Citroen recalls

On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.

Fix: Update the Body Control Module software.

279 vehicles · built 28 May 2025 to 1 Mar 2026

On affected vehicles the Body Control Module is not correctly configured to detect a failure in the indicator lamps. As a result if a turn indicator bulb fails it's not detected and the indicator warning does not activate.

Fix: Update the vehicle configuration and the Secure Gateway Electronic Control Unit.

2,193 vehicles · built 2 Feb 2024 to 13 Nov 2025

Affected vehicles may experience an unexpected deactivation of the interior door handles when the key is in engine-running mode which could result in occupants being unable to exit.

Fix: Update the Vehicle Supervision Module software.

131 vehicles · built 14 Nov 2023 to 21 Nov 2024

Affected vehicles have a smart tachograph fitted that may not comply with regulatory requirements.

Fix: Replace the Tachograph Sensor Antenna(s) and adding Wiring Harnesses if necessary.

18 vehicles · built 27 Sep 2024 to 4 Dec 2025

On affected vehicles the Lane Keep Assist tell-tale fails to illuminate if the front camera is blocked meaning no warning light appears in the instrument cluster.

Fix: Update the Body Control Module software.

2,869 vehicles · built 24 Feb 2024 to 19 Mar 2025

On affected vehicles the Motor Control Unit (MCU) Inverter may have a manufacturing deviation which could lead to gearbox malfunctions and the risk of an internal electrical short circuit leading to overheating or a fire.

Fix: Replace the MCU Inverter.

1 vehicles · built 20 Mar 2026 to 20 Mar 2026

On certain Citroen vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster. An additional pop-up appears for around 10 seconds at each key on/key off (Driving Assistance Sensor Blind: clean sensor see User Manual). The Automatic Emergency Braking system is operating in a degraded mode but remains functional due to radar support.

Fix: To rectify this issue we will update the Vehicle System Management software

101 vehicles · built 19 Aug 2023 to 22 Jul 2024

Affected vehicles may exhibit improper headlamp levelling due to an incorrectly assembled Body Height Sensor.

Fix: Change the body height sensor.

5 vehicles · built 15 Jul 2025 to 31 Jul 2025

Affected vehicles may have the incorrect speed limit displayed.

Fix: Update the Body Control Module Software.

6 vehicles · built 22 Nov 2024 to 22 Dec 2025

On affected vehicles due to a Body Control Module (BCM) software weakness an alarm siren may randomly trigger when the vehicle is locked.

Fix: Update the BCM software.

4,457 vehicles · built 15 Jan 2025 to 9 Feb 2026

On affected vehicles due to a Body Control Module (BCM) software weakness an alarm siren may randomly trigger when the vehicle is locked.

Fix: Update the BCM software.

5,885 vehicles · built 25 Mar 2025 to 9 Feb 2026

On affected vehicles due to a production nonconformity the water pump may malfunction which may cause a loss of engine power and result in the engine shutting down.

Fix: Replace the water pump.

729 vehicles · built 15 Oct 2025 to 2 Mar 2026

On affected vehicles due to a production nonconformity the water pump may malfunction which may cause a loss of engine power and result in the engine shutting down.

Fix: Replace the water pump.

403 vehicles · built 15 Oct 2025 to 28 Feb 2026

Affected vehicles may have a power steering harness routed between two screws where minor vibrations could cause harness damage resulting in a possible short circuit. This could lead to a loss of power‑steering assistance and in worst case a fire.

Fix: Ensure new routing and protection of the harness by replacing the existing clip with a new one and add a cap on the bolt thread.

676 vehicles · built 21 Feb 2025 to 31 May 2025

Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility of contact between these components leading to water infiltration and an electrical arch which could trigger a thermal event.

Fix: Replace the pole protection cap of the 48V Belt Starter Generator. Check the distance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator and re‑position or replace the pipe if required.

1,694 vehicles · built 22 Nov 2024 to 22 Dec 2025

Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility of contact between these components leading to water infiltration and an electrical arch which could trigger a thermal event.

Fix: Replace the pole protection cap of the 48V Belt Starter Generator. Check the distance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator and re‑position or replace the pipe if required.

