Mercedes-Benz Sprinter 910 recalls

On affected vehicles the weld points of a reinforcement in the right B-pillar may not correspond to the specifications. In this case the reinforcement in the B-pillar may work loose over time and fail to transmit the belt forces to the B-pillar as intended. This would increase the risk of injury in the event of an accident.

Fix: Rework the B-Pillar on the affected vehicles if necessary.

701 vehicles · built 23 May 2023 to 28 Jun 2023

On affected vehicles the fuse layout of the interior blower might not meet the requirements for permanent operation under the highest blower level.

Fix: Replace the fuse and its supply line and relocate the fuse.

44,028 vehicles · built 22 Mar 2018 to 2 Dec 2019

The software of the rear-view camera on certain vehicles might not meet specifications.

Fix: Update the software of the rear-view camera of the affected vehicles.

4,092 vehicles · built 27 Apr 2018 to 28 Aug 2020

On certain vehicles the behaviour of the emergency call system might not meet specifications.

Fix: Update the software of the HERMES communication module for the emergency call system on the affected vehicles

2,533 vehicles · built 12 Apr 2018 to 2 Dec 2020

The brake hose of the front axle could touch and chafe the wheel housing interior lining.

Fix: Exchange the brake hoses on the front axle on the affected vehicles with a revised version.

3,138 vehicles · built 22 Mar 2018 to 19 Mar 2020

Possible damage and short circuit of the glow plug relay in certain collision scenarios

Fix: Retrofit a housing for the glow plug relay and install a pyrotechnic fuse on the affected vehicles

9,372 vehicles · built 4 Apr 2018 to 25 Mar 2020

Electric lines routed near the frame for the rotating seats may get jammed and thus be damaged.

Fix: Correct the routing of the wiring harnesses of the rotating seats on the affected vehicles.

270 vehicles · built 31 Oct 2018 to 14 Nov 2019

The operating manual does not correctly specify certain conditions under which the automatic parking function (Auto-P) of the automatic gearbox operates.

Fix: Add a supplementary booklet with a correct description of the Auto-P function to the operating manual.

6,475 vehicles · built 4 Apr 2018 to 22 Aug 2019

A weld seam on the seat height adjustment mechanism may not have been carried out in accordance with specifications

Fix: Replace the seat-frame bases of the front seats in the affected vehicles

4 vehicles · built 2 Nov 2018 to 5 Nov 2018

The rear axle steel leaf springs may not meet all requirements for strength during operation

Fix: Check if the rear axle springs on the affected vehicles are a part of an affected production batch and replace them if necessary

1,153 vehicles · built 17 May 2018 to 10 Dec 2018

Main beam not deactivating automatically with 'High-Beam Assist'

Fix: Update the software for the signal acquisition and actuation module on the affected vehicles.

44 vehicles · built 6 Nov 2017 to 19 Mar 2019

The bolted connection between the steering shaft and steering gear may have been fitted with a bolt of the wrong length.

Fix: Vehicles to be checked to confirm if the correct bolt is installed and replace it if this was not the case.

7 vehicles · built 17 Sep 2018 to 18 Sep 2018

An incorrect operating lever might have been installed to the door locks on the right side of the vehicle.

Fix: Door locks are to be checked and replaced if necessary.

437 vehicles · built 6 Jul 2018 to 29 Oct 2018

The post-collision brake function within the Electronic Stability Programme was not activated during production.

Fix: The Electronic Stability Program control unit software will be updated to the latest version.

149 vehicles · built 6 Apr 2018 to 1 Jun 2018

Driver support and assistant functions are not active or available in the ESP control unit due to a software error.

Fix: The software of the ESP control unit will be up-dated with the latest version.

37 vehicles · built 24 May 2018 to 13 Jun 2018

The backlight illumination of the hazard warning push button switch is deactivated after approximately 20 minutes driving.

Fix: Software in the control unit will be updated with the latest version.

770 vehicles · built 6 Apr 2018 to 1 Jun 2018