Fiat recalls

On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.

Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes.

96 vehicles · built 26 Jul 2025 to 13 Oct 2025

On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.

Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes.

180 vehicles · built 3 Oct 2025 to 31 Dec 2025

Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.

Fix: Update the In-Vehicle-Infotainment software via Over-the-Air.

768 vehicles · built 20 Nov 2023 to 5 Jul 2025

Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.

Fix: Update the In-Vehicle-Infotainment software via Over-the-Air.

1,426 vehicles · built 25 Aug 2023 to 8 May 2025

Affected vehicles may have been fitted with fuel return pipes not according to specification which can lead to a fuel leak.

Fix: Check the fuel return pipes and replace if necessary.

680 vehicles · built 9 May 2025 to 11 Dec 2025

On affected vehicles there is a requirement to update the Engine Control Module (ECM) calibration due to a production non-conformity and not fulfilling emission regulatory requirements.

Fix: Update the ECM software calibration

192 vehicles · built 30 Nov 2022 to 26 Sep 2024

On a number of Fiat 600 vehicles due to a production nonconformity there is a requirement to inspect the brake pedal bracket connection and if necessary perform a rework to eliminate any potential risk of brake pedal disengagement In the event of brake pedal failure the Electronic Park Brake located on the centre console can be applied while driving to bring the vehicle to a controlled stop. Additionally when active the Automatic Emergency Braking system will intervene if it detects an imminent collision.

Fix: The permanent repair involves the Fiat dealer checking for the presence of the clip confirming correct assembly and reworking it if necessary in accordance with Fiat reference F53D.

157 vehicles · built 4 Sep 2025 to 22 Oct 2025

On affected vehicles the tyre pressure label may show incorrect or missing information which does not meet regulatory requirements.

Fix: Replace the tyre pressure label.

60 vehicles · built 12 Dec 2023 to 12 Mar 2025

On affected vehicles the Automatic Emergency Brake (AEB) function may remain deactivated in a specific use case. If the customer seeks to reactivate the AEB after previously deactivating it during the same driving cycle (key on/off) it will remain deactivated however the icon on the cluster to alert about deactivation remains off. This does not meet regulatory requirements.

Fix: Update front camera software.

386 vehicles · built 20 Sep 2024 to 7 Mar 2025

On affected vehicles the Automatic Emergency Brake (AEB) function may remain deactivated in a specific use case. If the customer seeks to reactivate the AEB after previously deactivating it during the same driving cycle (key on/off) it will remain deactivated however the icon on the cluster to alert about deactivation remains off. This does not meet regulatory requirements.

Fix: Update front camera software.

447 vehicles · built 7 Oct 2024 to 11 Mar 2025

On affected vehicles there is a risk of a fuel leak at the high-pressure fuel pipe and rail connections which in a worst-case could result in a vehicle fire.

Fix: Check and tighten high-pressure fuel pipe and rail connections.

2,419 vehicles · built 9 Feb 2024 to 17 May 2025

On affected vehicles incorrect data has been entered on the registration document and correspondingly the Certificate of Conformity (CoC).

Fix: The registration document must be amended and a new CoC issued.

591 vehicles · built 22 Aug 2022 to 21 Apr 2023

On affected vehicles incorrect data has been entered on the registration document and correspondingly the Certificate of Conformity (CoC).

Fix: The registration document must be amended and a new CoC issued.

11,381 vehicles · built 22 Aug 2022 to 22 Apr 2023

On affected vehicles incorrect data has been entered on the registration document and correspondingly the Certificate of Conformity (CoC).

Fix: The registration document must be amended and a new CoC issued.

486 vehicles · built 3 Sep 2022 to 23 Apr 2023

On affected vehicles equipped with an Advanced Driver Assistance System (ADAS) functionality the AEB/LKA (Active Emergency Brake/Lane Keep Assist) can be deactivated simultaneously. The vehicle does not therefore meet regulatory requirements.

Fix: Install updated software over the air (OTA).

101 vehicles · built 22 Mar 2024 to 7 Jun 2024

On affected vehicles the radio display screen may be incorrectly secured.

Fix: Check the fixing of the screen and add any missing fixings.

656 vehicles · built 21 Mar 2024 to 14 Oct 2024

On affected vehicles the fastening nut may be missing from the negative terminal of the high-voltage battery pack which could result in a loss of torque failure to start the vehicle and in extreme cases it could present a possible fire hazard.

Fix: The affected vehicles will have the high-voltage battery replaced.

1 vehicles · built 23 Sep 2021 to 13 Nov 2023

On affected vehicles there may be insufficient fixing on the 1st and/or 2nd row of seats that could potentially allow seat movement in the event of a collision

Fix: On the affected vehicles seat fixings will be reworked

75 vehicles · built 29 Aug 2024 to 8 Oct 2024

Affected vehicles are fitted with a front camera with an incorrect hardware ID which causes an error code within the car system. Once an error code is set and recorded the camera is always in fault mode whenever it is switched on. This will result in the ADAS (Advanced Driver Assistance System) remaining inactive. This inactive status is a nonconformity with regulatory requirements.

Fix: Replace the front camera.

3 vehicles · built 23 Mar 2024 to 3 Apr 2024

Affected vehicles may have been fitted with the incorrect radio. The radio fitted does not have rear view camera functionality and therefore may not comply with regulatory requirements.

Fix: Replace the radio.

11 vehicles · built 4 Apr 2024 to 17 Jul 2024

On affected vehicles the steering rack fitted may not conform to specification and result in an increased force to rotate the steering wheel.

Fix: On the affected vehicles the steering rack will be replaced

1 vehicles · built 5 Apr 2024 to 9 Aug 2024

Affected vehicles may have been equipped with the incorrect rear springs which can result in impaired driving behaviour when fully loaded or a risk of rear spring detachment in a worst-case scenario when empty.

Fix: Replace both rear springs.

80 vehicles · built 19 Feb 2024 to 28 Jun 2024

Affected vehicles may have the urea system management menu missing from the instrument panel. This may result in warning messages not being displayed on the instrument panel cluster depending on the urea level. In this condition the vehicle does not comply to emission regulatory requirements.

Fix: Check and if necessary install modified software.

14 vehicles · built 6 Mar 2024 to 6 Mar 2024

Affected vehicles may have been equipped with Engine Control Unit (ECU) software not fulfilling regulation requirements.

Fix: Update to the ECU software.

611 vehicles · built 19 May 2022 to 29 Jul 2023

On affected vehicles there could be a loss of certain ground connections for some electrical harnesses which may result in the loss of several vehicle functions.

Fix: Check and re-tighten the ground connections.

3 vehicles · built 15 Apr 2023 to 29 Jan 2024

On affected vehicles the reversing gear switch is not according to specification. This could result in a failure to illuminate the rear light of the vehicle during a reversing manoeuvre.

Fix: Check the reversing gear switch and replacement if required

387 vehicles · built 29 Mar 2023 to 17 Jul 2023

On affected vehicles the reversing gear switch is not according to specification. This could result in a failure to illuminate the rear light of the vehicle during a reversing manoeuvre.

Fix: Check the reversing gear switch and replacement if required

90 vehicles · built 28 Mar 2023 to 29 Jul 2023

Affected vehicles may display incorrect tyre size information on the Certificate of Conformity (CoC).

Fix: The CoC must be replaced.

23 vehicles · built 6 Apr 2021 to 23 Nov 2023

Affected vehicles may display incorrect tyre size information on the Certificate of Conformity (CoC).

Fix: The CoC must be replaced.

81 vehicles · built 20 Oct 2022 to 23 May 2023

Affected vehicles fitted with the side airbag/head airbag may not have the side crash sensor connected correctly which may in a worst-case scenario result in non-deployment of the airbag in a side impact/crash.

Fix: To check the correct engagement/connection of the side crash sensor.

197 vehicles · built 13 Mar 2023 to 23 Jun 2023

Affected vehicles fitted with the side airbag/head airbag may not have the side crash sensor connected correctly which may in a worst-case scenario result in non-deployment of the airbag in a side impact/crash.

Fix: To check the correct engagement/connection of the side crash sensor.

Vehicle count not given · built 13 Mar 2023 to 23 Jun 2023

Affected vehicles may have a tyre load index on the vehicle that is lower than the declared rear axle capacity.

Fix: Replacement of the manufacturer's label fitted to the vehicle and supply the customer with an addendum to the COC (Certificate of Conformity).

122 vehicles · built 3 Oct 2022 to 15 Mar 2023

Affected vehicles may have a tyre load index on the vehicle that is lower than the declared rear axle capacity.

Fix: Replacement of the manufacturer's label fitted to the vehicle and supply the customer with an addendum to the COC (Certificate of Conformity).

Vehicle count not given · built 3 Oct 2022 to 15 Mar 2023

Affected vehicles may not have the correct installation and tightening between the suspension control arm and the steering knuckle joint.This may possibly result in the control arm bolt becoming detached from the knuckle seat whilst the vehicle is in motion In the worst case this could lead to loss of vehicle control.

Fix: Check installation of joint and if necessary correctly install joint.

199 vehicles · built 31 Mar 2023 to 31 May 2023

Affected vehicles may not have the correct installation and tightening between the suspension control arm and the steering knuckle joint.This may possibly result in the control arm bolt becoming detached from the knuckle seat whilst the vehicle is in motion In the worst case this could lead to loss of vehicle control.