2,391 vehicles · built 22 Feb 2024 to 22 Dec 2025

Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility of contact between these components leading to water infiltration and an electrical arch which could trigger a thermal event.

Fix: Replace the pole protection cap of the 48V Belt Starter Generator. Check the distance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator and re‑position or replace the pipe if required.

937 vehicles · built 4 Oct 2023 to 12 Jan 2026

Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility of contact between these components leading to water infiltration and an electrical arch which could trigger a thermal event.

Fix: Replace the pole protection cap of the 48V Belt Starter Generator. Check the distance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator and re‑position or replace the pipe if required.

218 vehicles · built 25 Oct 2023 to 12 Jan 2023

Affected vehicles equipped with a multifunctional front camera module may face a non-compliance to regulatory requirements due to incorrect front camera module calibration.

Fix: Update the front camera module software and the vehicle software configuration.

1,180 vehicles · built 2 Apr 2024 to 7 May 2025

Affected vehicles may have been fitted with fuel return pipes not according to specification which can lead to a fuel leak.

Fix: Check the fuel return pipes and replace if necessary.

557 vehicles · built 7 Jan 2025 to 22 Jul 2025

On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.

Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes.

249 vehicles · built 28 Aug 2025 to 27 Sep 2025

On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.

Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes.

5,475 vehicles · built 26 Jul 2025 to 8 Oct 2025

On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.

Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes.

471 vehicles · built 28 Jul 2025 to 9 Oct 2025

On affected vehicles the incorrect wheel bolts may have been fitted which could result in loosening or loss of the bolts.

Fix: Check the correct bolts are fitted and replace if necessary.

33 vehicles · built 18 Dec 2023 to 30 Sep 2025

On affected vehicles there may be a software bug in the Body Control Module (BCM) which prevents a connection to the server and affects the speed limit indication system.

Fix: Update the BCM software.

1,572 vehicles · built 4 Jun 2024 to 7 May 2025

Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.

Fix: Update the In-Vehicle-Infotainment software via Over-the-Air.

Vehicle count not given · built 20 Nov 2023 to 5 Jul 2025

Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.

Fix: Update the In-Vehicle-Infotainment software via Over-the-Air.

Vehicle count not given · built 20 Nov 2023 to 5 Jul 2025

Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.

Fix: Update the In-Vehicle-Infotainment software via Over-the-Air.

5,476 vehicles · built 25 Aug 2023 to 8 May 2025

On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.

Fix: Check the brake pedal connection confirm proper assembly and rework it if necessary.

962 vehicles · built 15 May 2025 to 1 Nov 2025

On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.

Fix: Check the brake pedal connection confirm proper assembly and rework it if necessary.

1,890 vehicles · built 10 Jun 2025 to 2 Nov 2025

On affected vehicles there is an issue with the Engine Control Module (ECM) calibration which may lead to non-compliance with regulatory emission requirements.

Fix: Update the ECM calibration.

396 vehicles · built 11 Jul 2022 to 19 Jan 2024

On affected vehicles there is an issue with the Engine Control Module (ECM) calibration which may lead to non-compliance with regulatory emission requirements.

Fix: Update the ECM calibration.

1,838 vehicles · built 11 Jul 2022 to 29 Jan 2024

Affected vehicles may have incorrect or missing tyre pressure messages displayed in the instrument cluster due to a software deviation.

Fix: Update the Electric Stability Control calibration to ensure the correct tyre pressure warning messages are displayed

126 vehicles · built 3 Nov 2023 to 1 Mar 2024

Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.

Fix: Check the rear brake discs and replace them and the brake pads if necessary.

5 vehicles · built 24 Jan 2024 to 24 Jan 2024

Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.

Fix: Check the rear brake discs and replace them and the brake pads if necessary.

1 vehicles · built 24 Jan 2024 to 24 Jan 2024

On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.

Fix: Update the Body Control Module software.

1,024 vehicles · built 20 Sep 2023 to 30 Apr 2025

Affected vehicles may have an incorrect speed limitation value displayed on the instrument cluster due to a wrong configuration.

Fix: Update the configuration in the body control module.

13 vehicles · built 3 Dec 2024 to 11 Feb 2025

Affected vehicles may have a fault in the High Voltage Battery which could potentially lead to it overheating and in the worst case a battery or vehicle fire. Customers are advised to stop any plug-in charging and eSave charging until the vehicle is reworked.

