12 Aug 2003 to 29 Aug 2003

On certain vehicles equipped with a dynamic stability control the yaw rate sensor may have suffered internal delamination. This could result in actuation of the stability control incorrectly resulting in uneven and unexpected application of the brakes.

Fix: Recalled vehicles will be inspected in order to ascertain whether they contain a suspect sensor. Should this indeed be the case the sensor will be replaced with a quality assured part.

49 vehicles · built 22 Jun 2004 to 9 Jul 2004

The deflector panel contained in the passenger side air-bag module may not have been manufactured to the correct specification. This may result in unsatisfactory performance of the deflector panel's structural integrity during air bag deployment. This could result in damage of the air bag that could allow the release of a fragment of the deflector panel into the passenger compartment.

Fix: Recall the affected vehicles and replace the defective component with a quality assured one.

610 vehicles · built 26 Aug 2004 to 1 Oct 2004

It has been identified that if the left hand rear door is repeatedly operated with the child lock engaged disengagement of the lock can occur. This will allow the door to be opened from the inside when it is believed to be locked. This is due to the incorrect setting of the hot melt riveting machine.

Fix: Recall all the affected vehicles and replace the left hand rear door lock with a quality assured component.

3,090 vehicles · built 15 Jul 2002 to 27 Sep 2002

Rear fuel line may chafe with ABS/ Water sensor and fuel pump harnesses with the possibility that a fuel leak may develop

Fix: Remove original convolute tubing and replace with smooth PVC tape. Additionally change fuel line and re-route the wiring harness to run to the side of the fuel lines.

33,491 vehicles · built 30 Jun 2001 to 19 Apr 2004

A potential fluid leak from the brake modulator may result in a reduction in the efficiency of the service brake or in the worst case complete failure of the service brake system.

Fix: Recall all potentially affected vehicles and fit stronger valve covers to the brake modulator.

59,616 vehicles · built 1 Oct 1998 to 1 Dec 2003

The active cornering enhancement system pump banjo bolt may loosen and allow fluid to leak past the joint. Resultant oil contamination of the engine compartment may lead to an underbonnet fire.

Fix: Check the pump banjo union for leaks and tighten the union bolt to the specified torque where necessary.

24,547 vehicles · built 29 Jan 2000 to 30 Sep 2003

The throttle spindle within the throttle body may stick in the open position when the accelerator pedal is released.

Fix: Recall affected vehicles and fit a quality assured throttle body.

168 vehicles · built 27 Jan 2003 to 26 Mar 2003

A potential fluid leak from the brake modulator may result in a reduction in the efficiency of the service brake or in the worst case complete failure of the service brake system.

Fix: Recall all potentially affected vehicles and fit stronger valve covers to the brake modulator.

59,616 vehicles · built 1 Oct 1998 to 1 Dec 2003

Throttle may stick in the open position

Fix: Recall affected vehicles and replace throttle bodies with quality assured unit.

87 vehicles · built 11 Feb 2003 to 26 Mar 2003

When some scan tools are connected to the diagnostic connector on the vehicle they expect to see a vehicle ground on pin 5 of the diagnostic connector. Pin 5 of the diagnostic connector has no wire in place to supply a ground point. It is a legal requirement in NAS and for EOBD certified vehicles in the EU to have a vehicle ground in pin 5.

Fix: Recall affected vehicles and fit a pin to position 5 on the diagnostic connector and splice to the existing earth point.

22,624 vehicles · built 7 Jul 2000 to 18 Mar 2002

Land Rover has received a small number of reports that detail a potential abrasion condition between the front left hand flexible brake hose and tyre. In extreme circumstances dependant upon the position of the hose the front left hand tyre can contact the hose and cause abrasion to the outer lining material which could result in a brake fluid leak.

Fix: Recall all affected vehicles to check the clearance between the hose and tyre where abrasion or limited clearance is found the hose must be replaced.

14,727 vehicles

Under certain parking conditions the handbrake lever travel may operate inconsistantly. This could result in the handbrake failing to hold the vehicle effectively when parked on a slope.

