Piaggio recalls

For the machines identified the headlamp is not functioning affecting either the low beam the high beam or both.

Fix: Check of the headlight and if necessary replace

3 vehicles · built 1 Jan 2026 to 30 Jan 2026

For the machines identified the headlamp is not functioning affecting either the low beam the high beam or both.

Fix: Check of the headlight and if necessary replace

1 vehicles · built 1 Jan 2026 to 30 Jan 2026

For the machines identified the headlamp is not functioning affecting either the low beam the high beam or both.

Fix: Check of the headlight and if necessary replace

23 vehicles · built 1 Jan 2026 to 30 Jan 2026

A possible non-conformity of the zinc plating surface treatment of a small component of the brake hose terminals may result in an increase in the brake lever travel.

Fix: Conduct checks of the brake lever and pedal movement and if necessary replace the brake fluid and bleed the system.

1,441 vehicles · built 22 May 2020 to 25 Nov 2020

A possible non-conformity of the zinc plating surface treatment of a small component of the brake hose terminals may result in an increase in the brake lever travel.

Fix: Conduct checks of the brake lever and pedal movement and if necessary replace the brake fluid and bleed the system.

1,441 vehicles · built 4 May 2020 to 3 Dec 2020

A possible non-conformity of the zinc plating surface treatment of a small component of the brake hose terminals may result in an increase in the brake lever travel.

Fix: Conduct checks of the brake lever and pedal movement and if necessary replace the brake fluid and bleed the system.

1,441 vehicles · built 5 May 2020 to 28 Nov 2020

Nickel coating of a brake pipe may a cause gas build up in the hydraulic system.

Fix: Test brake system and bleed or replace the brake pipe as required.

510 vehicles · built 23 May 2020 to 25 Sep 2020

Nickel coating of a brake pipe may a cause gas build up in the hydraulic system.

Fix: Test brake system and bleed or replace the brake pipe as required.

510 vehicles · built 23 May 2020 to 25 Sep 2020

Nickel coating of a brake pipe may cause a gas build up in the hydraulic system.

Fix: Test brake system and bleed or replace the brake pipe as required.

292 vehicles · built 24 Sep 2018 to 30 Oct 2019

Possible non-conformity of the zinc plating surface of the brake hose terminals

Fix: Replace hose terminal and brake fluid.

1,061 vehicles · built 3 Oct 2018 to 5 Jul 2019

Throttle may stick due to a defective bush.

Fix: Check cable replace if it does not have a smooth operation and fit a modified bush.

197 vehicles · built 13 Nov 2018 to 9 Jan 2019

Poor engine performance.

Fix: Fuel tank vent hose needs to be modified for better breathing.

84 vehicles · built 30 May 2018 to 16 Sep 2018

There is a risk of a fuel leak from the filler neck area of the fuel tank

Fix: On affected machines replace the fuel tank.

19 vehicles · built 30 Jun 2016 to 23 Sep 2016

There is a risk of a fuel leak from the filler neck area of the fuel tank.

Fix: On affected machines replace the fuel tank.

5 vehicles · built 12 Sep 2016 to 13 Sep 2016

There is a risk of a fuel leak from the filler neck area of the fuel tank.

Fix: On affected machines replace the fuel tank.

142 vehicles · built 11 Jul 2016 to 30 Nov 2016

There is a risk of a fuel leak from the filler neck area of the fuel tank.

Fix: On affected machines replace the fuel tank.

142 vehicles · built 27 Oct 2016 to 4 Nov 2016

There is a risk of a fuel leak from the filler neck area of the fuel tank.

Fix: On affected machines replace the fuel tank.

142 vehicles · built 4 Jul 2016 to 29 Nov 2016

The front brake master cylinder piston when subjected to particular shock load and vibration conditions may fail and result in the failure of the front brake. This will lead increased braking distances.

Fix: Recall the machines that are likely to be affected and fit replacement parts kit which includes piston and seals with appropriate lubrication.