Fix: Check installation of joint and if necessary correctly install joint.

Vehicle count not given · built 31 Mar 2023 to 31 May 2023

The calibration for urea pump diagnostics in the ECU (Engine Control Unit) is not fulfilling the regulation requirement.

Fix: Update to the ECU (engine control unit) calibration software.

273 vehicles · built 19 Jan 2022 to 10 Jan 2023

Affected vehicles may have been fitted with a faulty 48-volt battery. This may lead to a loss of the functionality of the battery. This may result in a risk of thermal run away in the case of water infiltration.

Fix: The repair is a check of the PBU valve code and replacement of the 48-volt battery if necessary.

68 vehicles · built 25 Mar 2023 to 14 Apr 2023

Affected vehicles may have been fitted with a faulty 48-volt battery. This may lead to a loss of the functionality of the battery. This may result in a risk of thermal run away in the case of water infiltration.

Fix: The repair is a check of the PBU valve code and replacement of the 48-volt battery if necessary.

68 vehicles · built 18 Nov 2022 to 12 May 2023

On certain vehicles equipped with an Air Conditioning compressor these may experience the condition of a powertrain shutdown in the event of an AC compressor issue. This could result in the engine non-starting or stalling.

Fix: The repair is an upload of modified ECU software.

259 vehicles · built 2 Feb 2022 to 23 Sep 2022

On certain vehicles equipped with an Air Conditioning compressor these may experience the condition of a powertrain shutdown in the event of an AC compressor issue. This could result in the engine non-starting or stalling.

Fix: The repair is an upload of modified ECU software.

259 vehicles · built 30 Jun 2022 to 5 Sep 2022

On affected vehicles diesel fuel leaks may possibly occur due to the vehicle being fitted with a fuel return pipe without protective tape. This could cause a potential deformation of the fuel return pipe and in extreme cases could lead to fuel leaks and the risk of fire in the engine compartment.

Fix: The application of protective tape around the fuel return pipe.

1 vehicles · built 12 Dec 2022 to 3 Mar 2023

On the affected vehicle the tightening torque applied to the steering rack during production may be insufficient.

Fix: The repair is replacement of the left steering pinion tie rod retainer nut and apply the correct torque.

1 vehicles · built 3 Nov 2022 to 14 Dec 2022

Some vehicles may have been equipped with an incorrectly positioned fuel pipe.

Fix: : Check fuel pipe positioning correct if necessary and fit protective sleeve.

1 vehicles · built 22 Nov 2021 to 25 Jul 2022

Some vehicles may have been equipped with an incorrectly positioned fuel pipe.

Fix: Check fuel pipe positioning correct if necessary and fit protective sleeve.

4 vehicles · built 22 Nov 2021 to 25 Jul 2022

Certain kinds of vehicle acceleration could cause the speed limiter to turn off.

Fix: Update the software of engine control module.

3 vehicles · built 21 Oct 2020 to 16 Jul 2022

The positive lead on the auxiliary battery terminal may not be tightened correctly

Fix: The integrity of the positive lead terminal must be checked and if it is damaged it must be replaced. If it is not damaged the correct torque must be applied to the nut to ensure correct tightening.

6 vehicles · built 26 Jan 2022 to 3 Jun 2022

Vehicles may have been produced with ineffective/incorrect tightening of a lock nut on the steering gear rod.

Fix: Check for the correct tightening of the lock nut and check/adjust wheel alignment if tightening was required.

1 vehicles · built 22 Mar 2022 to 30 Mar 2022

A High Voltage Harness connector might not be to the correct specification

Fix: Check the connector and if required replace the harness.

11 vehicles · built 28 Mar 2022 to 29 Apr 2022

Vehicles may have been fitted with the front crossmember incorrectly tightened.

Fix: Check and tighten the bolts on the front crossmember to the prescribed torque. Replacement of the steering rack if necessary.

2 vehicles · built 2 Mar 2022 to 2 Mar 2022

Vehicles may have been produced with ineffective/incorrect tightening of a lock nut on the steering gear rod.

Fix: Check for the correct tightening of the lock nut and check/adjust wheel alignment if tightening was required.

52 vehicles · built 21 Mar 2022 to 5 May 2022

A number of vehicles may have been fitted with a faulty left or right side half-shaft (drive shaft).

Fix: The half-shaft identified as faulty according to traceability data must be replaced

2 vehicles · built 17 Jun 2021 to 12 Oct 2021

The Certificate of Conformity (CoC) and the registration card must be updated due to the stated gross vehicle weight rating being incorrect.

Fix: The CoC and registration documents must be replaced to reflect the correct data.

14 vehicles · built 11 Mar 2021 to 8 Oct 2021

Due to a nonconformity in production the side marker lights are not functioning.

Fix: The proxy file of the vehicle must be updated to allow the marker lights to function as intended.

213 vehicles · built 27 Mar 2021 to 22 Nov 2021

Due to a nonconformity in production the swivel plates on which the two front seats are anchored must be�replaced.

Fix: Replace the swivel plates onto which the front seats are anchored.

5 vehicles · built 1 Feb 2021 to 31 Jul 2021

The drive shaft joints may fail

Fix: Replace the drive shaft or shafts as required

1,705 vehicles · built 9 Sep 2020 to 30 Jun 2021

The third (high level) brake light may not function.

Fix: Update the software to activate the third brake light function.

170 vehicles · built 28 Apr 2021 to 3 Aug 2021

Due to a fault in the airbag control module software the airbag system may fail to be active without this being indicated on the instrument panel.

Fix: Carry out an update to the airbag control module and instrument panel software.

620 vehicles · built 31 Oct 2020 to 15 Mar 2021

Due to a nonconformity of the fuel return pipe diesel fuel leaks may occur.

Fix: Check the conformity of the fuel return pipe and if necessary replace.

18 vehicles · built 30 Nov 2020 to 2 Feb 2021

Due to incorrect type-approval data processing the manufacturer's plate (VIN plate) and registration document must be replaced.

Fix: Replace the VIN plate and update the registration document as required.

18 vehicles · built 10 Sep 2018 to 8 Jul 2020

Non-conforming steering knuckles may have been fitted.

Fix: Check the installed steering knuckles and replace if necessary.

2,633 vehicles · built 1 Apr 2019 to 29 Oct 2020

The �Sport� mode system may not be set correctly and therefore may not comply with type approval requirements.

Fix: The proxi file must be updated to solve the non conformity.

30 vehicles · built 20 Mar 2020 to 27 Jul 2020

The Start & Stop system may not be set correctly and therefore may not comply with type approval requirements.

Fix: The proxi file must be updated to solve the non conformity.

24 vehicles · built 16 Jun 2020 to 10 Aug 2020

The rear right brake calliper could display micro-cracks

Fix: The production date must be checked and if necessary the brake calliper must be replaced

72 vehicles · built 14 Nov 2019 to 20 Jan 2020

The drive axle may touch the wiring with consequent damage to the wiring.

Fix: Check the correct layout of the wiring inspect its condition and reposition or replace as necessary

196 vehicles · built 26 Sep 2018 to 14 Nov 2019

The brake vacuum pump may not function correctly.

Fix: Replace the brake vacuum pump of affected vehicles

429 vehicles · built 24 Oct 2019 to 5 Dec 2019

The brake line (pipe) may not be fixed correctly

Fix: Check the clip is fixed correctly and replace damaged brake pipes

24,484 vehicles · built 31 Oct 2014 to 16 Jul 2019

The ballast support bracket welded to the rear floor could break

Fix: Add two new fixings for each ballast support

345 vehicles · built 26 Jun 2013 to 13 Jul 2016

Potential movement of the battery and consequent breakage of the battery wires.

Fix: A battery spacer must be fitted

77 vehicles · built 14 Mar 2019 to 19 Jun 2019

The handbrake cable connector on the rear brake calliper may break

Fix: Check the rear brake calliper conformity and replace if necessary

7 vehicles · built 28 Mar 2019 to 26 Jun 2019

Potential risk of access step detachment from the vehicle body.

Fix: Replacement of the access step fasteners.

982 vehicles · built 12 Feb 2016 to 20 Nov 2018

Drive shaft may fail.

Fix: Replace the right hand drive shaft

164 vehicles · built 13 Aug 2018 to 19 Dec 2018

First gear could be engaged with the vehicle in motion and the shift lever in the D position.

Fix: Update the transmission control module software

937 vehicles · built 6 Jun 2016 to 27 Apr 2019

First gear could be engaged with the vehicle in motion and the shift lever in the D position.

Fix: Update the transmission control module software

937 vehicles · built 6 Jun 2016 to 27 Apr 2019

Due to a non-conformity in production fuel leakage may occur from the fuel tank

Fix: Replace the fuel tank

5 vehicles · built 7 Mar 2019 to 29 Apr 2019

Non-conformity in the airbag control module software

Fix: Update the airbag control module software

3,870 vehicles · built 24 Oct 2017 to 18 Apr 2019

The intercooler sleeve may detach from the throttle body

Fix: Replace the current sleeve and respective metal bands with modified parts.

3,630 vehicles · built 1 Mar 2018 to 14 Mar 2019

The parking brake efficiency could be lost due to a production problem with the cables.

Fix: Replacement of the parking brake cables on affected vehicles.

