Skip to content
My MOT CheckerSources

1,962 tests in 2025

Audi Sq5 reliability and MOT pass rate

91.7% passed first time. The 8.3% fail rate is 14.3 points better than the all-car average, on a median example 5 years old with 43,325 miles.

MOT pass rates / Audi

Pass rate

91.7%

22.6% of all cars failed; 8.3% of these did.

Fixed on the day

0.9%

Passed after a defect was put right during the visit.

Median at test

43,325 mi

5 years old.

Fail rate by age

Age at testTestsFail rate
3-5 years1,3306.2%
6-9 years129—
10-13 years47415%
14+ years0—

What the Sq5 fails on

Share of failed tests with at least one fail item in each DVSA inspection section. A test can fail in several sections at once.

  1. Tyres74 dangerous42.3%
  2. Suspension4 dangerous23.3%
  3. Brakes21 dangerous19%
  4. Lamps, reflectors and electrical equipment9.8%
  5. Visibility8%
  6. Identification of the vehicle6.1%
  7. Noise, emissions and leaks4.9%
  8. Body, chassis, structure1 dangerous3.7%

The exact defects that fail it

Every failure item DVSA recorded against a Sq5 in 2025, counted by how many tests each one appeared on.

  1. 1Condition: has a cut in excess of the requirements deep enough to reach the ply or cords26 tests
  2. 2Pins and bushes: pin or bush excessively worn17 tests
  3. 3Brake pads: less than 1.5 mm thick17 tests
  4. 4Tread depth: tread depth below requirements of 1.6mm17 tests
  5. 5Coil spring: fractured or broken13 tests
  6. 6Condition: has ply or cords exposed12 tests
  7. 7Condition: has a bulge, caused by separation or partial failure of its structure11 tests
  8. 8Registration plates: does not conform to the specified requirements9 tests

What wears out first

Advisories are the tester flagging wear that is still legal. A typical Sq5 collects 2.15 of them per test, and these are the ones that come up most. Treat it as the running-repairs list for the next year or two.

  1. 1Tread depth: tread depth below requirements of 1.6mm216 tests
  2. 2Brake discs: in such a condition that it is seriously weakened133 tests
  3. 3Brake pads: less than 1.5 mm thick123 tests
  4. 4Pins and bushes: pin or bush excessively worn93 tests
  5. 5Brake discs: significantly and obviously worn48 tests
  6. 6Non-component advisories: Nail in tyre43 tests
  7. 7Non-component advisories: Child Seat fitted not allowing full inspection of adult belt35 tests
  8. 8Condition: has a cut in excess of the requirements deep enough to reach the ply or cords30 tests

Questions

What is the Audi Sq5 MOT pass rate?

91.7% of the 1,962 Audi Sq5 first-attempt MOTs in 2025 passed. The fail rate of 8.3% compares with 22.6% across all cars. A further 0.9% passed after a defect was fixed during the test visit.

What does a Audi Sq5 usually fail on?

The single most common failure is "Condition: has a cut in excess of the requirements deep enough to reach the ply or cords", recorded on 26 failed tests, followed by "Pins and bushes: pin or bush excessively worn" and "Brake pads: less than 1.5 mm thick". By section, tyres appears in 42.3% of failures, suspension appears in 23.3% of failures, brakes appears in 19% of failures.

Does age change the odds?

Sharply. At 3 to 5 years old the fail rate was 6.2%; at 10-13 years it was 15%. The median Audi Sq5 tested in 2025 was 5 years old with 43,325 miles.

First-attempt class 4 tests, 2025, from DVSA’s anonymised MOT data (OGL v3, retrieved 2026-09-12). DVSA records newer cars trim by trim; this page adds every Sq5 trim together. Year-on-year figures come from the same DVSA extracts for 2026 and earlier years. Full method on the pass rates hub.

Other Audi models

Checking a particular Sq5?

The odds above are the model. The car in front of you has its own record: every test, every advisory, the mileage at each one.

Due a test? Find an approved MOT station near you.