650 vehicles · built 30 May 2016 to 19 Sep 2016

The front brake master cylinder piston when subjected to particular shock load and vibration conditions may fail and result in the failure of the front brake. This will lead increased braking distances.

Fix: Recall the machines that are likely to be affected and fit replacement parts kit which includes piston and seals with appropriate lubrication.

650 vehicles · built 30 May 2016 to 19 Sep 2016

The front brake master cylinder piston when subjected to particular shock load and vibration conditions may fail and result in the failure of the front brake. This will lead increased braking distances.

Fix: Recall the machines that are likely to be affected and fit replacement parts kit which includes piston and seals with appropriate lubrication.

650 vehicles · built 30 May 2016 to 19 Sep 2016

The frame of the machine may develop a crack. Should a crack develop as it gradually develops the steering and handling will get progressively worse. If not repaired the frame could beak rendering the machine uncontrollable.

Fix: Recall the machines that are likely to be affected and if no cracks are present fit a reinforcement kit. If cracks are present replace the frame.

404 vehicles · built 23 Nov 2015 to 23 Aug 2016

One or more of the front brake disc retaining screws may loosen. This may be identified by rattling and may affect the brake's efficiency. In extreme instances the brake disc could detach.

Fix: On affected machines remove the brake disc and retaining screws. If necessary replace damaged components. In all cases apply thread lock to the disc retaining screws and tighten to the correct specification.

1,083 vehicles · built 12 Jan 2015 to 28 Jun 2016

The rear brake hose could be incorrectly routed and chafe against other components. This condition could lead to the brake hose leaking fluid and the loss of performance at the rear brake.

Fix: Recall the machines that are likely to be affected to check and reroute or replace the rear brake hose as necessary.

306 vehicles · built 20 Mar 2014 to 23 Nov 2016

Frame may break/deform near the bottom of the down tube under the front of the seat. This will lead to the handle bars getting closer to the driver and the body lowering towards the ground. If not rectified control of the machine could be lost.

Fix: Recall the machines that are likely to be affected and check the frame. If the frame is cracked/deformed the frame must be replaced. If the frame is not cracked a reinforcement kit will be fitted.

148 vehicles · built 18 Dec 2015 to 3 Jun 2016

The wheel bolts may not have been tightened correctly at the factory. If the bolts come loose the directional control of the machine may be compromised.

Fix: Recall the machines that are likely to be affected and tighten the wheel bolts. If the wheel and studs are damaged they will be replaced.

3 vehicles · built 2 May 2016 to 6 May 2016

Due to a nonconformity of the sealing agent fuel may seep from the tank sender unit. Fuel could be ignited if it come into contact with an ignition source.

Fix: Replace tank sender unit on affected machines.

209 vehicles · built 3 Apr 2015 to 29 Jul 2015

As a result of a defective hydraulic circuit in the ABS modulator longer than expected stopping distances could occur.

Fix: Recall the machines that are likely to be affected and replace the ABS modulator.

306 vehicles · built 6 Mar 2012 to 12 Nov 2013

It has been established that a manufacturing defect in the rotor of the fuel pump installed in the aforementioned machines can cause failure of the pump. This may cause the engine not start or it can cause the engine to stall if the machine is being used in particularly high ambient temperatures.

Fix: Recall all affected machines to check and if require place the fuel pump.

1,610 vehicles · built 3 Apr 2008 to 30 Aug 2010

It has been established that a manufacturing defect in the rotor of the fuel pump installed in the aforementioned machines can cause failure of the pump. This may cause the engine not start or it can cause the engine to stall if the machine is being used in particularly high ambient temperatures.

Fix: Recall all affected machines to check and if require place the fuel pump.

1,610 vehicles · built 3 Apr 2008 to 30 Aug 2010

It has been established that a manufacturing defect in the rotor of the fuel pump installed in the aforementioned machines can cause failure of the pump. This may cause the engine not start or it can cause the engine to stall if the machine is being used in particularly high ambient temperatures.

Fix: Recall all affected machines to check and if require place the fuel pump.

