Triumph Daytona recalls

The rear suspension unit has a possible assembly defect in that the piston-shaft nut has in some cases not been correctly tightened. If a defective suspension unit is fitted there could be an oil leak and a gradual loss of damping control which over time can adversely affect the handling of the machine.

Fix: Recall the machines that are likely to be affected and replace the rear suspension unit.

403 vehicles · built 1 Jan 2014 to 1 Apr 2015

The ABS might not operate although no Malfunction Indicator Lamp illuminates. This is due to a non conformity during the manufacturing process. The brakes will function albeit without the ABS capability.

Fix: Recall the machines that are likely to be affected to replace the modulator unit.

1,089 vehicles · built 1 Jul 2012 to 1 Jun 2013

Insufficient guidance of the throttle cable in the headstock area can result in the throttle cable being trapped in the steering lock stop causing damage to the throttle cable which impedes its operation.

Fix: Recall the vehicles that are likely to be affected to check the throttle cable and replace as necessary. Fit a wire guide to control the routing of the cable.

438 vehicles · built 1 Jun 2012 to 30 Nov 2012

It has been identified that the material for the front and rear indicator mounting stems have been manufactured from the incorrect material. This can result in the mounting stem failing and in extreme cases could allow the indicator to detach.

Fix: Recall all affected machines and replace the front and rear indicator mounting stems

3,814 vehicles

Premature wheel bearing wear/play can occur as the bearings may not be manufactured to specification.

Fix: Recall the machines that are likely to be affected to replace the affected wheel bearings.

• DAYTONA: 427 vehicles · built 20 Jul 2010 to 31 Aug 2010
• DAYTONA: 427 vehicles · built 20 Aug 2011 to 21 Sep 2011
• DAYTONA: 427 vehicles · built 22 Aug 2011 to 5 Sep 2011
• DAYTONA: 427 vehicles · built 20 Aug 2011 to 29 Aug 2011
• DAYTONA: 427 vehicles · built 25 Aug 2011 to 14 Sep 2011

The engine may stall due to a nonconformity in the with the regulator rectifier.

Fix: Recall the machines that are likely to be affected to replace the regulator rectifier with a revised component.

8,603 vehicles · built 30 Sep 2005 to 9 Jun 2010

An unexpected stalling of the engine may lead a rider to lose control of the motorcycle.

Fix: Improve security of the fly lead from the main harness.

431 vehicles · built 16 Sep 2010 to 9 Sep 2011

The rear brake caliper anti-rotation device (stop bolt) may shear. If this occurs the caliper will strike the swinging arm.

Fix: Recall the motorcycles that are likely to be affected to remove the original stop bolt and replace for a modified bolt

1,096 vehicles

The coolant by-pass hose may split causing loss of coolant from the engine resulting in possible engine overheating damage and seizure.

Fix: Recall the machines that are likely to be affected and fit a modified hose.

699 vehicles · built 1 Dec 2004 to 30 Apr 2005

If brake pedal is adjusted from its nominal position and rear brake pedal clevis pin end float taken up to offside of bike clevis pin clip may foul top edge of control plate thereby applying some degree of rear brake drag. Rear brake drag may apply rear brake.

Fix: Recall affected machines and replace clevis pin circlip with modified type

330 vehicles · built 1 Mar 2002 to 31 May 2003

Rear wheel bearings from a particular supplier may fail seize up and lock the wheel causing loss of control of the motorcycle.

Fix: Fit new rear wheel bearings from a different supplier source.

1,424 vehicles · built 1 Mar 2001 to 31 Mar 2002

In some extreme cases oil can weep from between the engine crankcase halves due to slackening of the securing bolts. This seepage occurs forward of the rear tyre and may in extreme cases cause vehicle instability.

Fix: Recall affected machines and replace the original lower crankcase bolts with quality assured bolts.

1,683 vehicles · built 1 Nov 1998 to 31 Mar 1999

Fuel leakage may occur between the fuel tank body and the fuel pump mounting plate.

Fix: The affected machines are being recalled for the fitment of a modified seal between the tank and the fuel pump mounting plate.

962 vehicles · built 1 Nov 1996 to 31 Mar 1997