72 vehicles · built 18 May 2018 to 22 Nov 2018

The steering column height adjustment mechanism could accidentally release.

Fix: Replace the steering column mechanism.

25 vehicles · built 6 Sep 2016 to 31 Dec 2018

Possible interference between the fuel supply and return lines.

Fix: Reposition the pipes to avoid interference.

251 vehicles · built 24 Aug 2018 to 1 Feb 2019

In case of an accident if the rear seat belts are not fastened i.e. if the rear seat is not occupied by a passenger or is occupied by a child restraint system coupled only to the Isofix anchors and the pretensioners are deployed the rear seat latch could be released. The contents of the rear luggage area if unsecured could enter the cabin area

Fix: Replace the latch bezels with bezels the shape of which prevents the seat belts from interfering with the latch and releasing the seat in the event of a pretensioner deployment.

25,535 vehicles · built 2 Jun 2015 to 1 Aug 2018

Some vehicles were assembled without the engine suspension reaction bracket fitted on the transmission side. The vehicles must be repaired by fitting the missing components (transmission reaction bracket and washer). The defect can be detected by noise and vibration being emitted from the front area of the vehicle. If ignored a possible consequence is a failed differential box resulting in oil leakage and in some cases the drive shaft could become disengaged and drop below the vehicle whilst in motion.

Fix: Fit the missing components (transmission reaction bracket and washer).

134 vehicles · built 4 Apr 2018 to 6 Jul 2018

On a number of Fiat Fullback vehicles in some weather conditions (high temperatures) the mechanism inside the door lock may not function as intended. This can allow the door(s) to open unintentionally.

Fix: The door locks must be replaced with compliant components.

448 vehicles · built 12 Feb 2016 to 15 Mar 2017

The intercooler sleeve may detach from the throttle body. The engine management warning light will illuminate and a loss of power may occur.

Fix: On affected vehicles replace the current retainer with a new version to ensure the sleeve connection between intercooler sleeve and throttle body.

9,904 vehicles · built 17 Feb 2016 to 13 Sep 2017

Due to a nonconformity in the production process the instrument cluster may stick and display incorrect speed information.

Fix: On affected vehicles replace the instrument cluster.

680 vehicles · built 19 Jul 2017 to 7 Oct 2017

Due to a non-conformity in the production process the electrical power steering (EPS) must be replaced. This will prevent a potential loss of steering assistance. Loss of EPS functionality could increase the risk of a collision occurring.

Fix: Replace the Electrical Power Steering unit

42 vehicles · built 21 Sep 2017 to 29 Sep 2017

On some Fiat 500L vehicles a layout non-conformity could cause abrasion of the supplementary heater (PTC) wiring. This could result in possible electric short-circuiting with the possibility of a loss of some vehicle safety. In the worst case it could cause a vehicle fire..

Fix: Apply a cut-proof sheath on the supplementary heater wiring to protect it from abrasions.

17,329 vehicles · built 24 Aug 2012 to 14 Sep 2017

The EGR pipe could fracture due to a potential non-conformity the fractured pipe may damage the alternator resulting in a loss of battery voltage and potentially a loss of engine power.

Fix: The pipe must be checked and if incorrect replaced with a new part.

4,486 vehicles · built 17 Feb 2016 to 13 Sep 2017

Due to a non-conformity in the supplier's production process the front seat belt pretensioner could malfunction in the event of a collision.

Fix: Correct operation will be restored by applying a service kit designed for this purpose. Affected vehicles will be recalled to have this fitted.

1,168 vehicles · built 26 Apr 2016 to 9 Jun 2017

The driver�s airbag was manufactured with an incorrectly manufactured airbag inflator initiator that may not ignite when a deployment voltage is provided to the initiator. As a result vehicles may experience a �non-deployment� of the driver airbag during a crash event warranting an airbag deployment which could increase the risk of injury.

Fix: Recall the vehicles that are likely to be affected and replace the driver airbag unit (initiator included) with a quality assured unit.

11 vehicles · built 2 Nov 2016 to 27 Apr 2017

The driver�s airbag was manufactured with an incorrectly manufactured airbag inflator initiator that may not ignite when a deployment voltage is provided to the initiator. As a result vehicles may experience a �non-deployment� of the driver airbag during a crash event warranting an airbag deployment which could increase the risk of injury.

Fix: Recall the vehicles that are likely to be affected and replace the driver airbag unit (initiator included) with a quality assured unit.

2 vehicles · built 4 Nov 2016 to 19 Dec 2016

Due to an error in the production process the engine camshaft may break.

Fix: Check affected vehicles and where necessary replace the camshaft.

239 vehicles · built 14 Dec 2016 to 9 Feb 2017

The transmission could unexpectedly switch to the N position due to a nonconformity in the transmission wiring assembly process.

Fix: On affected vehicles reprogram the transmission control module. Where necessary replace the transmission wiring

64 vehicles · built 23 Dec 2014 to 21 Jan 2016

It has been identified that the maximum load capacity for the load restraint hooks in the load compartment of the vehicle has been incorrectly written in the Owner Handbook. The correct load capacity is 500 daN and not the 625 daN as written. If the correct load capacity of 500 daN is not adhered to then the load hooks may not retain the load due to overloading. This could result in an unsecured load with the potential for loss of control of the vehicle.

Fix: Recall all affected vehicles to attach a load capacity label within the load compartment and install an additional amended page to the Owner Handbook.

548 vehicles · built 23 Mar 2016 to 27 Dec 2016

It has been identified that due to the non-conforming layout of the airbag wiring and missing cut-proof protection the airbag wiring may interfere with the steering wheel wiring terminal. This can cause the abrasion of the wiring itself. This abrasion may cause a short-circuit and consequent inadvertent deployment of the steering wheel airbag.

Fix: Recall all affected vehicles to inspect the airbag wiring and apply cut proof padded tape.

25 vehicles · built 3 Sep 2015 to 9 Nov 2016

It has been identified that the rear brake shoe lining material may not have been manufactured to the correct specification. This could result in a reduction in brake performance from the rear brakes.

Fix: Recall all affected vehicles to check the conformity of the brake linings and if found to be incorrect replace with new brake shoes which meet the correct conformity.

1,665 vehicles · built 2 Sep 2016 to 18 Oct 2016

It has been identified that due to a nonconformity in the transmission casing mount material there is a possibility that the casting may fail. This may affect the control of the vehicle.

Fix: Recall all affected vehicles to check and if required replace the mounting with new quality assured item.

7 vehicles · built 28 Aug 2016 to 28 Sep 2016

In the event of a significant frontal collision the driver's airbag may not deploy correectly due to a non-conformity which occurred in the supplier's production process. The airbag when deployed may cause injury to the driver due to contaminated parts within the airbag module.

Fix: Recall the vehicles that are likely to be affected and replace the airbag inflator.

6 vehicles · built 2 May 2016 to 27 Jul 2016

The seat may not remain in position when subjected to greater than normal driving forces such as those involved in an impact. This may possibly cause injury to the driver/passenger seated in the right hand front seat. The right hand front seat guides may not conform to design specification and installation specifications.

Fix: Recall the vehicles that are likely to be affected and check the installation of the original seat guide. If it does not conform replace the seat cushion structure (guide).

1,045 vehicles · built 7 Dec 2015 to 31 Mar 2016

The seat may not remain in position when subjected to greater than normal driving forces such as those involved in an impact. This may possibly cause injury to the driver/passenger seated in the right hand front seat. The right hand front seat guides may not conform to design specification and installation specifications.

Fix: Recall the vehicles that are likely to be affected and check the installation of the original seat guide. If it does not conform replace the seat cushion structure (guide).

1,045 vehicles · built 7 Dec 2015 to 27 Jun 2016

In some circumstances the driver and passenger may experience consequent switching off of the instrument panel light and possible deactivation of other electronic systems such as the ABS and airbags. The concern is caused by loose connections at the ignition switch contact holder block.

Fix: Recall the vehicles that are likely to be affected and replace the ignition switch contact holder block.

5,303 vehicles · built 1 Oct 2014 to 11 Dec 2015

The batch number of the power steering pump must be checked and if found to be from a faulty batch replaced. On the faulty batches there is nonconformity of the external supply and in certain circumstances the power steering pump may fail causing the driver to use additional input to steer the vehicle therefore delaying the directional movement of the vehicle.

Fix: Check the production date of the pump and if the power steering pump is from a faulty batch replace the pump.

118 vehicles · built 16 Sep 2015 to 19 Oct 2015

In some circumstances the headlights can switch off without warning which will increase the risk of an accident.

Fix: Recall the vehicles that are likely to be affected and update the Body Computer with new improved software.

8,091 vehicles · built 4 Jul 2011 to 17 Apr 2013

After repeated activation of the fuel heater cover in cold conditions an electric connector the fuel heater cover may overheat. This may allow air ingress which could cause difficulty starting the engine or engine stalling. In extreme cases fuel may leak onto the road surface.

Fix: Check the condition of the heated diesel filter cover and connector. If deteriorated or damaged replace the cover or connector.

674 vehicles · built 3 Sep 2012 to 27 Aug 2015

The tyres fitted to affected vehicles are incompatible with the weight capacity of the vehicle. This may cause a tyre failure due to incorrect loading of the vehicle.

Fix: Replace existing tyres with those of a load index compatible with the vehicle's weight capacity.