1,610 vehicles · built 3 Apr 2008 to 30 Aug 2010

It has been established that a manufacturing defect in the rotor of the fuel pump installed in the aforementioned machines can cause failure of the pump. This may cause the engine not start or it can cause the engine to stall if the machine is being used in particularly high ambient temperatures.

Fix: Recall all affected machines to check and if require place the fuel pump.

1,610 vehicles · built 3 Apr 2008 to 30 Aug 2010

It has been established that a manufacturing defect in the rotor of the fuel pump installed in the aforementioned machines can cause failure of the pump. This may cause the engine not start or it can cause the engine to stall if the machine is being used in particularly high ambient temperatures.

Fix: Recall all affected machines to check and if require place the fuel pump.

1,610 vehicles · built 3 Apr 2008 to 30 Aug 2010

It has been established that a manufacturing defect in the rotor of the fuel pump installed in the aforementioned machines can cause failure of the pump. This may cause the engine not start or it can cause the engine to stall if the machine is being used in particularly high ambient temperatures.

Fix: Recall all affected machines to check and if require place the fuel pump.

6 vehicles · built 4 Jul 2008 to 24 Sep 2008

It is possible that a loss of electrical continuity at the starter relay may occur which can lead to a failure to start the machine or the engine to shut down whilst driving. If the engine shuts down whilst driving this can place the rider in danger.

Fix: Recall the machines that are likely to be affected and replace the starter relay with a new part.

255 vehicles · built 5 Nov 2013 to 27 Aug 2014

The rear brake calliper bolts can become loose. Ultimately if ignored the calliper could become detached resulting in no braking effort available at the rear.

Fix: Recall the vehicles that are likely to be affected and remove the bolts clean the thread apply the correct thread locking material and refit the bolts applying specified torque.

175 vehicles · built 7 May 2014 to 27 Aug 2014

The ECU software for Front Fork Stationary / Parking Hold System may be defective which can lead to the hold system for front suspension failing. The suspension may not lock causing machine to be unstable when parking.

Fix: Recall the machines that are likely to be affected and check Front fork stationary / parking hold system software. Where necessary the software will be updated.

217 vehicles · built 15 Nov 2013 to 4 Jun 2014

The securing clips on the fuel pipe from the fuel pump to the injector support may be defective. This could cause the pipe to split and/or rupture and may result in fuel leaking from fuel pipe connections. This should be identified by a strong smell of petrol and or fuel leaking from the machine onto the ground. If damage to the pipe occurs it will create an increased risk of fire and/or crashing as a result.

Fix: Recall the machines that are likely to be affected to replace the fuel pipe.

68 vehicles · built 23 Apr 2013 to 20 Nov 2013

The securing clips on the fuel pipe from the fuel pump to the injector support may be defective. This could cause the pipe to split and/or rupture and may result in fuel leaking from fuel pipe connections. This should be identified by a strong smell of petrol and or fuel leaking from the machine onto the ground. If damage to the pipe occurs it will create an increased risk of fire and/or crashing as a result.

Fix: Recall the machines that are likely to be affected to replace the fuel pipe.

94 vehicles · built 2 Apr 2013 to 20 Mar 2014

Fuel may leak from an incorrectly manufactured fuel pipe clip. The clip fastens the pipe to the injector. This could pose a risk of an accident and/or fire risk.

Fix: Recall the machines that are likely to be affected to replace the complete fuel pipe which includes the clips.

253 vehicles · built 6 May 2013 to 4 Oct 2013

Intermittent cutting out and stalling can occur. Which could lead to possible injury if rider came off and potential damage to the engine.

Fix: Recall the machines that are likely to be affected to replace the engine Electronic Control Unit.

8 vehicles · built 23 Mar 2013 to 23 Apr 2013

The saddle strap can become insecure. It is possible for the saddle strap to fail the passenger to become unstable and in the worst circumstances the passenger could fall from the machine.

Fix: Recall the machines that are likely to be affected to replace the seat strap with one which has more substantial fixings.

