Honda Jazz recalls

The front wide camera may not start up in the correct way after the vehicle is started.

Fix: Change the software in the Front Wide Camera.

15,464 vehicles · built 29 Jan 2020 to 29 Jan 2021

Affected vehicles may be equipped with a fuel pump module manufactured with low density impellers.

Fix: The affected fuel pumps will be replaced.

40,895 vehicles · built 14 Jul 2017 to 3 Sep 2019

The webbing sensor in the rear centre seat belt assembly could become inoperative.

Fix: Check and if the seat belt is within the affected range the seat belt will be replaced.

1,036 vehicles · built 28 Aug 2019 to 25 Sep 2019

Driver air bag may not deploy correctly.

Fix: The inflator inside the drivers airbag module is to be replaced.

43 vehicles · built 17 Dec 2003 to 9 Nov 2011

Passenger air bag may not deploy correctly.

Fix: The inflator inside the passenger�s airbag module is to be replaced.

122,397 vehicles · built 17 Nov 2000 to 16 Dec 2014

Driver air bag may not deploy correctly.

Fix: The inflator inside the drivers airbag module is to be replaced.

8 vehicles · built 26 Jun 2007 to 21 May 2014

Passenger airbag inflators may not operate as intended.

Fix: Replacement of Airbag Assembly on affected vehicles.

119,827 vehicles · built 4 Feb 2010 to 20 May 2015

The propellant used in certain air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. The excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material possibly causing severe injury to the vehicle occupants.

Fix: Recall the vehicles that are likely to be affected and replace the airbag inflator unit.

• JAZZ: 20,298 vehicles · built 2 Dec 2009 to 21 May 2010
• JAZZ: 20,298 vehicles · built 1 Dec 2009 to 28 May 2010

Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment

Fix: On affected vehicles replace the inflator inside the passenger's air bag module.

22,805 vehicles · built 4 Jul 2008 to 4 Jan 2010

Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment.

Fix: On affected vehicles replace the inflator inside the driver's air bag module.

252,174 vehicles · built 2 Mar 2004 to 20 May 2015

Due to abnormal pressure the driver's air bag inflator case may rupture during deployment. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant.

Fix: On affected vehicles replace the inflator inside the drivers airbag module.

52,991 vehicles · built 2 Jan 2007 to 28 Dec 2011

Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger�s foot well potentially causing injury to a vehicle occupant.

Fix: On affected vehicles replace the inflator inside the front passenger�s airbag module with a new one.

242,653 vehicles · built 25 Dec 2003 to 29 Dec 2008

Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant.

Fix: On affected vehicles replace the drivers airbag module.

121,686 vehicles

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.

31,135 vehicles · built 2 Jan 2003 to 27 Dec 2003

The drivers front airbag inflator could produce excessive internal pressure. If an affected airbag deploys the increased internal pressure may cause the inflator to rupture. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant.

Fix: Recall the vehicles that are likely to be affected and replace the inflator inside the drivers airbag module with a new one.

12,723 vehicles · built 10 Jun 2003 to 2 Sep 2004

Water and other liquids may enter the driver's side power window switch and may cause damage switch failure overheating and potentially a fire.

Fix: Recall affected vehicles and replace driver's side power window switch.

171,385 vehicles · built 11 Jul 2001 to 31 Jul 2008

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.

Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.

• JAZZ: 60,365 vehicles · built 21 Sep 2001 to 20 Dec 2002
• JAZZ: 60,365 vehicles · built 21 Sep 2001 to 27 Dec 2002
• JAZZ: 60,365 vehicles · built 25 Dec 2002 to 23 Apr 2003

The left hand front brake pipe may not be fully secure which could lead to the brake pipe chafing on the EGR pipe. If this occurs and remains unseen the damage could result in loss of brake fluid and the attendant loss of braking efficiency.

Fix: Recall the vehicles that are likely to be affected to replace and correctly secure the left hand front brake pipe.

9 vehicles · built 18 Aug 2010 to 18 Sep 2012

In rare circumstances the gear indicator may display neutral when the gearbox is in reverse gear. If this happens the vehicle may reverse unexpectedly and cause an incident.

Fix: Recall vehicles likely to be affected to correct the unit software and inspect the reverse shift holder for deformation. Where necessary the reverse shift piece and shift holder will be replaced.

14,310 vehicles

Due to the layout of the lighting switch wiring harness the low beam headlight circuit can be pulled tighter than other wires. After repeated use of the headlight switch the low beam terminal can become worn and poor electrical continuity may result from an accumulation of copper oxide. In some cases the poor continuity the poor continuity or melted terminal ends will cause the wiring harness terminal ends to melt. Poor continuity or melted terminal ends will cause the low beam head lights to become inoperative increasing the risk of accident.

Fix: The dealer will inspect the low beam terminal if the terminal shows signs of melting the lighting switch and low beam terminal harness will be replaced. If the terminal is not melted the low beam terminal harness will be replaced.

136,329 vehicles · built 22 Oct 2001 to 24 Jul 2008

The sidewall of the tyre may have been damaged during fitting to steel wheels. If the sidewall is weakened a bulge may be seen prior to the tyre deflating suddenly. If the tyre deflates suddenly control of the vehicle may become difficult.

Fix: Recall the vehicles that are likely to be affected to replace the four tyres on the standard steel road wheels.

1,648 vehicles · built 30 Sep 2009 to 21 May 2010

The footbrake pedal is connected to the master cylinder via the brake pedal pin. It is possible that the retaining clip/locking pin that locks the footbrake pedal pin may not have been installed. If this is the case it is possible that the brake pedal pin may become detached. This will result in an increase in pedal travel and a corresponding increase in stopping distance.

Fix: Recall all affected vehicle and check for presence of retaining clip/locking pin. If found to be missing a new clip/pin will be installed.

5,376 vehicles · built 2 Feb 2010 to 6 Apr 2010

Water and other liquids may enter the driver's side power window switch and may cause damage switch failure overheating and potentially a fire.

Fix: Recall affected vehicles check switch and wiring if damaged replace and then fit external cover to switch to prevent water ingress.

171,372 vehicles · built 11 Jul 2001 to 31 Jul 2008

It has been identified that the handbrake lever ratchet may not latch into position when the handbrake is applied due to the possibility of the internal push rod possibly having suffered damage during assembly. With continued usage the push rod joint can become worn causing the handbrake ratchet mechanism not to latch sufficiently. Should this occur the handbrake will become inoperative.

Fix: Recalled vehicles will have the handbrake mechanism replaced.

24,852 vehicles · built 17 May 2004 to 19 Dec 2005

The fuel pump relay may fail which will result in either the engine not starting or stalling.

Fix: Recall the vehicles that are likely to be affected to check and where necessary place the fuel pump relay.

6,113 vehicles · built 1 May 2005 to 31 May 2005

Dipped beam headlights may malfunction either when switched on or during driving.

Fix: Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred.

44,055 vehicles · built 6 Jul 2001 to 21 Sep 2001