Polaris Slingshot 3-Wheel Motorcycle recalls

Excess current may lead to terminal damage

Fix: Reposition the main chassis fuse

25 vehicles · built 15 May 2014 to 25 Apr 2016

The backup camera could fail internally and cause the fuse for the rear lights to blow.

Fix: Inspect the camera version and replace if necessary.

21 vehicles · built 15 May 2014 to 8 Oct 2015

Driver-side and passenger-side seatbase frames may have been improperly manufactured Driver-side seatbase frames may also contain a seat slider defect.

Fix: Frames on affected vehicles will be checked and if necessary replaced.

23 vehicles · built 22 Apr 2014 to 26 Feb 2018

1. It is possible during production the brake pressure switch (brake light switch) may have been over torqued. This could result in a loss of brake fluid and subsequent reduction in braking performance which could cause a collision. 2. It is possible during production the fuel pipe may have been placed to close too the hood which resulted in insufficient clearance between the two. This could result in the abrasion of the fuel pipe which could leak. If this happens in the presence of an ignition source there will be a risk of fire. 3. It has been identified that the suspension swinging arm may not have been manufactured to the correct specification which affects its strength and could cause it to fail. If this occurs the directional control of the machine could be affected.

Fix: Recall all the affected machines to inspect check and if required replace the defective components.

14 vehicles · built 22 Apr 2014 to 26 Sep 2016