Honda Accord recalls

The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.

Fix: Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts.

42,435 vehicles

Passenger air bag may not deploy correctly.

Fix: The inflator inside the passenger�s airbag module is to be replaced.

122,397 vehicles · built 17 Nov 2000 to 16 Dec 2014

Driver air bag may not ignite correctly.

Fix: Replace the drivers air bag assembly.

9 vehicles · built 10 Jul 2000 to 25 Jul 2007

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

119,827 vehicles · built 4 Feb 2010 to 20 May 2015

The propellant used in certain air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. The excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material possibly causing severe injury to the vehicle occupants.

Fix: Recall the vehicles that are likely to be affected and replace the airbag inflator unit.

• ACCORD: 20,298 vehicles · built 8 Apr 2009 to 26 Jan 2010
• ACCORD: 20,298 vehicles · built 24 Jul 2009 to 27 Jan 2010
• ACCORD: 20,298 vehicles · built 29 Jul 2009 to 27 Jan 2010

Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment

Fix: On affected vehicles replace the inflator inside the passenger's air bag module.

22,805 vehicles · built 4 Jul 2008 to 4 Jan 2010

Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger�s foot well potentially causing injury to a vehicle occupant.

Fix: On affected vehicles replace the inflator inside the front passenger�s airbag module with a new one.

242,653 vehicles · built 25 Dec 2003 to 29 Dec 2008

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.

31,135 vehicles · built 2 Jan 2003 to 27 Dec 2003

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.

• ACCORD: 60,365 vehicles · built 29 May 2002 to 13 May 2003
• ACCORD: 60,365 vehicles · built 22 Jul 2002 to 13 May 2003
• ACCORD: 60,365 vehicles · built 22 Oct 2002 to 13 May 2003
• ACCORD: 60,365 vehicles · built 4 Jun 2002 to 12 May 2003

The fuel pump relay may fail which will result in either the engine not starting or stalling.

Fix: Recall the vehicles that are likely to be affected to check and where necessary place the fuel pump relay.

6,113 vehicles · built 1 May 2005 to 31 May 2005

It has been identified that a wiring harness located in the boot is not adequately protected and is therefore susceptible to damage. Should damage occur on e or more of the electrical functions fed by that harness may be rendered inoperative.

Fix: Likely to be affected vehicles will be recalled at which time the subject wiring harness will be protected by the fitment of a corrugated tube.

16,685 vehicles · built 2 Oct 2003 to 30 Jun 2004

Due to the possibility of a transistor failure in the multiplex control system the instrument panel lights may fail.

Fix: Affected vehicles will be recalled and the affected part replaced.

2,737 vehicles · built 1 Jul 1998 to 1 Jul 1999

The rear seat belt may suffer poor retraction due to a broken webbing spool. A loose seat belt may not provide sufficient restraint to avoid injury in an impact.

Fix: Examine all seat belts including the front ones and replace any that have damaged spools. Fit a guide clip to the seat belts where the spool is undamaged.

21,667 vehicles · built 1 Feb 1996 to 13 Jul 1998

Electrical contacts within the ignition switch wear prematurely. This can eventually cause the engine to stall without warning.

Fix: Fit a new ignition switch.

53,175 vehicles

Potential chafing of the A/C wiring harness due to inappropriate routing. This can lead to a short circuit.

Fix: Affected vehicles are being recalled to have the A/C wiring harness re-routed and additional protection added. If any wire insulation is worn through and the copper is exposed the harness will be replaced.

2,358 vehicles · built 1 Jan 1995 to 31 Dec 1997