2,687 vehicles · built 16 Jan 2012 to 19 Sep 2013

It has been identified that on subject machines cracking of both main frame members can occur.

Fix: Recalled machines will be fitted with a steel support in the subject area.

60 vehicles · built 1 Jan 2004 to 31 Dec 2008

The battery main positive cable may become stuck between the chassis and the helmet compartment if not rectified the cable may chafe on the metal components and ultimately short circuit.

Fix: Recall affected machines and reroute the cable.

66 vehicles · built 1 Jan 2006 to 31 Dec 2008

The battery main positive cable may become stuck between the chassis and the helmet compartment if not rectified the cable may chafe on the metal components and ultimately short circuit.

Fix: Recall affected machines and reroute the cable.

66 vehicles · built 1 Jan 2006 to 31 Dec 2007

In some cases the exhaust may release gases with the potential to damage components adjacent to the muffler area.

Fix: Recall the machines that are likely to be affected to replace the exhaust system header pipe with one of a different design.

1,292 vehicles · built 1 Jan 2005 to 31 Dec 2006

In extreme circumstances it is possible that the upper shock absorber support can shear causing the vehicle to drop down suddenly at the rear and leading to a likely loss of control of the vehicle.

Fix: Recall the vehicles that are likely to be affected to fit a repair kit that supports the upper shock absorber mounting bracket.

102 vehicles

In very rare circumstances the front stanchions may bend or fracture ( e.g. after impact from severe pothole or light front collision). This may cause impairment of suspension action or loss of steering control with consequent risk of accident.

Fix: Recall the affected motorcycles and fit modified front fork stanchions.

3,441 vehicles · built 1 Jan 2001 to 31 Dec 2001

In very rare circumstances the front stanchions may bend or fracture ( e.g. after impact from severe pothole or light front collision). This may cause impairment of suspension action or loss of steering control with consequent risk of accident.

Fix: Recall the affected motorcycles and fit modified front fork stanchions.

3,441 vehicles · built 1 Jan 2001 to 31 Dec 2001

In very rare circumstances the front stanchions may bend or fracture ( e.g. after impact from severe pothole or light front collision). This may cause impairment of suspension action or loss of steering control with consequent risk of accident.

Fix: Recall the affected motorcycles and fit modified front fork stanchions.

3,441 vehicles · built 1 Jan 2001 to 31 Dec 2001

In very rare circumstances the front stanchions may bend or fracture ( e.g. after impact from severe pothole or light front collision). This may cause impairment of suspension action or loss of steering control with consequent risk of accident.

Fix: Recall the affected motorcycles and fit modified front fork stanchions.

3,441 vehicles · built 1 Jan 2001 to 31 Dec 2001

The rear brake caliper mounting lugs situated in the rear hub gearbox cover may fracture allowing the rear caliper to break free with consequent loss of rear brake control and the potential to lock up the rear wheel.

Fix: Recall affected machines and fit additional rear brake caliper support bracket.

1,042 vehicles

There is the possibility that the throttle may stick open with the consequence that the scooter may either fail to lose speed or continue to accelerate.

Fix: Inspect carburettor and if found to be manufactured by Dellorto replace carburettor.

1,070 vehicles

There is the possibility that the throttle may stick open with the consequence that the scooter may either fail to lose speed or continue to accelerate.

Fix: Inspect carburettor and if found to be manufactured by Dellorto replace carburettor.

1,070 vehicles

There is the possibility that the throttle may stick open with the consequence that the scooter may either fail to lose speed or continue to accelerate.

Fix: Inspect carburettor and if found to be manufactured by Dellorto replace carburettor.

1,070 vehicles

There is the possibility that the throttle may stick open with the consequence that the scooter may either fail to lose speed or continue to accelerate.

Fix: Inspect carburettor and if found to be manufactured by Dellorto replace carburettor.

1,070 vehicles

The welding which secures the handlebars to the steering column can progressively fracture which can lead to the loss of steering control.

Fix: Recall likely to be affected machines and fit quality assured handlebar assemblies.

215 vehicles