Fix: Update the battery management software or replace the High Voltage Battery if necessary.

384 vehicles · built 20 Jan 2020 to 18 Feb 2021

On affected vehicles there is a risk of the brake bar welding breaking leading to a complete loss of braking.

Fix: Currently there is no determined remedy. You are advised not to drive the vehicle. The repairer will arrange a replacement mobility solution.

1,759 vehicles · built 28 Apr 2025 to 31 Jul 2025

On affected vehicles there is a risk of the brake bar welding breaking leading to a complete loss of braking.

Fix: Currently there is no determined remedy. You are advised not to drive the vehicle. The repairer will arrange a replacement mobility solution.

263 vehicles · built 4 Jun 2025 to 2 Aug 2025

On affected vehicles the Takata airbag inflators may deteriorate over time. This may cause some inflators to rupture with too much force in a crash capable of causing serious injury or death in a worst-case scenario.

Fix: Replace Passenger Airbag module. You are advised not to drive the vehicle.

21 vehicles · built 11 Oct 2010 to 13 Jun 2016

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

3,978 vehicles · built 23 Sep 2020 to 30 Jun 2022

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

13,736 vehicles · built 15 Mar 2018 to 30 Apr 2024

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

1,030 vehicles · built 6 Sep 2017 to 20 Oct 2017

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

50 vehicles · built 12 Sep 2017 to 28 Nov 2020

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

15 vehicles · built 12 Dec 2017 to 28 Nov 2020

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

452 vehicles · built 15 Jun 2018 to 31 May 2022

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

473 vehicles · built 23 Sep 2020 to 30 Jun 2022

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

7 vehicles · built 12 Sep 2017 to 28 Nov 2020

Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

558 vehicles · built 12 Dec 2017 to 28 Nov 2020

On affected vehicles the Automatic Emergency Brake (AEB) function may remain deactivated in a specific use case.

Fix: Update the Front Camera software to ensure correct activation / deactivation of the AEB system.

797 vehicles · built 17 Sep 2024 to 11 Mar 2025

On affected vehicles the bolts on the front wishbone may break due to corrosion.

Fix: Replace the bolts and bushings on both sides of the front wishbone.

10,114 vehicles · built 23 Sep 2020 to 30 Jun 2022

On affected vehicles the Takata airbag inflators may deteriorate over time. This may cause some inflators to rupture with too much force in a crash capable of causing serious injury or death in a worst-case scenario.

Fix: Replace Driver Airbag module. You are advised not to drive the vehicle.

6,153 vehicles · built 2 Feb 2010 to 10 Sep 2013

On affected vehicles the Takata airbag inflators may deteriorate over time. This may cause some inflators to rupture with too much force in a crash capable of causing serious injury or death in a worst-case scenario.

Fix: Replace Driver Airbag module. You are advised not to drive the vehicle.

3,823 vehicles · built 2 Feb 2010 to 31 Mar 2015

Affected vehicles may have incorrect or missing information on the tyre pressure label.

Fix: Replace the tyre pressure label.

590 vehicles · built 27 Nov 2023 to 13 Mar 2025

On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire.

Fix: Retighten the affected connections.

1,002 vehicles · built 23 Mar 2024 to 23 Apr 2025

On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire.

Fix: Retighten the affected connections.

539 vehicles · built 4 Oct 2023 to 23 Apr 2025

On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire.

Fix: Retighten the affected connections.

164 vehicles · built 25 Oct 2023 to 23 Apr 2025

On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire.

Fix: Retighten the affected connections.

1,559 vehicles · built 11 Jan 2022 to 22 Apr 2025

On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire.

Fix: Retighten the affected connections.

25 vehicles · built 27 Oct 2023 to 22 Apr 2025

Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

6,026 vehicles · built 25 Jan 2018 to 27 Jun 2022

Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

852 vehicles · built 4 Oct 2017 to 31 Jan 2023

Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

1,112 vehicles · built 10 Oct 2017 to 30 Jan 2023

Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

32,360 vehicles · built 4 Oct 2017 to 20 Oct 2017

Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

6,123 vehicles · built 14 Jun 2018 to 31 Jan 2023

Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

1,220 vehicles · built 6 Dec 2017 to 9 May 2022

On affected vehicles a low AdBlue level message may not be displayed on the Instrument Panel Cluster. This could lead to the possibility of not being able to start the vehicle due to an empty AdBlue tank.

