Harley-Davidson Touring recalls

Certain machines may exhibit a condition that can result in the brake lamp(s) remaining illuminated regardless of whether the service brakes are applied.

Fix: Owners of affected machines will be advised to make arrangements with an authorised Harley-Davidson dealer who will perform the remedy at no charge to the customer. Dealers will apply a software update to affected Touring and CVO Touring vehicles. Dealers will apply a software update and install a new pressure switch on affected Trike and CVO Trike vehicles.

2,807 vehicles · built 2 Jul 2019 to 23 Jun 2022

Air ingress to the hydraulic clutch slave cylinder causing insufficient disengagement.

Fix: Replace cluch slave cylinder piston and seal.

1,965 vehicles · built 6 Mar 2016 to 17 Jun 2017

If the brake fluid has not been changed as per manufacturer's instructions deposits may form which may affect the operation of the ABS module. Continued use may lead to loss of braking.

Fix: On affected vehicles flush the brake systems and replace with an uprated specification fluid.

3,050 vehicles · built 25 Jun 2006 to 13 Dec 2011

An oil line may not have been correctly clamped which may allow oil to leak.

Fix: On affected machines check for correct installation of the clamp. where necessary replace clamp.

295 vehicles · built 2 May 2016 to 9 May 2017

Hydraulic clutch master cylinder may fail to disengage engine on initial gear engagement leading to the machine lurching forward and falling over. This condition gives an elevated risk of injury to the rider and bystanders.

Fix: Recall the machines that are likely to be affected to inspect and clean the clutch master cylinder piston. Where necessary the master cylinder piston will be replaced.

513 vehicles · built 17 Jul 2015 to 31 Mar 2016

The rear brake lamp switch may become exposed to temperatures that degrade its performance. This condition may affect brake lamp function and /or cause a brake fluid leak through the rear brake switch affecting rear brake performance.

Fix: Recall the machines that are likely to be affected to check and where necessary replace the rear brake lamp switch using the recall kit.

1,916 vehicles · built 6 Jun 2008 to 16 Sep 2011

Certain 2004 model year carburettor equipped motorcycles have been fitted with a fuel tap where the 'On' and 'Reserve' markings have been transposed.

Fix: Replace the fuel valve (tap).

159 vehicles

The tail lamp bulb may become loose in its mounting socket.

Fix: Recall the machines that are likely to be affected and replace the tail lamp bulb with a re-designed bulb.

520 vehicles · built 1 Jun 2003 to 31 Aug 2003

It has been identified that the subject machines have been fitted with a sub-standard 40amp circuit.

Fix: Recalled machines will have the circuit breaker replaced.

341 vehicles · built 1 Jan 1999 to 31 Dec 2003