Dodge recalls

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

Fix: Recall the vehicles that are likely to be affected and replace the passenger front air bag module which includes the inflator.

1 vehicles · built 5 Feb 2004 to 22 Aug 2011

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

Fix: Recall the vehicles that are likely to be affected and replace the passenger front air bag module which includes the inflator.

Vehicle count not given · built 18 Feb 2003 to 6 Aug 2009

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

Fix: Recall the vehicles that are likely to be affected and replace the passenger front air bag module which includes the inflator.

Vehicle count not given · built 1 Feb 2005 to 29 Oct 2010

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

Fix: Recall the vehicles that are likely to be affected and replace the passenger front air bag module which includes the inflator.

Vehicle count not given · built 5 Feb 2004 to 11 Jul 2008

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

Fix: Recall the vehicles that are likely to be affected and replace the passenger front air bag module which includes the inflator.

Vehicle count not given · built 11 May 2008 to 12 Jul 2012

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

Fix: Recall the vehicles that are likely to be affected and replace the passenger front air bag module which includes the inflator.

Vehicle count not given · built 12 Jun 2012 to 12 Jul 2012

The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury to vehicle occupants in the event of a deployment event.

Fix: On affected vehicles replace the inflator assembly.

1 vehicles · built 15 Jul 2007 to 22 Aug 2011

The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury to vehicle occupants in the event of a deployment event.

Fix: On affected vehicles replace the inflator assembly.

Vehicle count not given · built 15 Jul 2007 to 6 Aug 2009

The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury to vehicle occupants in the event of a deployment event.

Fix: On affected vehicles replace the inflator assembly.

Vehicle count not given · built 15 Jul 2007 to 29 Oct 2010

The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury to vehicle occupants in the event of a deployment event.

Fix: On affected vehicles replace the inflator assembly.

Vehicle count not given · built 12 Jun 2012 to 11 Jul 2013

The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury to vehicle occupants in the event of a deployment event.

Fix: On affected vehicles replace the inflator assembly.

Vehicle count not given · built 15 Jul 2007 to 11 Jul 2013

Passenger air bag may deploy incorrectly if activated.

Fix: Replace the passenger air bag inflator.

1 vehicles · built 7 Aug 2009 to 22 Aug 2011

Passenger air bag may deploy incorrectly if activated.

Fix: Replace the passenger air bag inflator.

Vehicle count not given · built 7 Aug 2009 to 27 Nov 2014

Passenger air bag may deploy incorrectly if activated.

Fix: Replace the passenger air bag inflator.

Vehicle count not given · built 7 Aug 2009 to 29 Oct 2010

Passenger air bag may deploy incorrectly if activated.

Fix: Replace the passenger air bag inflator.

Vehicle count not given · built 12 Jun 2012 to 18 Sep 2015

On affected vehicles the driver’s airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. An inflator rupture during airbag deployment events could result in metal fragments striking and potentially seriously injuring the vehicle occupant(s).

Fix: Replace the drivers airbag.

1 vehicles · built 7 Mar 2008 to 18 Dec 2008

On affected vehicles the driver’s airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. An inflator rupture during airbag deployment events could result in metal fragments striking and potentially seriously injuring the vehicle occupant(s).

Fix: Replace the drivers airbag.

93 vehicles · built 19 Sep 2007 to 29 Oct 2010

On affected vehicles the rearview camera may not display an image when reverse is selected.

Fix: On the affected vehicles the radio software will be updated to rectify issue

6 vehicles · built 13 Jul 2020 to 22 Dec 2022

Affected vehicles may experience an Anti-Lock Braking System (ABS) module software malfunction which can disable the Electronic Stability Control (ESC) system. Failure of the ESC system can in certain driving conditions cause a vehicle crash without prior warning.

Fix: Install modified software to the ABS control module.

4 vehicles · built 9 Apr 2021 to 9 Dec 2022

On affected vehicles the rear spoiler may be over-flush to the roof allowing contact to the roof when opening and/or closing the liftgate. An over-flush rear spoiler may become damaged when opening and/or closing the liftgate which may result in the spoiler becoming partially detached from the vehicle.

Fix: Affected vehicles will require the clearances and spoiler security checked and if necessary replace the spoiler.

5 vehicles · built 24 Oct 2020 to 16 Feb 2023

The Antilock Brake System control module may have software which prevents the Electronic Stability Control tell-tale (warning) lamp from displaying properly.

Fix: Update the AMS control module software.

Vehicle count not given · built 13 Jul 2020 to 5 Mar 2022

The rear spoiler may be fitted so it is overhanging the roof allowing contact with the roof when opening or closing the tailgate.

Fix: The rear spoiler will be inspected for correct installation. If needed the upper spoiler section will be replaced and the spoiler reattached to the vehicle.

1 vehicles · built 13 Jul 2020 to 23 Oct 2020

The flanged wheel nuts may have been over-torqued.

Fix: Inspect all wheel studs and replace if necessary. Update the user manual.

17 vehicles · built 26 Apr 2011 to 21 May 2021

Possible inadequate front windscreen adhesion to the vehicle body.

Fix: Remove and replace the front windscreen urethane sealant.

