Ducati Xdiavel recalls

In certain collisions passenger backrest could break if it is installed incorrectly and/or used incorrectly�

Fix: Inspect the component to reassemble it according to the procedure and to apply a warning sticker

943 vehicles · built 1 Jan 2016 to 31 Dec 2023

Side stand spring hooking pin may break and cause the undesired opening of the side stand.�

Fix: Replacement of side stand plate and spring hook plate.�

248 vehicles · built 1 Jan 2017 to 31 Dec 2021

The side stand fastening bracket may deform from repeated stress and in exceptional situations may fail.

Fix: The replacement of the side stand fastening bracket spring hooking plate and side stand will be carried out with re-designed parts.

609 vehicles · built 1 Jun 2016 to 31 Dec 2018

Because of a manufacturing fault the floating piston in the front brake master cylinder may crack under high stress conditions typical of track use frequent ABS interventions or if a machine is dropped. This could reduce the efficiency of the front brake.

Fix: On affected machines replace the floating piston in the front brake master cylinder with a modified version.

• MONSTER: 3,504 vehicles · built 1 Sep 2015 to 15 Jan 2018
• XDIAVEL / XDIAVEL S: 3,504 vehicles · built 1 Sep 2015 to 15 Jan 2018
• PANIGALE: 3,504 vehicles · built 1 Sep 2015 to 15 Jan 2018
• MULTISTRADA: 3,504 vehicles · built 1 Sep 2015 to 15 Jan 2018
• SCRAMBLER: 3,504 vehicles · built 1 Sep 2015 to 15 Jan 2018

1. The final drive pulley retaining nut may loosen and cause significant wear to the pulley teeth allowing the gearbox secondary shaft to slip in the pulley with the attendant loss of drive. 2. The lower side plate fastening bolt for the side stand may become loose and if not attended to could eventually fail allowing the machine to fall and be a risk to people in close proximity.

Fix: Recall the machines that are likely to be affected to: 1. Replace the locking device and retorque the final drive pulley retaining nut. 2. Re mount the side stand and plate using new torque settings thread lock and where applicable new bolts..

350 vehicles · built 14 Dec 2015 to 24 Jul 2016

Due to an error in the size of the slots on rear wheel rim hub it is possible that the rear wheel rim might have been installed in the wrong way with the 4 rear wheel shaft driving pins inserted in the slots rather than in the 4 relevant holes. Should this be the case the rider might experience a noisy rear wheel and under extreme situations a loss of traction of the vehicle during use.

Fix: Recall the machines that are likely to be affected and check for proper installation of the rear wheel rim on wheel shaft. If the wheel is installed correctly fit no.4 error-proof inserts and refit the wheel. If the wheel has been fitted incorrectly fit a new wheel rim and no.4 error-proof inserts.

122 vehicles