Iveco Eurotrekker recalls

It is possible for the for the exhaust silencer strap bolts to slacken which if not rectified could lead to the total failure of the silencer mounting.

Fix: Recall the vehicles that are likely to be affected to replace the mounting bolts with new pre-coated bolts (locking compound) and tighten to the correct torque.

• EUROTREKKER: 152 vehicles · built 1 Nov 2005 to 31 Jan 2007
• EUROTREKKER: 152 vehicles · built 1 Nov 2005 to 31 Dec 2006

It has been identified that the possibility exists that the front spring spacer plate position may be incorrectand the U bolts may not have been tightened to the correct torque setting.

Fix: Recalled vehicles will have the position of the spacer plate checked. The spacer plate will be renewed if found to be incorrectly positioned. In addition the torque of the front spring U bolts will be checked.

184 vehicles · built 1 Jul 2001 to 31 Jul 2003

The retaining bolts of the drop arm and track arms may not have been tightened to the correct torque. With the possibility that the bolts may become loose.

Fix: Recalled vehicles will have the subject bolts tightened to the correct torque.

68 vehicles · built 13 Oct 2004 to 27 Dec 2004

It is not possible to obtain the correct torque on the steering ram and cylinder ball joint clamp bolts. Therefore after a certain time it might be possible for the ball joint to become loose on its threads.

Fix: Recall the vehicles that are likely to be affected. Replace the nuts and bolts that clamp the ball joints to the ram and cylinder and tighten them to the correct torque.

18 vehicles · built 5 Apr 2004 to 6 Apr 2004

The propshaft may fail due to a production fault.

Fix: Check the production date on the propshaft and replace where found necessary.

41 vehicles

There is the possibility of an air loss from the footbrake system due to corrosion in the pressure regulator APU valve (air dryer with four circuit safety valve].

Fix: To prevent corrosion in the pressure regulator APU a new rubber diaphragm will be fitted.

1,872 vehicles · built 17 Apr 1998 to 22 Jun 2002

The drivers cab tilt cylinder support bracket may fail resulting in the cab collapsing when tilted.

Fix: Recall affected vehicles and replace the support bracket with a modified type.

21 vehicles · built 1 Jan 1998 to 31 Dec 2000

A steel ball used to seal an aperture in the parking brake control valve may become displaced and could result in inadvertent application of the parking brake.

Fix: The affected vehicles are being recalled to be inspected for the make of parking brake valve fitted. A securing clamp will be fitted to all the affected units to prevent displacement of the ball.

4,332 vehicles