Peugeot 308 (T9) recalls

There is a possibility that the internal corrosion protection of the front subframe is not durable enough.

Fix: Replacing the front subframe assembly.

38 vehicles · built 23 Feb 2015 to 13 Mar 2015

On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to indicate if the ECU is incorrect.

Fix: The manufacturer has no simple method to check the internal component. Therefore all ECU's in affected vehicles to be changed as a precaution.

124 vehicles · built 8 Nov 2017 to 9 Nov 2017

The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.

Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature.

1,579 vehicles · built 2 Oct 2013 to 30 Apr 2015

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

416 vehicles · built 1 Oct 2017 to 30 Nov 2017

The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit.

Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary.

7,394 vehicles · built 2 Oct 2013 to 4 Apr 2017

A possible non-conformity in the fitting of the tyre valves as well as an incorrect tightening torque of the valve securing nut could cause a valve to fail and a rapid loss of pressure in the tyres. The tyre pressure monitoring warning lamp would illuminate to warn the driver.

Fix: On affected vehicles replace the tyre valves using a fitting jig.

235 vehicles · built 21 Aug 2015 to 5 Apr 2016

A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.

Fix: On affected vehicles check and where necessary replace door locks.

679 vehicles · built 24 Aug 2015 to 11 Nov 2015

A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.

Fix: On affected vehicles check and where necessary replace door locks.

1,347 vehicles · built 28 Aug 2015 to 11 Nov 2015

A manufacturing defect of a component within any of the four door locks could result in jamming of the internal mechanism which prevents the closing of any of the vehicle's doors or risk unexpected unlocking and opening of the doors.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the affected door locks.

1,369 vehicles · built 11 Sep 2015 to 11 Nov 2015

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

148 vehicles · built 9 Jan 2014 to 14 Jan 2014