Ducati Monster recalls

Because of a manufacturing fault the floating piston in the front brake master cylinder may crack under high stress conditions typical of track use frequent ABS interventions or if a machine is dropped. This could reduce the efficiency of the front brake.

Fix: On affected machines replace the floating piston in the front brake master cylinder with a modified version.

3,504 vehicles · built 1 Sep 2015 to 15 Jan 2018

There is a potential for the friction material on the rear brake pads to come away from the brake pad due to a fault in the adhesion. There is a possibility if ignored the brake pads will deteriorate leading to a loss of rear brake efficiency.

Fix: Affected brake pads will be replaced.

52 vehicles

Tests have shown that after high mileage small cracks can appear on the hub section of the rear wheel. If these cracks are ignored the wheel could eventually collapse.

Fix: Recall the machines that are likely to be affected to replace the rear wheel with one of a higher specification.

240 vehicles

Due to nonconformity of the of the fuel lines it is possible that a slight fuel leak could develop.

Fix: Recall the machines that are likely to be affected to replace the fuel pipes and where necessary refit the flange bolts with thread locking compound.

101 vehicles · built 1 Jan 2011 to 16 Jan 2012

The fuel pump flange and fuel tank coupling may not be to specification and therefore leak fuel. The ensuing leak will eventually cause the engine to stall.

Fix: Recall the machines that are likely to be affected to check the serial number identifying the tank. If the serial number corresponds to faulty items then it will be replaced with a new tank.

31 vehicles

It has been identified that the main wiring harness may come into contact with the vertical cylinder head this can lead to damage to the harness poor running with random fault codes being displayed.

Fix: Recalled machines will have the subject wiring repositioned and fastened to the frame.

333 vehicles

The engine may overheat because the water pump impeller shaft is of incorrect length and does not engage drive from the timing layshaft.

Fix: Recall the machines that are likely to be affected to check the engagement of the water pump impeller shaft and where necessary replace the water pump assembly.

11 vehicles

Flexible fuel line connecting the fuel tank flange to the pressure regulator may be liable to premature degradation and subsequently leak.

Fix: Recall affected motorcycles and fit a quality assured replacement fuel line.

351 vehicles · built 1 Jan 2001 to 31 Dec 2001