McLaren recalls

On affected vehicles de-bonding of the rear polycarbonate cabin window may occur when driven at high speeds with the windows open.

Fix: Install mechanical fastenings on the tailgate polycarbonate window.

52 vehicles · built 14 Aug 2020 to 27 May 2021

On affected vehicles the anti-lock braking system (ABS) and electronic stability programme (ESP) may not function correctly due to the brake pipes being incorrectly connected into the control module.

Fix: Check pipes have been correctly connected and correct the connections if necessary.

1 vehicles · built 4 Oct 2019 to 4 Oct 2019

On affected vehicles the anti-lock braking system (ABS) and electronic stability programme (ESP) may not function correctly due to the brake pipes being incorrectly connected into the control module.

Fix: Check pipes have been correctly connected and correct the connections if necessary.

1 vehicles · built 26 Oct 2019 to 26 Oct 2019

On affected vehicles the anti-lock braking system (ABS) and electronic stability programme (ESP) may not function correctly due to the brake pipes being incorrectly connected into the control module.

Fix: Check pipes have been correctly connected and correct the connections if necessary.

2 vehicles · built 7 Mar 2023 to 4 Apr 2023

On affected vehicles the anti-lock braking system (ABS) and electronic stability programme (ESP) may not function correctly due to the brake pipes being incorrectly connected into the control module.

Fix: Check pipes have been correctly connected and correct the connections if necessary.

1 vehicles · built 13 Jul 2023 to 13 Jul 2023

On affected vehicles the anti-lock braking system (ABS) and electronic stability programme (ESP) may not function correctly due to the brake pipes being incorrectly connected into the control module.

Fix: Check pipes have been correctly connected and correct the connections if necessary.

1 vehicles · built 29 Jul 2024 to 29 Jul 2024

On affected vehicles the manual release cable of the bonnet latch assembly may have excessive tension which potentially may cause the latch to open causing an unexpected opening of the bonnet.

Fix: Replace the bonnet latch of the affected vehicles with a new bonnet latch which carries a different design.

260 vehicles · built 16 Feb 2019 to 9 Feb 2023

On certain vehicles a defective pipe within the low-pressure fuel pipe assembly can potentially become disconnected particularly during the engine start process

Fix: Do not operate the vehicle in any powertrain mode including the electric mode. Replace the low-pressure fuel pipe assembly with a new low-pressure fuel pipe assembly.

69 vehicles · built 18 Jul 2022 to 14 Nov 2023

On certain vehicles a defective pipe within the low-pressure fuel pipe assembly can potentially become disconnected particularly during the engine start process

Fix: Do not operate the vehicle in any powertrain mode including the electric mode. Replace the low-pressure fuel pipe assembly with a new low-pressure fuel pipe assembly.

Vehicle count not given · built 18 Jul 2022 to 14 Nov 2023

On affected vehicles the manufacturer has identified an issue with the hose connection in the area of the outboard right radiator where a coolant leak cannot be ruled out.�

Fix: Replace the coolant hose temperature sensor housing and clamp.�

370 vehicles · built 19 Feb 2018 to 30 Apr 2020

On affected vehicles the nut of the high-pressure fuel pipe can potentially loosen from the direct injection fuel pump leading to a fuel leak.

Fix: Replace the high-pressure fuel pipes with new pipes equipped with new 16.5mm machined nuts.

42 vehicles · built 14 Sep 2022 to 29 Nov 2022

The connection between the driver airbag and the occupant restraint controller may not been fully engaged.

Fix: Check resistance values. If necessary remove the airbag and ensure that the secondary locking tab is correctly engaged.

141 vehicles · built 16 Aug 2019 to 29 Jun 2021

The banjo bolt that is fitted between the flexi-hose and the caliper within the brake assembly on each corner of the vehicle may not function properly.

Fix: Disassemble the brake hose assembly remove the banjo bolt and inspect it. In the event the banjo bolt is defective it will be replaced. The brake hose assembly will then be reassembled and the brakes bled.

8 vehicles · built 8 Jul 2019 to 15 Mar 2020

The banjo bolt that is fitted between the flexi-hose and the caliper within the brake assembly on each corner of the vehicle may not function properly.

Fix: Disassemble the brake hose assembly remove the banjo bolt and inspect it. In the event the banjo bolt is defective it will be replaced. The brake hose assembly will then be reassembled and the brakes bled.

8 vehicles · built 8 Jul 2019 to 15 Mar 2020

The banjo bolt that is fitted between the flexi-hose and the caliper within the brake assembly on each corner of the vehicle may not function properly.

Fix: Disassemble the brake hose assembly remove the banjo bolt and inspect it. In the event the banjo bolt is defective it will be replaced. The brake hose assembly will then be reassembled and the brakes bled.

8 vehicles · built 8 Jul 2019 to 15 Mar 2020

The Noise Vibration and Harshness (NVH) foam pad underneath the fuel tank may retain moisture and corrode the fuel tank potentially causing a fuel leak

Fix: Remove the NVH foam pad from the vehicle and inspect fuel tank. Repair or replace the fuel tank if necessary.

1,411 vehicles · built 7 Oct 2016 to 26 Feb 2020

The Noise Vibration and Harshness (NVH) foam pad underneath the fuel tank may retain moisture and corrode the fuel tank potentially causing a fuel leak

Fix: Remove the NVH foam pad from the vehicle and inspect fuel tank. Repair or replace the fuel tank if necessary.

1,411 vehicles · built 1 May 2016 to 15 Mar 2019

The Noise Vibration and Harshness (NVH) foam pad underneath the fuel tank may retain moisture and corrode the fuel tank potentially causing a fuel leak

Fix: Remove the NVH foam pad from the vehicle and inspect fuel tank. Repair or replace the fuel tank if necessary.

1,411 vehicles · built 10 Aug 2019 to 13 Mar 2020

The Noise Vibration and Harshness (NVH) foam pad underneath the fuel tank may retain moisture and corrode the fuel tank potentially causing a fuel leak

Fix: Remove the NVH foam pad from the vehicle and inspect fuel tank. Repair or replace the fuel tank if necessary.

1,411 vehicles · built 26 Apr 2016 to 14 Dec 2019

The engine harness can come into contact with a metal link pipe heatshield

Fix: The harness fastening and routing will be modified.

75 vehicles · built 21 Jun 2018 to 20 Jun 2019

It is possible the Anti-Trap Feature on both the passenger and drivers door windows will not function as designed. This could result in injury in the event of normal window operation and door closing.

Fix: To re-work the electrical wire harness and switch the connectors from the left door sensor to the right door sensor and right door sensor to the left door sensor.

4 vehicles · built 1 Oct 2012 to 30 Nov 2012