Peugeot ION recalls

On affected vehicles the Takata airbag inflators may deteriorate over time. This may cause some inflators to rupture with too much force in a crash capable of causing serious injury or death in a worst-case scenario.

Fix: Replace Passenger Airbag module. You are advised not to drive the vehicle.

50 vehicles · built 13 Oct 2010 to 20 Jul 2016

Water may penetrate into the brake vacuum pump causing corrosion.

Fix: Replace the brake vacuum pump.

• ION: 513 vehicles · built 11 Oct 2010 to 15 Jun 2019
• ION: 513 vehicles · built 11 Oct 2010 to 26 Jun 2019

An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.

Fix: On affected vehicles replace the passenger's air bag assembly

507 vehicles

Due to none conformity during manufacture the resistance of the insulated base inside the Engine Control Unit (ECU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.

Fix: Recall the vehicles that are likely to be affected and replace the engine ECU.

35 vehicles · built 21 Aug 2011 to 13 Nov 2014

Due to none conformity during manufacture the resistance of the insulated base inside the motor control unit (MCU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.

Fix: Recall the vehicles that are likely to be affected and replace the engine MCU.

30 vehicles · built 6 Aug 2011 to 29 Mar 2012

The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.

133 vehicles · built 20 Oct 2010 to 27 Jul 2011

The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.

98 vehicles · built 15 Nov 2010 to 26 Feb 2011

The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.

191 vehicles · built 30 Jul 2011 to 29 Aug 2013

On the affected vehicles an internal component of the braking assistance system vacuum pump may not conform. This could over time lead to a reduction in braking assistance.

Fix: Replacement of the vacuum pump

179 vehicles · built 30 Jul 2011 to 8 May 2012