Fix: Recall and examine the affected vehicles and modify the mechanism within the brake drums where necessary.

23,652 vehicles · built 10 Jul 1998 to 18 Feb 2002

Under certain parking conditions the handbrake lever travel may operate inconsistantly. This could result in the handbrake failing to hold the vehicle effectively when parked on a slope.

Fix: Recall and examine the affected vehicles and modify the mechanism within the brake drums where necessary.

23,652 vehicles · built 10 Jul 1998 to 18 Feb 2002

The throttle cable may have been damaged during vehicle manufacture. This could cause the cable to fray and prevent the engine speed returning to idle when the throttle pedal is released.

Fix: Check the throttle cable for damage and replace where necessary.

2,894 vehicles · built 10 Jul 1998 to 21 Jan 2002

The throttle cable may have been damaged during vehicle manufacture. This could cause the cable to fray and prevent the engine speed returning to idle when the throttle pedal is released.

Fix: Check the throttle cable for damage and replace where necessary.

2,894 vehicles · built 10 Jul 1998 to 21 Jan 2002

There is a possibility that a short circuit may occur in the cigar lighter bulb holder when the vehicle lighting system is operated.

Fix: Disconnect the illumination feed to the lighter and remove the bulb.

1,097 vehicles · built 1 Dec 2001 to 31 Mar 2002

The front seats may not latch positively following operation of the seat tip lever. In consequence the seat squab (backrest) could attempt to fold forward if the vehicle should be brought to a very rapid stop.

Fix: Affected vehicles will be recalled for examination of the operation and integrity of the front seat tip lever and latching mechanism. In cases where the mechanism is found to bind a new seat frame assembly will be fitted.

4,368 vehicles · built 1 Aug 2000 to 28 Feb 2001

The front seats may not latch positively following operation of the seat tip lever. In consequence the seat squab (backrest) could attempt to fold forward if the vehicle should be brought to a very rapid stop.

Fix: Affected vehicles will be recalled for examination of the operation and integrity of the front seat tip lever and latching mechanism. In cases where the mechanism is found to bind a new seat frame assembly will be fitted.

4,368 vehicles · built 1 Aug 2000 to 28 Feb 2001

There is a possibility of premature failure of the cooling system hoses and throttle body heater gasket. Expelled coolant allowed to remain on hot engine components can result in the evaporation of the water content and leave an artificially high concentration level of anti - freeze which is in extreme circumstances both corrosive and inflammable.

Fix: Recall affected vehicles to replace cooling system hoses / throttle body heater gasket with quality assured parts.

17,603 vehicles · built 1 Jan 1994 to 31 Dec 1999

As a consequence of the manufacturing process the engine flywheel may develop surface cracks which under certain high load conditions can propagate resulting in disintegration of the flywheel.

Fix: Recall affected vehicles for the fitment of quality assured parts.

12,965 vehicles · built 1 Sep 1998 to 30 Jun 1999

As a consequence of the manufacturing process the engine flywheel may develop surface cracks which under certain high load conditions can propagate resulting in disintegration of the flywheel.

Fix: Recall affected vehicles for the fitment of quality assured parts.

12,965 vehicles · built 1 Sep 1998 to 30 Jun 1999

As a consequence of the manufacturing process the engine flywheel may develop surface cracks which under certain high load conditions can propagate resulting in disintegration of the flywheel.

Fix: Recall affected vehicles for the fitment of quality assured parts.

12,965 vehicles · built 1 Sep 1998 to 30 Jun 1999

The ACE system high pressure pipes may under certain conditions fracture and leak fluid. In extreme circumstances should the vehicle continue to be driven and sufficient fluid expelled into the engine bay and an ignition source is present the fluid could ignite.

Fix: Recall affected vehicles and replace ACE high pressure pipes.

2,289 vehicles · built 13 Jul 1999 to 13 Dec 1999

Land Rover have identified a concern associated with the Anti-Lock Braking (ABS) system. This may give the feeling of the vehicle Self-braking under normal driving conditions following normal brake pedal application caused by the contacts within the ABS relay sticking. Should this occur a very slight retardation may be felt within the vehicle until the contacts within the ABS relay are released.