1 vehicles · built 27 Oct 2020 to 4 Dec 2020

The degradation of the catalytic converter may result in vehicles exceeding the emissions standards.

Fix: Update the Powertrain Control Module with the latest available software and replace the catalytic converters and the oxygen sensors.

1 vehicles · built 11 Sep 2014 to 3 Jul 2017

The degradation of the catalytic converter may result in vehicles exceeding the emissions standards.

Fix: Update the Powertrain Control Module with the latest available software and replace the catalytic converters and the oxygen sensors.

1 vehicles · built 11 Sep 2014 to 3 Jul 2017

The radio allows for the rear view camera to be displayed longer than the time allowed.

Fix: The radio software will need to be inspected and if required updated.

1 vehicles · built 25 Jun 2019 to 22 Oct 2019

The driver�s airbag emblem may have become loose or detached.

Fix: Remove the emblem and the emblem retainers

2,769 vehicles · built 30 May 2006 to 9 Dec 2011

The driver�s airbag emblem may have become loose or detached.

Fix: Remove the emblem and the emblem retainers

2,769 vehicles · built 30 May 2006 to 9 Dec 2011

The Occupant Restraint Control (ORC) module may inadvertently deploy the airbags and/or seat belt pretensioners

Fix: Replace the ORC module

1 vehicles · built 18 May 2004 to 28 Aug 2006

Expelled transmission fluid may come in contact with the turbocharger or other ignition sources within the engine compartment and lead to a vehicle fire

Fix: Replace the transmission valve body separator plate and reprogram the Powertrain Control Module.

3 vehicles · built 11 Oct 2018 to 27 Jan 2020

On affected vehicles the side airbags may not deploy.

Fix: Check installation of side airbag and where necessary replace.

2 vehicles · built 26 Aug 2013 to 18 Aug 2015

The driver airbag inflator housing may rupture during normal airbag deployment events and metal fragments could injure components. This is more likely to occur if the vehicle has been exposed to high levels of absolute humidity for extended periods of time.

Fix: On affected vehicles replace the driver's air bag inflator.

1 vehicles · built 5 Feb 2004 to 29 Oct 2010

The driver airbag inflator housing may rupture during normal airbag deployment events and metal fragments could injure components. This is more likely to occur if the vehicle has been exposed to high levels of absolute humidity for extended periods of time.

Fix: On affected vehicles replace the driver's air bag inflator.

Vehicle count not given · built 5 Feb 2004 to 29 Oct 2010

The driver airbag inflator housing may rupture during normal airbag deployment events and metal fragments could injure components. This is more likely to occur if the vehicle has been exposed to high levels of absolute humidity for extended periods of time.

Fix: On affected vehicles replace the driver's air bag inflator.

Vehicle count not given · built 5 Feb 2004 to 22 Aug 2011

The driver airbag inflator housing may rupture during normal airbag deployment events and metal fragments could injure components. This is more likely to occur if the vehicle has been exposed to high levels of absolute humidity for extended periods of time.

Fix: On affected vehicles replace the driver's air bag inflator.

Vehicle count not given · built 18 Feb 2003 to 11 Jul 2008

The passenger airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. This could result in an increased chance of occupant injury during certain crash conditions.

Fix: Replace air bag inflator on affected vehicles

319 vehicles · built 13 Mar 2002 to 31 Jul 2004

The passenger airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. This could result in an increased chance of occupant injury during certain crash conditions.

Fix: Replace air bag inflator on affected vehicles

319 vehicles · built 5 Jan 2004 to 31 Jul 2004

The passenger airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. This could result in an increased chance of occupant injury during certain crash conditions.

Fix: Replace air bag inflator on affected vehicles

319 vehicles · built 21 Jul 2003 to 15 Jul 2004

The passenger airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. This could result in an increased chance of occupant injury during certain crash conditions.

Fix: Replace air bag inflator on affected vehicles

319 vehicles · built 30 Apr 2004 to 30 Jul 2004

The rear axle pinion nut has been assembled without the use of a thread adhesive which could allow the pinion nut to loosen. As a result the propshaft detach form the vehicle or the final drive could seize.

Fix: On affected vehicles check security of pinion nut. Dependant on outcome fit a pinion nut retainer or recondition final drive assembly.

15 vehicles · built 28 Jan 2004 to 3 Aug 2005

It is possible that the front door wiring may fatigue and break. Should this occur it may affect the circuitry for the side air bag which may if the vehicle is involved in a side impact result in the non deployment of the side air bag.

Fix: Recall all affected vehicles for a check of the wiring and repair if required.

1,371 vehicles · built 1 Nov 2007 to 30 Nov 2008

The accelerator pedal may stick thereby causing the vehicle to react differently than the driver would anticipate.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the throttle pedal and reprogramme the ECU.

80 vehicles · built 7 Mar 2006 to 19 May 2006

It has been identified that the front door latch cables may; during certain operating conditions become detached from the interior release handle housing. This can result in the door latch sticking in the unlatched position and the lock function to become inoperative.

Fix: Recalled vehicles will have a latch cable retaining clip installed on the right and left front door interior release handle housings.

392 vehicles · built 1 Jan 2007 to 26 Oct 2007