Fix: Update the Instrument Panel Cluster software.

11 vehicles · built 28 Jun 2021 to 21 Mar 2024

On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.

Fix: Replace the Electronic Brake System Module.

2 vehicles · built 29 May 2024 to 5 Jun 2024

On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.

Fix: Replace the Electronic Brake System Module.

2 vehicles · built 29 May 2024 to 3 Jun 2024

Affected vehicles may face a front seat belt pretensioner malfunction in the event of a crash due to the inversion of command wires in the Airbag ECU connector.

Fix: Replace the affected PINS in the airbag ECU connector.

531 vehicles · built 16 Nov 2024 to 25 Feb 2025

Affected vehicles may face an error in the Battery Monitoring Unit software.

Fix: Update the Battery Monitoring Unit software.

82 vehicles · built 14 Dec 2022 to 2 Mar 2023

Affected vehicles may face an error in the Battery Monitoring Unit software.

Fix: Update the Battery Monitoring Unit software.

330 vehicles · built 24 Aug 2022 to 2 Mar 2023

Affected vehicles may face an error in the Battery Monitoring Unit software.

Fix: Update the Battery Monitoring Unit software.

1,182 vehicles · built 3 May 2022 to 15 Mar 2023

Affected vehicles may face an error in the Battery Monitoring Unit software.

Fix: Update the Battery Monitoring Unit software.

946 vehicles · built 6 May 2022 to 30 Nov 2022

Affected vehicles may face an error in the Battery Monitoring Unit software.

Fix: Update the Battery Monitoring Unit software.

56 vehicles · built 14 Dec 2022 to 2 Mar 2023

Affected vehicles may experience an Autonomous Telematic Box (ATB) that cannot connect to the remote server.

Fix: Change the ATB.

6 vehicles · built 13 May 2024 to 8 Oct 2024

On affected vehicles the chemicals in the Takata airbags may deteriorate over time which may cause the inflator to rupture and lead to serious injury.

Fix: Owners of affected vehicles should immediately cease using their vehicle when safe to do so until the recall action has been completed. Affected vehicles will have the airbag modules replaced.

55,166 vehicles · built 24 Sep 2008 to 21 Feb 2017

On affected vehicles the chemicals in the Takata airbags may deteriorate over time which may cause the inflator to rupture and lead to serious injury.

Fix: Owners of affected vehicles should immediately cease using their vehicle when safe to do so until the recall action has been completed. Affected vehicles will have the airbag modules replaced.

99,524 vehicles · built 5 Dec 2008 to 30 May 2019

Affected vehicles may have been equipped with an Autonomous Telematic Box (ATB) which does not work.

Fix: Change the ATB.

1 vehicles · built 27 Jun 2024 to 9 Sep 2024

Affected vehicles may have been equipped with an Autonomous Telematic Box (ATB) which does not work.

Fix: Change the ATB.

1 vehicles · built 7 Mar 2024 to 3 Sep 2024

On affected vehicles the engine is at risk of becoming damaged because of an inadequate oil supply from an oil jet cooling nozzle.

Fix: Replace the engine oil and filter.

10,574 vehicles · built 7 Oct 2022 to 20 Jun 2024

Affected vehicles may experience an autonomous telematic box that cannot connect to the remote server making it not possible to make calls or use other connected services.

Fix: Disconnect the 12V battery and reconnect it after 15 seconds then check for a trouble code.

2 vehicles · built 5 Mar 2024 to 26 Jun 2024

Affected vehicles may experience an autonomous telematic box that cannot connect to the remote server making it not possible to make calls or use other connected services.

Fix: Disconnect the 12V battery and reconnect it after 15 seconds then check for a trouble code.

3 vehicles · built 11 Apr 2024 to 16 Dec 2024

Affected vehicles may face potential leakage of the under-bonnet fuel pipe due to a weakness of its crimping.

Fix: Change the fuel pipe.

