Toyota BZ4X recalls

For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze or not display

Fix: Reprogram the parking assist ECU.

2,934 vehicles · built 9 Nov 2021 to 2 Jun 2025

For affected vehicles due to the programming of the HVAC control ECU software under certain conditions such as a specific failure mode of the electrical compressor the HVAC system will enter a failsafe mode that suspends the heater operation of the system and affects defroster function.

Fix: Reprogram the HVAC control ECU and inspect the compressor .

12,619 vehicles · built 2 Nov 2021 to 2 Jun 2025

Due to insufficient laser welding of the camera case at the supplier during a specific production period there is a possibility that the camera case may separate when exposed to external stress over time allowing water to leak into the camera. If this occurs the circuit inside the camera can short leading to an inability to display an image of the area in front of and/or behind the vehicle.

Fix: Inspect camera and replace if necessary

167 vehicles · built 10 Mar 2023 to 11 Jul 2023

Due to the programming of the forward recognition camera software there is a possibility that the memory inside the forward recognition camera could fail during processing when the ignition is turned OFF. If this occurs the PCS will not activate on the next ignition start causing warning lights to illuminate audible chimes to sound and messages to display on the instrument panel.

Fix: Reprogram the Forward Recognition Camera.

7,150 vehicles · built 2 Nov 2021 to 14 Nov 2023

On affected vehicles due to a programming error there is a possibility that a multi-information display used for warning and indicator lights vehicle gauges messages etc will become blank and will not display certain warnings and indicators. As a result other functions such as turn signal lamps hazard lights and the Pre-Collision System will be deactivated and the vehicle may not meet certain regulations. Driving without these functions may result in an increased risk of a crash in certain driving conditions.�

Fix: Reprogram the multi-information display electronic control unit (ECU) with modified software.

2,289 vehicles · built 2 Nov 2021 to 7 Aug 2023

On affected vehicles there is a possibility that the DCM may not complete the shutdown process within a specific period of time when the ignition is turned off causing the DCM to not restart at the next ignition cycle and making the e-Call function unavailable. As a result the vehicles do not comply with relevant regulations.

Fix: The software of the DCM (Data Communication Module) will be updated via an Over the Air (OTA) wireless update.

27,327 vehicles · built 22 Feb 2023 to 15 Mar 2023

There is a possibility curtain airbag straps may not have been routed in the correct orientation.

Fix: Inspect the straps used to assist in curtain shield airbag deployment and correct any improperly assembled straps.

763 vehicles · built 2 Nov 2021 to 15 Jun 2022

After low-mileage use all of the hub bolts on a wheel can loosen to the point where the wheel can detach from the vehicle.

Fix: Replace the hub bolts with newly designed hub bolts (with a washer).

412 vehicles · built 2 Nov 2021 to 15 Jun 2022