Honda Legend recalls

The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.

Fix: Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts.

42,435 vehicles

Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment

Fix: On affected vehicles replace the inflator inside the passenger's air bag module.

22,805 vehicles · built 4 Jul 2008 to 4 Jan 2010

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality.

Fix: On affected vehicles replace the passenger front air bag module.

581 vehicles · built 1 Dec 2005 to 31 Dec 2007

Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment.

Fix: On affected vehicles replace the inflator inside the driver's air bag module.

252,174 vehicles · built 2 Mar 2004 to 20 May 2015

If the brake system undergoes any fluid replacement or bleeding of the system it is possible that the rear seal can become deformed. This can result in a brake fluid leak which will when the fluid reaches a low level illuminate the brake fluid low warning light on the dash. If the driver does not take any notice of the warning it is possible that the brake performance of the vehicle could be affected.

Fix: Recall all affected vehicles and replace the rear seal with an improved one.

563 vehicles · built 23 Dec 2005 to 6 Feb 2007

It has been identified that due to heat deterioration of the rubber the power steering feed hose may leak. If ignored loss of power assistance will ensue with the chance that hydraulic oil may leak onto the catalytic converter resulting in the generation of smoke and the potential of fire.

Fix: Recalled vehicles will have the subject hose replaced.

249 vehicles

The brake/stop lights may not function due to oil contamination of the switch.

Fix: Replace the brake light switch and remove all traces of oil from the switch pad.

101 vehicles · built 1 Jan 2000 to 29 Mar 2002

A bolt in the transmission can loosen and fall out disengaging the transmission from the differential. If this condition occurs while the vehicle is being driven it could cause an unexpected loss of drive. If the vehicle is stopped with the transmission in the PARK position and the parking brake is not engaged the vehicle could move unexpectedly.

Fix: Affected vehicles are being recalled to have an updated sealing bolt and O-ring installed.

1,187 vehicles · built 1 Jan 1996 to 31 Dec 1999

Certain vehicles were manufactured with front lower ball joints that may prematurely wear out and in the worst case separate from the front knuckle. If separation occurs then loss of steering control may happen.

Fix: Affected vehicles are being recalled to have both front lower ball joint assemblies replaced.

4,370 vehicles · built 1 Jan 1996 to 31 Dec 1997