61 vehicles · built 15 Jan 2014 to 4 Feb 2014

It has been identified that the front seatbelt anchorage links may not have been manufactured to the correct specification. If the link is subjected to an abnormal force then it may not perform as required.

Fix: Recall all the affected vehicles to check the link and if required replace it.

1,041 vehicles · built 1 Sep 2014 to 20 Nov 2014

It has been identified that the front seatbelt anchorage links may not have been manufactured to the correct specification. If the link is subjected to an abnormal force then it may not perform as required.

Fix: Recall all the affected vehicles to check the link and if required replace it.

1,041 vehicles · built 1 Sep 2014 to 20 Nov 2014

It has been identified that the front seatbelt anchorage links may not have been manufactured to the correct specification. If the link is subjected to an abnormal force then it may not perform as required.

Fix: Recall all the affected vehicles to check the link and if required replace it.

42 vehicles · built 1 Sep 2014 to 20 Nov 2014

Following deactivation of the passenger airbag via the dashboard menu with the ignition on the passenger airbag may be reactivated following a fast cycling (less than 2 seconds) of the ignition key (on-off-on). The passenger airbag deactivation warning light would also have been switched off but the driver may not notice. In a collision and in certain conditions an unintended airbag deployment may contribute to a loss of further control or injury to driver and/or passengers.

Fix: Recall the vehicles that are likely to be affected and replace the airbag control unit.

24 vehicles · built 1 Jul 2014 to 31 Jul 2014

Following deactivation of the passenger airbag via the dashboard menu with the ignition on the passenger airbag may be reactivated following a fast cycling (less than 2 seconds) of the ignition key (on-off-on). The passenger airbag deactivation warning light would also have been switched off but the driver may not notice. In a collision and in certain conditions an unintended airbag deployment may contribute to a loss of further control or injury to driver and/or passengers.

Fix: Recall the vehicles that are likely to be affected and replace the airbag control unit.

24 vehicles · built 1 Jul 2014 to 31 Jul 2014

The fuel return pipe connector at the injectors may overtime wear and leak. The leaking fuel is a fire risk and also could be hazardous to other road users.

Fix: Recall the vehicles that are likely to be affected and replace the fuel return pipe.

492 vehicles · built 28 Jul 2011 to 10 Apr 2014

It is possible under extreme conditions that the wiring harness under the dashboard could come into contact with the steering column. This over a period of time may result in the chaffing of wires in the harness. If this should occur then it is possible both the exterior and instrument lights could fail.

Fix: Recall all affected vehicles to provide additional security of the wiring loom.

91,448 vehicles · built 12 Sep 2011 to 8 Jul 2014

It is possible under extreme conditions that the wiring harness under the dashboard could come into contact with the steering column. This over a period of time may result in the chaffing of wires in the harness. If this should occur then it is possible both the exterior and instrument lights could fail.

Fix: Recall all affected vehicles to provide additional security of the wiring loom.

3,318 vehicles · built 12 Sep 2011 to 9 May 2014

On certain vehicles the front brake discs may not be the required thickness for the vehicle definition. This concern may result in reduced braking efficiency.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the front brake discs.

49 vehicles · built 29 Aug 2013 to 13 Sep 2013

An internal fault with the wiper motor could cause it to stop working. In some rare cases the windscreen wipers may stop working while in operation.

Fix: Recall affected vehicles and check the manufacturing date of the wiper motor and add a supplementary earth wiring harness if necessary.

49 vehicles · built 8 Jul 2013 to 24 Sep 2013

It has been identified that the hand brake lever may not have been manufactured to the correct specification. It could result in the vehicle rolling away.

Fix: Recall all affected vehicles and replace the hand brake assembly with a new quality controlled assembly

4 vehicles · built 26 Sep 2013 to 26 Sep 2013

The fuel pump protection bracket is not to conformity and in the event of an accident the fuel feed pipe could be damaged leading to an increased risk of fuel leakage and possible fire.

Fix: Recall the vehicles that are likely to be affected to replace the fuel pump feed protection bracket and reposition the fuel feed pipe.

271 vehicles · built 14 Feb 2013 to 10 Apr 2013

The steering column to steering wheel shaft may not have been assembled correctly. If not corrected noise and play will become apparent and if these warnings are not acted on eventually steering control could be lost.

Fix: Recall the vehicles that are likely to be affected to check and where necessary refit the steering column correctly to the steering wheel shaft.

16 vehicles · built 15 Jun 2011 to 28 Nov 2011

In the event of a side impact on a small number of vehicles fitted with the Sabelt seat option the door side panels may break in an unsuitable way and possibly cause injury to the occupants.

Fix: Recall the vehicles that are likely to be affected to replace the door panels.

23 vehicles · built 1 Aug 2012 to 30 Sep 2012

A connector on the brake servo pipe may fail and cause a loss of vacuum assistance necessitating the driver to include additional effort when braking.

Fix: Recall the vehicles that are likely to be affected to fit a new brake servo pipe.

3,095 vehicles · built 1 Jun 2012 to 30 Sep 2012

A connector on the brake servo pipe may fail and cause a loss of vacuum assistance necessitating the driver to include additional effort when braking.

Fix: Recall the vehicles that are likely to be affected to fit a new brake servo pipe.

3,095 vehicles · built 1 Jun 2012 to 30 Sep 2012

A connector on the brake servo pipe may fail and cause a loss of vacuum assistance necessitating the driver to include additional effort when braking.

Fix: Recall the vehicles that are likely to be affected to fit a new brake servo pipe.

3,095 vehicles · built 1 Jun 2012 to 30 Sep 2012

A connector on the brake servo pipe may fail and cause a loss of vacuum assistance necessitating the driver to include additional effort when braking.

Fix: Recall the vehicles that are likely to be affected to fit a new brake servo pipe.

3,095 vehicles · built 1 Jun 2012 to 30 Sep 2012

A connector on the brake servo pipe may fail and cause a loss of vacuum assistance necessitating the driver to include additional effort when braking.

Fix: Recall the vehicles that are likely to be affected to fit a new brake servo pipe.

3,095 vehicles · built 1 Jun 2012 to 30 Sep 2012

During the assembly of the vehicle it is possible the right hand rear suspension coil spring was damaged. Over time any damage could lead to the failure of the coil spring.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the coil spring.

2 vehicles

The lower fastening brackets which secure the body to the chassis are not manufactured to specification. As a result the brackets may fail and render the body not fully secure.

Fix: Recall the vehicles that are likely to be affected to replace the body securing brackets with ones manufactured to specification.

33 vehicles · built 1 Mar 2011 to 31 Dec 2011

It is possible the rear axle leaf spring retaining bolts were not tightened to the correct specification during production. This could allow movement between the axle and leaf spring. In extreme circumstances this could cause the vehicle to lose control.

Fix: Recall all affected vehicles to replace the U bolts with new items and tighten them to the correct specification.

8 vehicles · built 1 Sep 2011 to 30 Sep 2011

The wiring for the power steering electric pump may interfere with the edge of the left front wheel arch. This may cause damage to the wiring and a loss of power steering assistance.

Fix: Recall the vehicles that are likely to be affected so the wiring can be placed in a protective pipe. The wiring and pipe will then be secured in the correct position.

387 vehicles

The spare wheel located under the vehicle may become detached from the vehicle.

Fix: Recall the vehicles that are likely to be affected to replace the spare wheel lifting and securing mechanism.

8,704 vehicles · built 1 Apr 2006 to 31 Mar 2010

On vehicles fitted with comfort instrument panel when the passenger's airbag has been deactivated it is possible in some cases that it will reactivate spontaneously.

Fix: Recall the vehicles that are likely to be affected to update the software.

1,074 vehicles · built 1 Jul 2009 to 30 Jun 2011

On vehicles fitted with comfort instrument panel when the passenger's airbag has been deactivated it is possible in some cases that it will reactivate spontaneously.

Fix: Recall the vehicles that are likely to be affected to update the software.

1,074 vehicles · built 1 Jul 2009 to 30 Jun 2011

The fuel return pipe on 2.0 16v JTD engine variants may interfere with the engine mounting and/or fuel filter.

Fix: Check and re-route the pipe and fit a protective sheath.

17 vehicles · built 1 Jan 2010 to 30 Nov 2010

The layout of the ABS wiring maybe incorrect in the area of the battery holding unit. The wiring may on some vehicles maybe trapped and pinched exposing wiring in some area. this may cause damage and in extreme cases a potential risk of fire.

Fix: Repair to inspect and repair the wiring using industry accepted soldered connectors

8,138 vehicles · built 1 Jul 2009 to 31 Mar 2010

The layout of the ABS wiring maybe incorrect in the area of the battery holding unit. The wiring may on some vehicles maybe trapped and pinched exposing wiring in some area. this may cause damage and in extreme cases a potential risk of fire.

Fix: Repair to inspect and repair the wiring using industry accepted soldered connectors

8,138 vehicles · built 1 Jul 2009 to 30 Mar 2010

The layout of the ABS wiring maybe incorrect in the area of the battery holding unit. The wiring may on some vehicles maybe trapped and pinched exposing wiring in some area. this may cause damage and in extreme cases a potential risk of fire.

Fix: Repair to inspect and repair the wiring using industry accepted soldered connectors

8,138 vehicles · built 1 Jul 2009 to 31 Mar 2010

The upper fork on the steering shaft fork may not have been correctly fixed/'staked' onto the shaft. This may cause a knock from the steering and in extreme cases the fork may separate from the shaft and result in loss of steering control.