47 vehicles · built 2 Feb 2023 to 14 Sep 2024

Affected vehicles may face potential leakage of the under-bonnet fuel pipe due to a weakness of its crimping.

Fix: Change the fuel pipe.

19 vehicles · built 17 Aug 2023 to 25 Aug 2024

Affected vehicles may not comply with test requirements in the matter of emissions test execution by competent authorities and energy consumption may be too high.

Fix: Update the electrical Vehicle Control Unit (eVCU) software.

29 vehicles · built 7 Jul 2023 to 13 Feb 2024

Affected vehicles may not comply with test requirements in the matter of emissions test execution by competent authorities and energy consumption may be too high.

Fix: Update the electrical Vehicle Control Unit (eVCU) software.

6 vehicles · built 30 Jun 2023 to 16 Feb 2024

On affected vehicles the traffic sign recognition function does not meet regulatory requirements. After de-activation it will remain de-activated even after vehicle restart.

Fix: Update the radio software via over-the-Air.

8 vehicles · built 13 Dec 2023 to 25 May 2024

On affected vehicles the Engine Control Unit (ECU) software is not according to specification.

Fix: Upload modified software to the ECU.

160 vehicles · built 18 May 2022 to 17 Oct 2023

On affected vehicles the Engine Control Unit (ECU) software is not according to specification.

Fix: Upload modified software to the ECU.

256 vehicles · built 20 Jul 2022 to 9 Oct 2023

On affected vehicles the Engine Control Unit (ECU) software is not according to specification.

Fix: Upload modified software to the ECU.

2 vehicles · built 5 Jul 2022 to 4 Oct 2023

On affected vehicles the chemicals in the Takata airbags may deteriorate over time which may cause the inflator to rupture and lead to serious injury.

Fix: Exchange affected airbag modules as a precautionary measure.

21 vehicles · built 24 Sep 2008 to 21 Feb 2017

On affected vehicles the chemicals in the Takata airbags may deteriorate over time which may cause the inflator to rupture and lead to serious injury.

Fix: Exchange affected airbag modules as a precautionary measure.

54 vehicles · built 5 Dec 2008 to 30 May 2019

On affected vehicles the Advanced Driver Assistance System (ADAS) functionality may not meet regulatory requirements and the Active Emergency Brake (AEB) and Lane Keep Assist (LKA) can inadvertently be deactivated by a long press of the ADAS button on the radio.

Fix: On the affected vehicles the radio software will be updated by an Over-The-Air update which will be remotely checked as successfully installed.

619 vehicles · built 1 Feb 2024 to 21 May 2024

On affected vehicles the Advanced Driver Assistance System (ADAS) functionality may not meet regulatory requirements and the Active Emergency Brake (AEB) and Lane Keep Assist (LKA) can inadvertently be deactivated by a long press of the ADAS button on the radio.

Fix: On the affected vehicles the radio software will be updated by an Over-The-Air update which will be remotely checked as successfully installed.

206 vehicles · built 2 Feb 2024 to 21 May 2024

On affected vehicles they may have been supplied with incorrect software in the Traction Battery Management Unit (TBMU) that can lead to a non-compliance with regulatory requirements.

Fix: On the affected vehicles the TBMU software will be updated to meet regulatory requirements.

27 vehicles · built 22 Aug 2024 to 24 Sep 2024

On affected vehicles there may be insufficient fixing on the 1st and/or 2nd row of seats that could potentially allow seat movement in the event of a collision

Fix: On the affected vehicles seat fixings will be reworked

63 vehicles · built 28 Oct 2024 to 8 Oct 2024

On affected vehicles there may be insufficient fixing on the 1st and/or 2nd row of seats that could potentially allow seat movement in the event of a collision

Fix: On the affected vehicles seat fixings will be reworked

859 vehicles · built 28 Oct 2024 to 8 Oct 2024

On affected vehicles the Driver and Passenger front airbags may not deploy properly in the event of a collision

Fix: On affected vehicles the Driver and Passenger front air bags will be replaced

17,614 vehicles · built 2 Feb 2010 to 20 May 2018

On affected vehicles the radio display fixing screws may be missing allowing a potential detachment of the display during a collision.

