Peugeot 5008 V3 recalls

Affected vehicles may have a tyre class mismatch between the technical specification declared in the Certificate of Conformity and the actual vehicle configuration.

Fix: Check the tyre class of all vehicle tyres and exchange all 4 for Class A+ tyres if necessary

150 vehicles · built 7 Mar 2025 to 15 Apr 2025

On affected vehicles the Motor Control Unit (MCU) Inverter may have a manufacturing deviation which could lead to gearbox malfunctions and the risk of an internal electrical short circuit leading to overheating or a fire.

Fix: Replace the MCU Inverter.

2 vehicles · built 18 Mar 2026 to 20 Mar 2026

On certain Peugeot vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster. An additional pop-up appears for around 10 seconds at each key on/key off (Driving Assistance Sensor Blind: clean sensor see User Manual). The Automatic Emergency Braking system is operating in a degraded mode but remains functional due to radar support.

Fix: To rectify this issue we will update the Vehicle System Management software

20 vehicles · built 2 Feb 2024 to 2 Jul 2024

Affected vehicles may have a cylinder block with a missing cooling nozzle. A missing nozzle means the piston may not be adequately cooled causing it to weaken deform or break and leading to sudden engine failure resulting in a loss of power and in the worst‑case scenario a thermal incident.

Fix: Check the presence of all cooling nozzles and replace if missing.

24 vehicles · built 25 Nov 2025 to 27 Nov 2025

On affected vehicles the front left and right control arm ball-joint bracket screws are at risk of fracture which could affect the vehicle's controllability.

Fix: Inspect the marking on the left and right front ball-joint bracket and change if necessary.

3,005 vehicles · built 15 Mar 2024 to 28 Feb 2025

On affected vehicles the low-pressure fuel pipe could come in to contact with one of the ignition coil screws. This could lead to fuel pipe damage over time resulting in a fuel leak.

Fix: Fix the low-pressure fuel pipe to the crankcase breather hose with a cable tie to ensure there is no contact between the ignition coil screw and the fuel pipe.

1 vehicle · built 11 Mar 2024 to 27 Nov 2024