Fix: To check the shaft for the presence of the 2 'Stake' markings.

544 vehicles · built 1 Sep 2009 to 30 Nov 2009

The upper fork on the steering shaft fork may not have been correctly fixed/'staked' onto the shaft. This may cause a knock from the steering and in extreme cases the fork may separate from the shaft and result in loss of steering control.

Fix: To check the shaft for the presence of the 2 'Stake' markings.

544 vehicles · built 1 Oct 2009 to 31 Dec 2009

The upper fork on the steering shaft fork may not have been correctly fixed/'staked' onto the shaft. This may cause a knock from the steering and in extreme cases the fork may separate from the shaft and result in loss of steering control.

Fix: To check the shaft for the presence of the 2 'Stake' markings.

544 vehicles · built 1 Sep 2009 to 30 Nov 2009

The upper fork on the steering shaft fork may not have been correctly fixed/'staked' onto the shaft. This may cause a knock from the steering and in extreme cases the fork may separate from the shaft and result in loss of steering control.

Fix: To check the shaft for the presence of the 2 'Stake' markings.

544 vehicles · built 1 Oct 2009 to 31 Dec 2009

The upper fork on the steering shaft fork may not have been correctly fixed/'staked' onto the shaft. This may cause a knock from the steering and in extreme cases the fork may separate from the shaft and result in loss of steering control.

Fix: To check the shaft for the presence of the 2 'Stake' markings.

544 vehicles · built 1 Sep 2009 to 30 Nov 2009

The upper fork on the steering shaft fork may not have been correctly fixed/'staked' onto the shaft. This may cause a knock from the steering and in extreme cases the fork may separate from the shaft and result in loss of steering control.

Fix: To check the shaft for the presence of the 2 'Stake' markings.

544 vehicles · built 1 Oct 2009 to 31 Dec 2009

The threaded portion of the brake linkage rod in the brake control system may not be to conformity. This could result in a reduction of braking efficiency.

Fix: Recall affected vehicles to check rod and replace if found not to meet conformity.

251 vehicles · built 1 Feb 2010 to 30 Jun 2010

In the case of a side impact the wrong airbag could deploy as a result of a software non-compliance.

Fix: Recall the vehicles that are likely to be affected to apply a software update.

29,130 vehicles · built 1 Dec 2009 to 31 Aug 2010

In the case of a side impact the wrong airbag could deploy as a result of a software non-compliance.

Fix: Recall the vehicles that are likely to be affected to apply a software update.

29,130 vehicles · built 1 May 2010 to 31 Aug 2010

In the case of a side impact the wrong airbag could deploy as a result of a software non-compliance.

Fix: Recall the vehicles that are likely to be affected to apply a software update.

29,130 vehicles · built 1 Dec 2009 to 31 Aug 2010

In the case of a side impact the wrong airbag could deploy as a result of a software non-compliance.

Fix: Recall the vehicles that are likely to be affected to apply a software update.

29,130 vehicles · built 1 Nov 2009 to 31 Aug 2010

In the case of a side impact the wrong airbag could deploy as a result of a software non-compliance.

Fix: Recall the vehicles that are likely to be affected to apply a software update.

29,130 vehicles · built 1 Nov 2009 to 31 Aug 2010

In the case of a side impact the wrong airbag could deploy as a result of a software non-compliance.

Fix: Recall the vehicles that are likely to be affected to apply a software update.

29,130 vehicles · built 1 Dec 2009 to 31 Aug 2010

The steering column upper shaft fixing bolt may not have had thread locking agent applied to it during assembly. This may allow it to come loose causing a noise. In extreme cases this may result in a loss of steering control.

Fix: Recall the vehicles that are likely to be affected to check and where necessary fit a bolt affixed with pre applied locking compound.

47 vehicles

The steering column upper shaft fixing bolt may not have had thread locking agent applied to it during assembly. This may allow it to come loose causing a noise. In extreme cases this may result in a loss of steering control.

Fix: Recall the vehicles that are likely to be affected to check and where necessary fit a bolt affixed with pre applied locking compound.

47 vehicles

The steering column upper shaft fixing bolt may not have had thread locking agent applied to it during assembly. This may allow it to come loose causing a noise. In extreme cases this may result in a loss of steering control.

Fix: Recall the vehicles that are likely to be affected to check and where necessary fit a bolt affixed with pre applied locking compound.

47 vehicles

It has been established that the anti-roll bar may not conform to specification. This should result in a noise from the suspension but in extreme cases vehicle stability could be compromised.

Fix: Recall affected vehicles and replace anti-roll bar with quality assured one.

223 vehicles · built 1 Dec 2009 to 28 Feb 2010

It has been established that the anti-roll bar may not conform to specification. This should result in a noise from the suspension but in extreme cases vehicle stability could be compromised.

Fix: Recall affected vehicles and replace anti-roll bar with quality assured one.

223 vehicles · built 1 Aug 2009 to 28 Feb 2010

The fuel return pipe may contact the engine sound insulation cover. This may cause a deterioration of the pipe and if not rectified a leak of fuel.

Fix: Recall the vehicles that are likely to be affected to fit a holding fastener to the fuel return pipe.

1,463 vehicles · built 1 Nov 2006 to 31 Oct 2007

Vehicles fitted with rear brake drums may suffer contamination of the brake lining. This is due to the entry of water and detritus into the drum through the back plate.

Fix: Recall affected vehicles to fit a gasket to the back plate where the handbrake cable enters the brake drum through the back plate.

21 vehicles · built 1 Mar 2007 to 31 Jul 2009

The headlights may fail because of a Body Control Computer software problem.

Fix: Recall the vehicles that are likely to be affected to update the software.

5,384 vehicles · built 1 Nov 2006 to 31 Oct 2007

It has been identified that the tightening torque of the steering shaft upper fixing bolt may not be correct. This may result in the emission of noise and in extreme cases breakage of the shaft which will result in loss of steering control.

Fix: Recalled vehicles will have the subject bolt checked for correct torque which if necessary will be set to the correct specification. If the torque is outside of the rework stipulated range the shaft will be replaced.

56,168 vehicles · built 1 Jul 2006 to 30 Apr 2008

It has been identified that the tightening torque of the steering shaft upper fixing bolt may not be correct. This may result in the emission of noise and in extreme cases breakage of the shaft which will result in loss of steering control.

Fix: Recalled vehicles will have the subject bolt checked for correct torque which if necessary will be set to the correct specification. If the torque is outside of the rework stipulated range the shaft will be replaced.

308 vehicles · built 1 Jul 2006 to 30 Apr 2008

There is a possibility of a short circuit in the ABS control unit due to infiltration of chemical solutions.

Fix: Recall affected vehicles and replace ABS module with modified type which is also fitted with plastic cover

25,977 vehicles · built 1 Jun 2003 to 30 Apr 2007

There is a possibility that the valve in the Brake Booster Vacuum Pump may not be compliant. This can result in loss of vacuum assistance.

Fix: Recall affected vehicles and replace pump.

4,329 vehicles · built 1 Feb 2006 to 31 Mar 2009

There is a possibility that fuel may leak from a faulty recirculation pipe connector.

Fix: Recall affected vehicles to check and if required change pipe.

15 vehicles · built 1 Mar 2009 to 31 May 2009

The manufacturer's plate information may refer to vehicles with a capacity of 8 hundred weight rather than 7 hundred weight.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the manufacturer's plate with one that is correct to the vehicle.

426 vehicles · built 1 Apr 2007 to 31 Oct 2008

It has been identified that on subject vehicles the rear brake back plate retaining bolts may not have been tightened to the correct specification. Should the bolts work loose this can result in noise illumination of the ABS warning light and in extreme cases wheel lock.

Fix: Recalled vehicles will have the subject bolts checked and tightened to the correct specification.

3,020 vehicles · built 1 Aug 2008 to 31 Jan 2009

Fuel may leak as on some engines the fuel manifolds may not be to specification. If the fuel manifold leaks it is possible that a loss of power could occur and the engine cut out.

Fix: Recall the vehicles that are likely to be affected to inspect the fuel manifold and check it for conformity to specification. Where necessary replace the fuel manifold.

1,893 vehicles · built 1 Sep 2008 to 31 Oct 2008

Fuel may leak as on some engines the fuel manifolds may not be to specification. If the fuel manifold leaks it is possible that a loss of power could occur and the engine cut out.

Fix: Recall the vehicles that are likely to be affected to inspect the fuel manifold and check it for conformity to specification. Where necessary replace the fuel manifold.

1,893 vehicles · built 1 Sep 2008 to 31 Oct 2008

Fuel may leak as on some engines the fuel manifolds may not be to specification. If the fuel manifold leaks it is possible that a loss of power could occur and the engine cut out.

Fix: Recall the vehicles that are likely to be affected to inspect the fuel manifold and check it for conformity to specification. Where necessary replace the fuel manifold.

1,893 vehicles · built 1 Sep 2008 to 31 Oct 2008

It has been identified that the possibility exists that the accelerator pedal's rotation pin may not have been inserted correctly. In this condition the accelerator pedal might stick.

Fix: Recalled vehicles will have the accelerator pedal checked for the presence of the pin. Should the pin be found to be missing the accelerator pedal will be changed.