Fix: On the affected vehicles the fixings will be checked and fitted if necessary.

2,830 vehicles · built 8 Mar 2024 to 4 Oct 2024

On affected vehicles the front brake discs may not be to the required specification and may become noisy and in exceptional cases the brake disc may fail

Fix: On the affected vehicles the front brake discs and pads will be replaced

6 vehicles · built 7 Jan 2024 to 2 Feb 2024

On affected vehicles an incorrect radio may be fitted that does not provide rear view camera functionality to comply with regulatory requirements.

Fix: On the affected vehicles the radio will be replaced

7 vehicles · built 4 Apr 2024 to 17 Jul 2024

Affected vehicles may have been fitted with a metal Manufacturer plate located in the engine compartment that shows the wrong weight values. This can lead to a non-compliance to regulatory requirements.

Fix: Check and replace the metal Manufacturer plate.

11 vehicles · built 26 Mar 2024 to 18 Jul 2024

Affected vehicles may have been equipped with the incorrect rear springs which can result in impaired driving behaviour when fully loaded or a risk of rear spring detachment in a worst-case scenario when empty.

Fix: Replace both rear springs.

779 vehicles · built 18 Oct 2023 to 28 Jun 2024

On affected vehicles there is a fault in the High Voltage (HV) Battery which could potentially lead to a breakdown charging issue and/or overheating and in a worst-case scenario a High Voltage Battery or vehicle fire.

Fix: Replace the High Voltage Battery.

83 vehicles · built 20 Jan 2020 to 14 Apr 2021

Affected vehicles may suffer a loss of Hydraulic Brake Compensation (HBC). In a worst-case scenario this can lead to reduced brake performance.

Fix: Update the ECU (Engine Control Unit) calibration.

70 vehicles · built 12 Sep 2023 to 22 Jan 2024

On affected vehicles there could be a loss of ground connections for some electrical harnesses which could result in a worst-case scenario in the loss of several vehicle functions with safety impacts and a risk of erratic behaviour of the vehicle.

Fix: Check and re-tighten the ground connections.

6 vehicles · built 10 Feb 2023 to 31 Jan 2024

On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.

Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.

569 vehicles · built 3 Jan 2022 to 9 Oct 2022

On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.

Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.

208 vehicles · built 3 Jan 2022 to 18 Nov 2022

On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.

Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.

150 vehicles · built 4 Jan 2022 to 24 Nov 2022

On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.

Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.

120 vehicles · built 4 Jan 2022 to 27 Jun 2022

On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.

Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.

618 vehicles · built 5 Jan 2022 to 15 Dec 2022

On affected vehicles the fuel tank is not to specification due to a deviation in the manufacturing process which could lead to a potential risk of fuel seepage.

Fix: Replace fuel tank.

17 vehicles · built 24 Oct 2023 to 30 Oct 2023

On affected vehicles the hydraulic power steering hose is not according to specification which could lead to deterioration in power steering assistance or sudden loss of steering assistance.

Fix: Check and replace power steering hose if necessary.

2,219 vehicles · built 20 Mar 2023 to 1 Sep 2023

Affected vehicles may have a tyre load index reported on the vehicle�s CoC lower than the rear axle capacity declared on the VIN label.

Fix: Replace the VIN label and provide an Addendum to the CoC (Certificate of Conformity).

210 vehicles · built 3 Oct 2022 to 15 Mar 2023

Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.

Fix: Check and replace the rear axle crossmember if necessary.

372 vehicles · built 24 May 2022 to 15 Jun 2022

Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.

Fix: Check and replace the rear axle crossmember if necessary.

372 vehicles · built 26 May 2022 to 15 Jun 2022

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

6,867 vehicles · built 8 Jul 2022 to 8 Nov 2022

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

6,867 vehicles · built 26 May 2020 to 17 Nov 2022

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

6,867 vehicles · built 20 Feb 2020 to 5 Dec 2022

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

6,867 vehicles · built 26 Feb 2020 to 5 Dec 2022

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

6,867 vehicles · built 31 Mar 2021 to 11 Nov 2022

Affected vehicles may face the risk of perforation of the HV battery reinforcing plate/battery cover over the vehicle lifetime due to water intrusion.

