LEVC / London Taxi recalls

It has been found on a small number of vehicles that fuel tank module locking ring has become loose.

Fix: Check for the position of the locking tabs of the locating ring and rework if not correct.

1,511 vehicles · built 12 Aug 2021 to 11 Apr 2022

It has been found on a small number of vehicles that fuel tank module locking ring has become loose.

Fix: Check for the position of the locking tabs of the locating ring and rework if not correct.

1,511 vehicles · built 12 Aug 2021 to 11 Apr 2022

Under abnormal operation the AEB (Automatic Emergency Braking) feature will not operate between 10 to 40 deg C.

Fix: Install a software improvement.

1,111 vehicles · built 24 Oct 2019 to 16 Mar 2020

The clutch pedal may detach from the pedal box due to a non-conformity of the pedal pivot shaft.

Fix: Recall the vehicles that are likely to be affected to fit a new pivot shaft and retaining devices.

422 vehicles

Seizure of vehicle steering box resulting in sudden and unexpected loss of steering control of the vehicle. Issue came to light on the investigation of two customer vehicles which experienced the above symptoms. In both cases LTI Vehicles were able to confirm the symptoms and establish the root cause as a displaced retention circlip within the working mechanism of the steering box.

Fix: LTI Vehicles will inform customers of this potential issue and recommend that they stop using their vehicle. A refurbished steering box will be supplied and fitted on all of the affected vehicles as soon as validated parts become available.

394 vehicles · built 30 Aug 2010 to 19 Sep 2012

It is possible that the drop arm on the steering idler shaft may become loose due to the loosing of the drop arm retention nut. In extreme conditions the steering operation may become erratic.

Fix: Recall all affected vehicles for the drop arm retention nut to be removed have Loctite high strength thread sealant added to the threads and refitted then torqued to the appropriate setting.

1,292 vehicles · built 30 Aug 2010 to 17 May 2011

It is possible that the handbrake cable may detach from the handbrake lever due to an issue with the quality of the weld on the cable pivot post and the lever. In the worst case this could cause a release of the handbrake.

Fix: Recall affected vehicles and replace the handbrake lever plus associated components.

591 vehicles · built 30 Aug 2010 to 8 Dec 2010

The battery/alternator positive lead connection has been found insecure in its crimped connector to the starter motor on a small number of vehicles. This could cause prolonged engine cranking/difficulty in starting and if they detached from the starter motor during normal driving the engine would eventually loose power. It could also result in the cable electrically shorting against metalic components in the surrounding area.

Fix: Recall the vehicles that are likely to be affected to test the cable fixing and where necessary replace the entire positive lead.

531 vehicles

Fuel injector pipe to fuel pump may leak.

Fix: Recall the vehicles that are likely to be affected to reposition the supporting clamp.

1,577 vehicles

The brake disc to hub mount bolts may be loose which could when the brakes are applied cause judder and noisy braking. This could eventually result in the failure of the retaining bolts and ultimately the disc being detached from the hub.

Fix: Recall the vehicles that are likely to be affected to fit new bolts with loctite applied and torque the disc to hub fixing bolts to specification.

3,084 vehicles

It has been identified that due to an incorrect specification the turbo intake hose may deform due to oil contamination. Should this occur the engine power would be significantly reduced resulting in an attainable road speed of less than 20mph.

Fix: Recalled vehicles will have the turbo hose replaced with a quality assured item.

2,808 vehicles

Under bonnet fires.

Fix: Recall the vehicles that are likely to be affected to 1. Fit fire retardant shields over the bulkhead sound insulation material 2. Replace the EGR pipes 3. Fit a new EGR heat shield to EGR pipe 4. Check the integrity and fit of all related under bonnet components.

5,178 vehicles

The axle fastner of the rear axle panhard rod may fail. This will initially cause lateral movement of the axle which if ignored may lead to loss of directional control.

Fix: Recall the vehicles that are likely to be affected to replace the axle fastner of the panhard rod.

2,697 vehicles

The axle fastner of the rear axle panhard rod may fail. This will initially cause lateral movement of the axle which if ignored may lead to loss of directional control.

Fix: Recall the vehicles that are likely to be affected to replace the axle fastner of the panhard rod.

2,697 vehicles

The water pump pulley may shear from it's boss and cause failure of the drive to the brake vacuum and power steering pumps. This will result in a loss of power assistance to the brakes and steering systems.

Fix: Modify the water pump pulley mounting arrangement.

1,608 vehicles · built 1 Jan 2002 to 30 Sep 2002

As a result of a machining discrepancy the steering box output shaft may fail resulting in loss of steering control.

Fix: Recall the affected vehicles and replace the steering boxes with quality assured versions.

813 vehicles · built 1 Oct 1994 to 28 Feb 1995

The starter motor terminal may fail causing interruption in the feed to various other electrical circuits. Such a failure would immobilise the vehicle and render the lighting system inoperative.

Fix: Recall the affected vehicles for modifications to the wiring which will prevent such an interruption from occurring.

2,118 vehicles · built 23 Dec 1991 to 6 Mar 1993