158 vehicles · built 1 Jan 2008 to 30 Apr 2008

It has been identified that the possibility exists that a non conforming weld may be present on the vehicle's rear cross member with the fixing bracket for the wheel axle hub. This non conformity in time; could cause the weld to break and crack the rear cross member which could have an adverse effect on the vehicle's stability.

Fix: Recalled vehicles will have the subject cross member identification numbers and weld markings checked; to ascertain whether they conform. Should this not be the case the cross member will be replaced.

120 vehicles · built 1 Jun 2007 to 30 Jun 2007

It has been identified that the possibility exists of interference between the heater/climate control wiring and a dashboard bracket due to a missing retainer clip. In this condition abrasion of the wiring may occur with the attendant risk of an electrical short circuit

Fix: Recalled vehicles will be inspected for damage to the subject wiring which if this has occurred will be repaired and repositioned. In all cases a new clip will be fitted.

28,557 vehicles · built 1 Nov 2006 to 31 Oct 2007

A fire might occur in the engine compartment as a result of the waste gate excess pressure pipe being incorrectly routed.

Fix: Recall the vehicle that are likely to be affected to ensure the waste gate pipe is correctly routed and fixed in the appropriate clips.

364 vehicles · built 1 Jul 2007 to 30 Apr 2008

Due to the possibility of a fault in the production process the flexible rubber brake hoses may not have been correctly vulcanised. As a consequence may partially or totally restrict the internal flow of the brake hydraulic fluid. Should this happen a reduction in efficiency during braking would occur.

Fix: Recalled vehicles will have the hoses checked to identify if they are within the affected batch. If this is the case they will be replaced with quality assured items.

4,804 vehicles · built 12 Oct 2007 to 14 Nov 2007

Due to the possibility of a fault in the production process the flexible rubber brake hoses may not have been correctly vulcanised. As a consequence may partially or totally restrict the internal flow of the brake hydraulic fluid. Should this happen a reduction in efficiency during braking would occur.

Fix: Recalled vehicles will have the hoses checked to identify if they are within the affected batch. If this is the case they will be replaced with quality assured items.

4,804 vehicles · built 16 Oct 2007 to 14 Nov 2007

Due to the possibility of a fault in the production process the flexible rubber brake hoses may not have been correctly vulcanised. As a consequence may partially or totally restrict the internal flow of the brake hydraulic fluid. Should this happen a reduction in efficiency during braking would occur.

Fix: Recalled vehicles will have the hoses checked to identify if they are within the affected batch. If this is the case they will be replaced with quality assured items.

336 vehicles · built 16 Oct 2007 to 14 Nov 2007

Due to the possibility of a fault in the production process the flexible rubber brake hoses may not have been correctly vulcanised. As a consequence may partially or totally restrict the internal flow of the brake hydraulic fluid. Should this happen a reduction in efficiency during braking would occur.

Fix: Recalled vehicles will have the hoses checked to identify if they are within the affected batch. If this is the case they will be replaced with quality assured items.

4,804 vehicles · built 6 Nov 2007 to 19 Nov 2007

Due to the possibility of a fault in the production process the flexible rubber brake hoses may not have been correctly vulcanised. As a consequence may partially or totally restrict the internal flow of the brake hydraulic fluid. Should this happen a reduction in efficiency during braking would occur.

Fix: Recalled vehicles will have the hoses checked to identify if they are within the affected batch. If this is the case they will be replaced with quality assured items.

4,804 vehicles · built 7 Nov 2007 to 14 Nov 2007

Due to the possibility of a fault in the production process the flexible rubber brake hoses may not have been correctly vulcanised. As a consequence may partially or totally restrict the internal flow of the brake hydraulic fluid. Should this happen a reduction in efficiency during braking would occur.

Fix: Recalled vehicles will have the hoses checked to identify if they are within the affected batch. If this is the case they will be replaced with quality assured items.

4,804 vehicles · built 11 Oct 2007 to 27 Oct 2007

It has been identified that; due to a possible lack of lubricant between the steering rack and pinion the steering may become increasingly stiff to operate. This can eventually lead to damage to the steering rack teeth. As a consequence the steering operation of the vehicle may become increasingly difficult.

Fix: Recalled vehicles will have the steering rack inspected for damage. If no damage is evident the rack and pinion will be lubricated. Should any damage be in evidence the steering rack will be replaced.

5,427 vehicles · built 1 Jul 2006 to 30 Jun 2007

There is a possibility that corrosion may be present near the welds for the front suspension arm front mountings on the front cross member.Should this be the case in time this could lead to noise whilst driving and the possibility that the weld could fail. Failure of the weld may lead to loss of vehicle stability.

Fix: Recalled vehicle will be checked to ascertain whether corrosion is present near the front suspension mountings. If this is found to be the case the front cross member will be replaced. If corrosion is not present a front cross member strengthening kit will be fitted.

793 vehicles · built 1 May 2005 to 30 Sep 2005

It has been identified that due to manufacture from an incorrect material the tyre inflation valve may break. Should this occur rapid deflation of the tyre and possible vehicle instability would occur.

Fix: Recalled vehicles will have the tyre inflation valve replaced on all steel wheels including the spare.

368 vehicles · built 1 Aug 2007 to 30 Sep 2007

It has been identified that the possibility exists that water may ingress into the front windscreen wiper motor. Should this occur the wipers may become inoperative. In conditions of poor visibility this may result in impaired driver visibility.

Fix: Recalled vehicles will have the front windscreen wiper motor fitted with a protective cover.

3,253 vehicles · built 1 Jul 2006 to 31 Dec 2006

It has been identified that the front anti-roll bar bushes may wear after a period of time. Should this occur noise will be generated by contact between the anti-roll bar and the metal sleeve of the bush.

Fix: Recalled vehicles will have the front anti-roll bar replaced.

867 vehicles · built 1 Jun 2007 to 30 Jun 2007

The possibility exists that the swivel joint stem of the front suspension vertical links maybe of an incorrect size. This can lead to the generation of noise whilst driving and the possibility of suspension disconnection following a violent impact to the front axle and subsequent loss of vehicle control.

Fix: Recalled vehicles will have the swivel joint stems checked for the presence of play and will be replaced if any is found.

198 vehicles · built 1 Jan 2007 to 31 Jan 2007

It has been identified that due to the inlet filter for the exhaust gas recirculating valve (EGR) being in an exposed position there is a possibility of water entering the brake servo vacuum pipe. This can give rise to the possibility of ice forming within the pipe during periods of low ambient temperature with the possibility of reduced brake servo assistance.

Fix: Recalled vehicles will have the EGR valve solenoids checked for the presence of separate air filters. If this is not the case new solenoids with separate filters will be fitted.

2,986 vehicles · built 1 Aug 2002 to 31 Dec 2004

Fuel delivery pipe adjacent to air filter may chafe. This in time could lead to leakage of fuel in the engine compartment and a consequent risk of fire.

Fix: Recall the vehicles that are likely to be affected to replace the fuel delivery pipe and where necessary replace the pipe containment channel.

919 vehicles · built 1 Jul 2005 to 31 Jan 2006

Due to the inlet filter for the EGR valve being in an exposed position there is a possibility of water entering the brake servo vacuum pipe. This could result in the possibility of ice forming in the brake servo vacuum pipe in conditions of low ambient temperature. As a consequence this may lead to reduced servo assistance to the braking system.

Fix: Recalled vehicles will have the EGR solenoids checked for the presence of separate air filters. If theses are not evident new solenoids with separate air filters will be fitted.

4,535 vehicles · built 1 Jul 2001 to 31 Jan 2005

Incorrect profile (flaring) of the end of the steering shaft at the upper steering column universal joint. This may give the possibility of the steering column becoming disconnected from the universal joint with a consequent loss of vehicle steering.

Fix: Recall the vehicles that are likely to be affected to inspect the profile and flaring of the end of the steering shaft at the upper universal joint and where necessary renew the shaft.

5,638 vehicles · built 1 Jun 2006 to 31 Jul 2006

It has been identified that the possibility exists that a disconnection of the handbrake cable may occur which can result in the handbrake becoming inefficient.

Fix: Recalled vehicles will have the fitment of the handbrake cable to the actuating lever checked. If found to be incorrect the situation will be rectified. If the handbrake cable is found to be damaged it will be replaced.

1,479 vehicles · built 1 Feb 2006 to 31 Dec 2006

It is possible that breakage of the ancillary devices pulley on the crankshaft may occur. Should this happen there is the possibility that engine power and functions such as power assisted steering and braking assistance may be lost.

Fix: Recalled vehicles will have the crankshaft pulley inspected and changed should this be necessary.

1,474 vehicles · built 1 May 2006 to 31 May 2006

It is possible that breakage of the ancillary devices pulley on the crankshaft may occur. Should this happen there is the possibility that engine power and functions such as power assisted steering and braking assistance may be lost.

Fix: Recalled vehicles will have the crankshaft pulley inspected and changed should this be necessary.

1,474 vehicles · built 1 May 2006 to 31 May 2006

It is possible that breakage of the ancillary devices pulley on the crankshaft may occur. Should this happen there is the possibility that engine power and functions such as power assisted steering and braking assistance may be lost.

Fix: Recalled vehicles will have the crankshaft pulley inspected and changed should this be necessary.