Fix: A protective wax will be applied between HV battery reinforcing plate and battery cover.

448 vehicles · built 20 Jan 2020 to 10 Jan 2023

Affected vehicles may experience HV Battery overheating that may lead to a HV Battery thermal runaway and in a worst case to a battery or vehicle fire.

Fix: The BMS (Battery Management System) will be reprogrammed with enhanced battery monitoring software.

1,197 vehicles · built 20 Jan 2020 to 2 Dec 2021

Affected vehicles may experience HV Battery overheating that may lead to a HV Battery thermal runaway and in a worst case to a battery or vehicle fire.

Fix: The BMS (Battery Management System) will be reprogrammed with enhanced battery monitoring software.

830 vehicles · built 20 Jan 2020 to 2 Dec 2021

Suspension wishbone bolts may have been incorrectly tightened during the production process.

Fix: Check and tighten wishbone bolts to the correct torque.

262 vehicles · built 22 Jul 2022 to 30 Nov 2022

There is an error in the software calibration of the traction battery control unit which could result in a loss of propulsion when driving.

Fix: Update the software of the traction battery control unit.

1,254 vehicles · built 6 Sep 2022 to 1 Dec 2022

There is an error in the software calibration of the traction battery control unit which could result in a loss of propulsion when driving.

Fix: Update the software of the traction battery control unit.

1,254 vehicles · built 3 May 2022 to 5 Dec 2022

There is an error in the software calibration of the traction battery control unit which could result in a loss of propulsion when driving.

Fix: Update the software of the traction battery control unit.

1,254 vehicles · built 29 Jun 2022 to 2 Dec 2022

There is an error in the software calibration of the traction battery control unit which could result in a loss of propulsion when driving.

Fix: Update the software of the traction battery control unit.

1,254 vehicles · built 8 Jul 2022 to 2 Dec 2022

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 30 Jul 2018

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 11 Dec 2020

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 2 Mar 2017 to 1 Apr 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 28 Oct 2020

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 7 Feb 2017 to 7 Mar 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 6 Jul 2020

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 7 Mar 2017 to 1 Apr 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 2 Mar 2017 to 31 Mar 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 7 Nov 2019

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 30 Jul 2018

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 31 Jan 2017 to 2 Apr 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 23 Feb 2017 to 20 Aug 2018

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 3 Mar 2017 to 31 Mar 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

652 vehicles · built 16 Jan 2017 to 3 Apr 2017

On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

13,740 vehicles · built 3 Apr 2017 to 4 Jul 2018

Some vehicles may have been equipped with an incorrectly positioned fuel pipe.

Fix: Check fuel pipe positioning correct if necessary and fit protective sleeve.

1,507 vehicles · built 29 Jan 2020 to 21 Jan 2022

Some vehicles may have been equipped with an incorrectly positioned fuel pipe.

Fix: Check fuel pipe positioning correct if necessary and fit protective sleeve.

1,507 vehicles · built 29 Jan 2020 to 21 Jan 2022

A rubber fuel pipe could have potentially been damaged during the manufacturing process which could lead to a fuel leak of the low pressure fuel pipe in the engine compartment that could in a worst-case scenario result in a risk of fire

Fix: To check and replace the fuel pipe

2 vehicles · built 22 Feb 2022 to 7 Jun 2022

The possibility that the lower metal engine protection guard could trap material between it and the underside of the engine exhaust system.

Fix: Replace the metal under engine protection guard with a different design to prevent the collection of material.

630 vehicles · built 8 Nov 2017 to 21 Sep 2021

Affected vehicles equipped with ESP (electronic stability program) may be fitted with the incorrect calibration when operating in All-Wheel Drive

Fix: Update the ESP calibration software

6 vehicles · built 30 Apr 2022 to 27 Aug 2022

On the affected vehicles equipped with a manual handbrake the efficiency of the handbrake and service brake may be compromised

Fix: Check the rear brake caliper references and replace as necessary

27 vehicles · built 20 Jan 2022 to 28 Jan 2022

On the affected vehicles equipped with a manual handbrake the efficiency of the handbrake and service brake may be compromised

Fix: Check the rear brake caliper references and replace as necessary

27 vehicles · built 20 Jan 2022 to 28 Jan 2022

The engine management software calibration could be incorrect causing engine stall.

