Mv Agusta Spa recalls

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

Due to a production error there may be excessive play in the axial clamping screw on the forks. This could lead to a loss of control. THE MANUFACTURER RECOMMENDS NOT TO RIDE THE MACHINE UNTIL THE RECALL IS COMPLETED.

Fix: On affected machines check the threaded holes in the axle carriers with a special tool. If the nonconformity is present the fork leg with a defective axle carrier will be replaced.

16 vehicles · built 12 Mar 2018 to 30 Apr 2018

A manufacturing defect exists in a production batch of front brake master cylinder components which MV AGUSTA has installed on a series of F4 RR and F4 RC model motorcycles. The defect in the front brake master cylinder could cause it to malfunction during normal use of the motorcycle leading to a loss of front braking ability and increasing the risk of a crash. Specifically crack generation on the front brake master cylinder PPS (polyphenilene sulphide) piston connecting the internal pressure area to the external surface. The consequence is that the front brake may not participate in stopping the bike properly. The rear brake is not affected and works correctly.

Fix: Replace the synthetic piston in the front brake master cylinder with one made from aluminium machined from solid billet guaranteeing a higher strength material as well as eliminating the possibility of porosity.

56 vehicles · built 27 Nov 2014 to 29 Jun 2017

A manufacturing defect exists in a production batch of front brake master cylinder components which MV AGUSTA has installed on a series of F4 RR and F4 RC model motorcycles. The defect in the front brake master cylinder could cause it to malfunction during normal use of the motorcycle leading to a loss of front braking ability and increasing the risk of a crash. Specifically crack generation on the front brake master cylinder PPS (polyphenilene sulphide) piston connecting the internal pressure area to the external surface. The consequence is that the front brake may not participate in stopping the bike properly. The rear brake is not affected and works correctly.

Fix: Replace the synthetic piston in the front brake master cylinder with one made from aluminium machined from solid billet guaranteeing a higher strength material as well as eliminating the possibility of porosity.

56 vehicles · built 27 Nov 2014 to 29 Jun 2017

A potentially defective rear wheel rim has been installed on some motorcycles. The rear wheel rim has spokes that may become loose and eventually cause the wheel to fail. If the spokes are loose or become loose the wheel may react abnormally causing the motorcycle to wobble when ridden thus increasing the nsk of an accident.

Fix: Recall the seven possibly affected machines and replace the rear wheel rim.

7 vehicles · built 26 Jun 2017 to 25 Sep 2017

The rear shock absorber piston rod nut may come loose. The shock absorber performance may be affected possibly causing a loss of machine control.

Fix: Recall the machines that are likely to be affected and replace the shock absorber..

4 vehicles · built 2 Sep 2014 to 29 Sep 2014

Some machines have beenproduced with a rear swingarm mounting bolt that is not to specification. These bolts could fail thereby enabling the swingarm to move laterally which could result in the loss of directional control of the machine and increase the risk of a crash

Fix: Recall all the affected machines and replace the swing arm mounting bolt.

26 vehicles · built 18 Dec 2013 to 10 Mar 2014

Some machines have beenproduced with a rear swingarm mounting bolt that is not to specification. These bolts could fail thereby enabling the swingarm to move laterally which could result in the loss of directional control of the machine and increase the risk of a crash

Fix: Recall all the affected machines and replace the swing arm mounting bolt.

26 vehicles · built 18 Dec 2013 to 10 Mar 2014

Some machines have beenproduced with a rear swingarm mounting bolt that is not to specification. These bolts could fail thereby enabling the swingarm to move laterally which could result in the loss of directional control of the machine and increase the risk of a crash

Fix: Recall all the affected machines and replace the swing arm mounting bolt.

26 vehicles · built 18 Dec 2013 to 10 Mar 2014

Some machines have beenproduced with a rear swingarm mounting bolt that is not to specification. These bolts could fail thereby enabling the swingarm to move laterally which could result in the loss of directional control of the machine and increase the risk of a crash

Fix: Recall all the affected machines and replace the swing arm mounting bolt.

26 vehicles · built 18 Dec 2013 to 10 Mar 2014

Some machines have beenproduced with a rear swingarm mounting bolt that is not to specification. These bolts could fail thereby enabling the swingarm to move laterally which could result in the loss of directional control of the machine and increase the risk of a crash

Fix: Recall all the affected machines and replace the swing arm mounting bolt.

26 vehicles · built 18 Dec 2013 to 10 Mar 2014

Following internal testing by the manufacturer it has been established that the upper fixture points on the rear subframe may not be sufficiently strong enough. This could result in the loss of support for the rider's seat and possibles loss of control.

Fix: Recall all affected machines and fit replacement supports.

136 vehicles · built 27 Oct 2009 to 7 Sep 2010

There is a possibility that the oil filter may loosen. If ignored oil may leak onto the rear wheel.

Fix: Recall affected machines to check that latest filter is fitted with modified seal.

600 vehicles

There is a possibility that the oil filter may loosen. If ignored oil may leak onto the rear wheel.

Fix: Recall affected machines to check that latest filter is fitted with modified seal.

600 vehicles

There is a possibility that the oil filter may loosen. If ignored oil may leak onto the rear wheel.

Fix: Recall affected machines to check that latest filter is fitted with modified seal.

600 vehicles