1,474 vehicles · built 1 May 2006 to 31 May 2006

It is possible that breakage of the ancillary devices pulley on the crankshaft may occur. Should this happen there is the possibility that engine power and functions such as power assisted steering and braking assistance may be lost.

Fix: Recalled vehicles will have the crankshaft pulley inspected and changed should this be necessary.

1,474 vehicles · built 1 May 2006 to 31 May 2006

It is possible that breakage of the ancillary devices pulley on the crankshaft may occur. Should this happen there is the possibility that engine power and functions such as power assisted steering and braking assistance may be lost.

Fix: Recalled vehicles will have the crankshaft pulley inspected and changed should this be necessary.

1,474 vehicles · built 1 May 2006 to 31 May 2006

It has been identified that the possibility exists that breakage of the dropside hinge fastening plate may occur on vehicles fitted with a factory installed dropside body. This can result in the detachment of the dropside panel.

Fix: Subject vehicles will be recalled at which time the hinge fastening plates will be changed.

29 vehicles · built 1 May 2006 to 31 Jul 2006

Due to the incorrect profiling of a rigid fuel pipe at the quick fit connection with the flexible fuel pipe for the injection manifold. The possibility exists that a fuel leak may develop at the connector and result in a fire in the engine compartment.

Fix: Recalled vehicles will have a locking insert fitted within the quick fit connector in order to prevent the connector from becoming loose.

14 vehicles · built 1 Jun 2006 to 31 Oct 2006

It has been identified that the chassis front cross member may have a weld which does not conform to specification. This may lead to a creaking noise being heard under braking and could in time lead to the cross member cracking in the area of it's mounting to the vehicle's body.

Fix: Recalled vehicles will have the front cross member replaced.

45 vehicles · built 1 Mar 2005 to 31 Mar 2005

Under environmental conditions that require the intensive use of salt on the roads corrosive deposits may infiltrate the rubber plate which supports the front suspension springs initiating seats of corrosion which may lead to the spring breaking after a period of time.

Fix: To avoid damage to a tyre in the event of spring breakage a plate will be fitted which will contain the spring.

44,221 vehicles · built 1 Oct 2001 to 30 Sep 2006

There is a possibility that the weld on the steering shaft at the lower universal joint fitting maybe absent. If there is an absent of the weld at the joint this may lead to a loss of steering.

Fix: Recall affected vehicles and inspect steering shaft to ensure weld is present if not renew steering shaft.

559 vehicles · built 1 Mar 2006 to 30 Apr 2006

The U bolts securing the leaf spring to the rear axle may not have been tightened to the correct torque. This may result in the U bolts breaking.

Fix: Recalled vehicles will have the U bolts checked to ensure there is no damage and that they have been tightened to the correct torque.

117 vehicles · built 1 Jan 2006 to 28 Feb 2006

It may be possible for the handbrake cable to foul the rigid brake pipe at the right hand rear suspension arm. In time this could lead to wear of the rigid brake pipe and as a consequence there maybe a loss of brake fluid and longer stopping distances.

Fix: Recall the vehicles that are likely to be affected to check the routing of the handbrake cable and fit rubber pads to the rigid brake pipe to prevent fouling.

2,278 vehicles · built 1 Apr 2002 to 28 Feb 2003

Under environmental conditions that require intensive use of salt on the roads corrosive deposits accumulate inside the noise-insulating protective sheath located on the front suspension springs creating areas of corrosion which may lead to the spring breaking after a period of time.

Fix: Recall the vehicles that are likely to be affected and replace the front coil springs with those of a new type.

10,276 vehicles · built 1 May 1999 to 31 Dec 2004

It is possible for the fastenings of the sound deadening guard to become loose. Consequently the guard could become detached whilst the vehicle is in motion.

Fix: Recall the vehicles that are likely to be affected and replace all the fastenings with new captive fasteners and bolts.

2,860 vehicles · built 1 Jan 2002 to 30 Nov 2004

The air conditioning condenser drainpipe may in some instances become blocked with the possibility that the condensate may leak into the passenger compartment and the air bag central control unit. This contamination may cause the air bag warning light to illuminate and in some cases; cause inadvertent activation of the air bag.

Fix: Likely to be affected vehicles will be recalled at which time the condensate drainpipe will be refitted; and re-profiled to remove any restriction.

3,047 vehicles · built 1 Jan 2002 to 31 Jul 2004

In some cases due to the non-compliance of the engine ECU software the engine failure warning lamp may illuminate. As a consequence the vacuum assistance available to the braking system may be reduced.

Fix: Recall affected vehicles and re-programme the engine ECU with updated software.

340 vehicles · built 1 Aug 2003 to 31 Jul 2004

In some cases due to the non compliant routing of the brake servo vacuum supply pipe damage to the pipe may occur with the possibility that braking assistance might be reduced.

Fix: Recalled vehicles will have the subject pipe checked and re-routed. Should any damage be found the pipe will be replaced.

171 vehicles · built 1 Feb 2005 to 28 Feb 2005

Excess play between steering rack and pinion leading to noise and possible loss of steering when parking.

Fix: Recalled vehicles will have the steering pinion bearing preload adjusted or the steering rack assembly will be replaced as necessary

3,030 vehicles · built 1 Jan 2002 to 1 Dec 2003

Excess play between steering rack and pinion leading to noise and possible loss of steering when parking.

Fix: Recalled vehicles will have the steering pinion bearing preload adjusted or the steering rack assembly will be replaced as necessary

3,030 vehicles · built 1 Jan 2002 to 1 Dec 2003

The rear seat belt anchorage points do not conform to specification which could in the event of a collision result in the insecurity of the seat belt.

Fix: Recall likely to be affected vehicles and upgrade the seat belt anchorage to the correct specification by the fitment of an additional bracket.

1,690 vehicles · built 11 Mar 2004 to 4 Apr 2004

The brake hoses may chafe on the wheel aches and in extreme cases cause a brake fluid leak. The driver will be informed of the defect by the illumination of a warning lamp on the dashboard. If ignored then this will result in longer than expected stopping distances.

Fix: Recall the affected vehicles and visually inspect the front brake hoses reinforcement and protection. The brake hoses if worn will be replaced.

4,322 vehicles · built 4 Jan 2004 to 12 Mar 2004

Possibility that the accelerator may foul on the floor mounted pedal stop

Fix: Recall likely to be affected vehicles and fit a modified throttle pedal stop.

3,770 vehicles · built 1 Jul 2001 to 1 Apr 2003

Possibility of fuel leakage from the fuel tank due to corrosion

Fix: Likely to be affected vehicles will be recalled during which time the fuel tank will be inspected for corrosion. Should corrosion be found the fuel tank will be replaced.

16,382 vehicles · built 1 Mar 1998 to 1 Sep 1999

Offside front brake hose may chafe

Fix: Recall affected vehicles check and fit new pipe if necessary

97 vehicles · built 1 Mar 2003 to 30 Apr 2003

Front hub nut security pin may have been incorrectly fitted.

Fix: Recall affected vehicles check for correct fitment of pin and replace if necessary

31 vehicles · built 1 Feb 2003 to 30 Apr 2003

Electric Sliding door may open inadvertently.

Fix: Recall affected vehicles and check and upgrade door control system ECU.

29 vehicles · built 1 Mar 2002 to 31 Dec 2002

The lower engine stabiliser rod may crack or break. This could result in detachment of the off side drive shaft on full lock.

Fix: Inspect the stabiliser rod welding and fit a new rod where found necessary.

103 vehicles · built 1 Apr 2003 to 30 Apr 2003

Water ingress into the airbag control unit (ECU) could result in illumination of the warning light and in the worst case unintentional deployment of the airbag.

Fix: Seal the airbag ECU compartment

45 vehicles · built 1 Mar 2002 to 31 Dec 2002

Front hub nut security pin may have been incorrectly fitted.

Fix: Recall affected vehicles check for correct fitment of pin and replace if necessary

31 vehicles · built 1 Feb 2003 to 30 Apr 2003

It is possible for the side window air bags to deploy unintentionally.

Fix: Replace the air bag central control unit.

566 vehicles · built 1 Oct 2001 to 31 Oct 2002

A short circuit may occur in the engine cooling fan control unit with a resultant risk of overheating.

Fix: Fit a new cooling fan control unit.

230 vehicles · built 1 Dec 2001 to 31 Mar 2002

The interior fan wiring may chafe on a dashboard support. This could result in a short circuit and a fire in the fan unit.

Fix: Fit additional insulation and protection to the fan electrical wiring.

1,634 vehicles · built 1 May 2001 to 30 Apr 2002

The road wheel fixing bolts may not have been correctly torqued and could loosen over a period of use.

Fix: Check the wheel fixing bolts for correct torque and tighten or renew as appropriate.

414 vehicles · built 12 Oct 2002 to 23 Nov 2002

Water may enter the ABS (antilock brake) control unit through a harness connector. This will cause the ABS control unit to malfunction and the fault warning lamp to illuminate.

Fix: Fit a new ABS wiring harness which has watertight connectors.

19 vehicles · built 1 May 2002 to 30 Apr 2002

There is a possibility that the control solenoids may not function in very cold temperatures resulting in loss of servo assistance.

Fix: Recall affected vehicles and replace control solenoids and fit weather shield.