Fix: Recall affected vehicles and replace the ABS relay with a quality assured unit.

9,296 vehicles · built 10 Jul 1998 to 8 Jun 1999

Land Rover have identified a concern associated with the Anti-Lock Braking (ABS) system. This may give the feeling of the vehicle Self-braking under normal driving conditions following normal brake pedal application caused by the contacts within the ABS relay sticking. Should this occur a very slight retardation may be felt within the vehicle until the contacts within the ABS relay are released.

Fix: Recall affected vehicles and replace the ABS relay with a quality assured unit.

9,296 vehicles · built 10 Jul 1998 to 8 Jun 1999

Land Rover have identified a weld integrity concern associated with the rear suspension links on Freelander models. Should the weld fracture the stability of the rear hub assembly could be impaired. This may cause the vehicle to deviate from a straight line under normal driving conditions. To protect the long term integrity of these components Land Rover are implementing recall action on all Freelander models within the affected VIN range.

Fix: Recall affected vehicles and replace the rear suspension links with quality assured units.

10,477 vehicles · built 1 Jun 1997 to 1 Jun 1998

Involuntary operation of the air bag may occur as a result of an intermittent electrical fault.

Fix: Recall the affected vehicles for the fitment of a safety fuse link in the air bag circuit.

15,175 vehicles · built 1 Jan 1994 to 31 Mar 1997

Involuntary operation of the air bag may occur as a result of an intermittent electrical fault.

Fix: Recall the affected vehicles for the fitment of a safety fuse link in the air bag circuit.

15,175 vehicles · built 1 Jan 1994 to 31 Mar 1997

Involuntary operation of the air bag may occur as a result of an intermittent electrical fault.

Fix: Recall the affected vehicles for the fitment of a safety fuse link in the air bag circuit.

15,175 vehicles · built 1 Jan 1994 to 31 Mar 1997

Under certain circumstances it is possible that the front right hand door may not latch properly.

Fix: The affected vehicles are being recalled to have the operation of the front right hand door checked. In all cases a modified screw will be fitted to the lock to eliminate the concern but where the check indicates that the latch may be binding

22,723 vehicles · built 14 Apr 1995 to 23 Jul 1996

Under certain circumstances it is possible that the front right hand door may not latch properly.

Fix: The affected vehicles are being recalled to have the operation of the front right hand door checked. In all cases a modified screw will be fitted to the lock to eliminate the concern but where the check indicates that the latch may be binding

22,723 vehicles · built 14 Apr 1995 to 23 Jul 1996

The rear suspension composite links are below specification and may develop small stress cracks at the aluminium eye end. Failure of the link(s) would affect the security of the rear axle.

Fix: Recall the affected vehicles for replacement of the suspension links with quality assured examples.

2,805 vehicles · built 1 Jun 1994 to 31 Mar 1995

The seat belt fixings may be loose at the frames on both front seats. Should these fixings come adrift the effectiveness of the seat belt will be reduced in the event of an accident.

Fix: Recall the affected vehicles and check the torque of the belt fixing retaining bolts on both front seats retorqueing if required.

5,599 vehicles · built 1 Jun 1995 to 31 Aug 1995

The seat belt fixings may be loose at the frames on both front seats. Should these fixings come adrift the effectiveness of the seat belt will be reduced in the event of an accident.

Fix: Recall the affected vehicles and check the torque of the belt fixing retaining bolts on both front seats retorqueing if required.

5,599 vehicles · built 1 Jun 1995 to 31 Aug 1995

The window operating switch may latch in the 'pressed' condition. This could result in the window continuing to operate up or down when pressure on the switch is released.

Fix: Recall the affected vehicles for replacement of the original window switches with quality assured units.

1,415 vehicles · built 10 Aug 1992 to 15 Sep 1992

The window operating switch may latch in the 'pressed' condition. This could result in the window continuing to operate up or down when pressure on the switch is released.

Fix: Recall the affected vehicles for replacement of the original window switches with quality assured units.

1,415 vehicles · built 10 Aug 1992 to 15 Sep 1992