566 vehicles · built 1 Jan 2001 to 17 Jul 2002

There is a possibility that the control solenoids may not function in very cold temperatures resulting in loss of servo assistance.

Fix: Recall affected vehicles and replace control solenoids and fit weather shield.

566 vehicles · built 1 Jan 2001 to 17 Jul 2002

The electrical wiring loom may chafe on the steering column and cause the unintentional deployment of the drivers air bag.

Fix: Check wiring loom for damage and reposition it clear of the steering column.

1,522 vehicles

The handbrake cable may have been incorrectly fitted and could become disconnected from the rear brake mechanism. This would result in the handbrake becoming ineffective.

Fix: Check that the handbrake cable is correctly connected to the rear brake mechanism and fit a new cable where it is not.

186 vehicles

The accelerator pedal may foul on its travel limiting stop and prevent the engine from decellerating when the pedal is released.

Fix: Fit a modified pedal travel limiting stop.

1,377 vehicles

There is a possibility that due to an incorrect specification the steering arms when subjected to unusual stress such as an impact may break.

Fix: Recall affected vehicles and replace steering arms with correct specification type.

302 vehicles · built 1 Jan 2001 to 31 Dec 2001

There is a possibility that due to an incorrect specification the steering arms when subjected to unusual stress such as an impact may break.

Fix: Recall affected vehicles and replace steering arms with correct specification type.

302 vehicles · built 1 Jan 2001 to 31 Dec 2001

Possible water ingress into the electronic control unit (ECU) could result in unintentional deployment of the drivers air bag and passengers air bag where fitted.

Fix: Recall affected vehicles check for water ingress into the ECU and replace if necessary. Fit water protection to the ECU in all cases.

5,168 vehicles · built 1 Jan 1994 to 31 Dec 1995

Prolonged exposure to the effects of road salt corrosion may result in perforation of the metal brake pipes and a consequential loss of braking efficiency.

Fix: Replace corroded brake pipes and apply corrosion prevention treatment to all brake pipes.

248,486 vehicles · built 1 Jan 1993 to 31 Dec 1997

The power assisted steering low pressure pipe may chafe on a hose clip. This could result in the loss of the hydraulic fluid and power assistance of the steering.

Fix: Check the steering low pressure hydraulic pipe for damage and reposition the hose clip where necessary.

87 vehicles

Brake vacuum pump drive coupling dog may fail as a result of breakage. This could result in a loss of power assistance at the brake pedal.

Fix: Recall affected vehicles to fit a quality assured replacement drive pin to the vacuum pump.

2,318 vehicles · built 1 Jan 1999 to 30 Jun 2000

Fuel tank rear mountings may not inadequately secure the tank with a risk of possible disengagement.

Fix: Recall affected vehicles and fit reinforcement plates to rear tank mountings.

5,348 vehicles · built 1 Aug 1999 to 31 Mar 2000

Possible chafing of front rigid brake pipes at near side front against the plastic wheel arch liner or against the gearbox mounting. Also at the off side front against the engine timing belt cover.

Fix: Reposition any chafing brake pipe to comply with the manufacturer's prescribed clearance between adjacent parts. Renew any brake pipe that has been chafed beyond a serviceable condition.

1,084 vehicles · built 1 Jan 1998 to 31 Dec 1999

The fuel vapour re-circulation pipe could foul against the air-conditioning compressor pulley resulting in possible damage to the pipe and the risk of fire.

Fix: Recall affected vehicles and reposition re-circulation pipe away from compressor pulley.

2,016 vehicles · built 1 Aug 1999 to 30 Jun 2000

The fuel vapour re-circulation pipe could foul against the air-conditioning compressor pulley resulting in possible damage to the pipe and the risk of fire.

Fix: Recall affected vehicles and reposition re-circulation pipe away from compressor pulley.

2,016 vehicles · built 1 Aug 1999 to 30 Jun 2000

There is a possibility that the brake pedal is of incorrect specification and could eventually fracture.

Fix: Recall affected vehicles and replace brake pedal with quality assured type.

292 vehicles · built 1 Jul 1999 to 31 Aug 1999

The anti noise plastic shields fitted to the bottom of the front suspension coil springs may permit the accumulation of a high level of humidity under certain environmental conditions. When combined with the presence of salt and small stones etc. this condition may cause breakage of the spring(s) and subsequent tearing of the tyre as a result of the fractured coils contacting the tyre wall.

Fix: Affected vehicles are being recalled for the fitment of a modified ventilated spring sheath and inspection of the front coil springs.

2,466 vehicles · built 1 Jan 1993 to 31 Dec 1996

On some Punto vehicles it has been found that the seat belt pre-tensioners may fail to activate although normal activation of the seat belt is assured.

Fix: Recall affected vehicles to shorten the safety tabs in the inertia reel.

24,504 vehicles · built 1 Mar 1997 to 30 Nov 1997

On some Punto vehicles it has been found that the seat belt pre-tensioners may fail to activate although normal activation of the seat belt is assured.

Fix: Recall affected vehicles to shorten the safety tabs in the inertia reel.

24,504 vehicles · built 1 Mar 1997 to 30 Nov 1997

On batteries fitted with non-watertight caps rainwater from the windscreen may run into the battery and result in a leakage of battery contents. This leakage may damage the adjacent fabric reinforced rubber brake servo pipe and reduce or cancel the servo assistance available when braking.

Fix: Affected vehicles are being recalled to have a cover fitted to the battery and checking of the brake servo pipe for damage.

448 vehicles · built 1 Jan 1994 to 31 Dec 1996

A defective retaining clip may allow the throttle cable to chafe against certain rigid brake pipes. This could damage the pipes and result in a reduction in braking efficiency.

Fix: Affected vehicles are being recalled to have the subject retaining clip replaced with a modified version.

378 vehicles

A defective retaining clip may allow the throttle cable to chafe against certain rigid brake pipes. This could damage the pipes and result in a reduction in braking efficiency.

Fix: Affected vehicles are being recalled to have the subject retaining clip replaced with a modified version.

378 vehicles

On certain vehicles it is possible that the power steering high pressure hose may contact the offside front rigid brake pipe. This could result in damage to the brake pipe with a resultant reduction in braking efficiency.

Fix: Affected vehicles are being recalled for a check on the positioning of the pipes involved and adjustment of the pipe clearance where necessary.

1,282 vehicles · built 31 Dec 1996 to 30 Jun 1997

After extended high speed running brake servo assistance may be lost due to petrol contamination of the servo diaphragm.

Fix: The affected vehicles are being recalled for replacement of the servo brake vacuum pipe and checking of the brake servo efficiency.

1,090 vehicles · built 1 Nov 1996 to 30 Apr 1997

A number of the subject vehicles have been fitted with seat belts manufactured by TRW the attachment systems of which may not remain secure in an accident situation.

Fix: Recall the affected vehicles check the date of production on the seat belt buckles and replace those within the critical batch.

12 vehicles

On ABS equipped Punto vehicles contact may take place between the brake compensator springs and the rear (metal) brake pipes. This could damage the pipes causing loss of brake fluid and reducing the efficiency of the service brake.

Fix: Recall the affected vehicles and secure the subject brake pipes to eliminate the possibility of any contact with the compensator springs. Any brake pipes found to be damaged will be replaced.

695 vehicles · built 1 Feb 1994 to 30 Jun 1995

On ABS equipped Punto vehicles contact may take place between the brake compensator springs and the rear (metal) brake pipes. This could damage the pipes causing loss of brake fluid and reducing the efficiency of the service brake.

Fix: Recall the affected vehicles and secure the subject brake pipes to eliminate the possibility of any contact with the compensator springs. Any brake pipes found to be damaged will be replaced.

695 vehicles · built 1 Feb 1994 to 30 Jun 1995

On ABS equipped Punto vehicles contact may take place between the brake compensator springs and the rear (metal) brake pipes. This could damage the pipes causing loss of brake fluid and reducing the efficiency of the service brake.

Fix: Recall the affected vehicles and secure the subject brake pipes to eliminate the possibility of any contact with the compensator springs. Any brake pipes found to be damaged will be replaced.

695 vehicles · built 1 Feb 1994 to 30 Jun 1995

Some vehicles with alloy wheels may have been supplied with an unsuitable space saver spare wheel. If fitted this spare wheel could cause interference with braking system components.

Fix: Recall the affected vehicles and replace any unsuitable spare wheels with correctly specified versions.

239 vehicles · built 1 Mar 1994 to 31 Mar 1995

Some vehicles with alloy wheels may have been supplied with an unsuitable space saver spare wheel. If fitted this spare wheel could cause interference with braking system components.

Fix: Recall the affected vehicles and replace any unsuitable spare wheels with correctly specified versions.

239 vehicles · built 1 Mar 1994 to 31 Mar 1995

A specific batch of vehicles have been equipped with front suspension coil springs which may suffer from localised corrosion. This can cause breakage of the springs with an adverse effect on vehicle control.

Fix: Recall the affected vehicles and replace the original coil springs with quality assured examples.

4,594 vehicles · built 1 Sep 1988 to 30 Nov 1988

A specific batch of vehicles have been equipped with front suspension coil springs which may suffer from localised corrosion. This can cause breakage of the springs with an adverse effect on vehicle control.

Fix: Recall the affected vehicles and replace the original coil springs with quality assured examples.

4,594 vehicles · built 1 Sep 1988 to 30 Nov 1988