Fix: Upload updated engine management software.

1,323 vehicles · built 20 Jun 2018 to 16 Jun 2020

The engine management software calibration could be incorrect causing engine stall.

Fix: Upload updated engine management software.

1,323 vehicles · built 16 May 2018 to 13 Mar 2020

The rear hub bearing locating bolts may be incorrectly tightened.

Fix: Check the torque of the rear hub bolts and replace the hub(s) and the bolts if necessary

1 vehicles · built 17 Nov 2021 to 17 Nov 2021

A high voltage battery where there is a mismatch in the voltage of the individual cells.

Fix: Replace the high voltage battery.

1 vehicles · built 4 Oct 2019 to 26 Nov 2019

The High Voltage Harness might not be to the correct specification.

Fix: Check the harness conformity and replace it if necessary.

11 vehicles · built 6 Apr 2022 to 6 Apr 2022

The High Voltage Harness might not be to the correct specification.

Fix: Check the harness conformity and replace it if necessary.

11 vehicles · built 28 Mar 2022 to 29 Apr 2022

Some vehicles have been produced without the required earthing connection on the protective cover of the high voltage connection box.

Fix: Check the affected vehicles and add the missing earthing connection wire between the box and the body if necessary.

12 vehicles · built 8 Sep 2020 to 19 Oct 2021

The High Voltage Harness might not be to the correct specification.

Fix: Check the harness conformity and replace it if necessary.

11 vehicles · built 28 Mar 2022 to 29 Apr 2022

The High Voltage Harness might not be to the correct specification.

Fix: Check the harness conformity and replace it if necessary.

11 vehicles · built 25 Mar 2022 to 29 Apr 2022

Tyres may have been damaged in the manufacturing plant.

Fix: Visually check the affected tyres and replace them if necessary.

3 vehicles · built 13 Nov 2021 to 17 Nov 2021

The rivet used to retain the curtain airbag in some vehicles could be incorrectly fitted.

Fix: Check if the curtain airbag is correctly retained by the rivet and if necessary refit the curtain airbag correctly.

38 vehicles · built 1 Mar 2022 to 6 Apr 2022

Affected vehicles may have been equipped with headrests on the front modular seat which do not conform to the design specification.

Fix: Check the conformity of the front headrests (presence of the catch); in cases of non-conformity the front headrests will be replaced.

359 vehicles · built 16 Nov 2021 to 16 Dec 2021

Affected vehicles may have been equipped with headrests on the front modular seat which do not conform to the design specification.

Fix: Check the conformity of the front headrests (presence of the catch); in cases of non-conformity the front headrests will be replaced.

359 vehicles · built 16 Nov 2021 to 16 Dec 2021

On some vehicles equipped with a Webasto auxiliary heating unit there is the possibility of a leakage of fuel from the auxiliary heater unit.

Fix: : Modify the Webasto additional heater unit power supply routing and update the body electronic control unit software.

8 vehicles · built 19 Apr 2017 to 26 Nov 2020

Vehicles may have an incorrect tightening torque on several rear axle component fixings.

Fix: Check and retighten all fixings to the correct torque settings.

1 vehicles · built 9 Dec 2021 to 9 Dec 2021

It is possible for the rear suspension spring to become detached from the lower locating cup.

Fix: Replace both rear suspension springs and their upper and lower locating cups.

685 vehicles · built 26 May 2020 to 20 Aug 2021

The rear window electrical harness could become displaced from its original position and present a potential thermal issue.

Fix: Check the routing of harness and replace the electrical harness if necessary. Add a fastening clip to ensure that the electrical harness will be maintained in its normal position.

1 vehicles · built 20 Oct 2015 to 13 Oct 2016

The rear window electrical harness could become displaced from its original position and present a potential thermal issue.

Fix: Check the routing of harness and replace the electrical harness if necessary. Add a fastening clip to ensure that the electrical harness will be maintained in its normal position.

1 vehicles · built 20 Oct 2015 to 13 Oct 2016

A possibility that the open circuit detection system could be over-sensitivite causing a number of operational issues including sudden power loss.

Fix: Download the latest software configuration check some electronic units and replace them if necessary.

194 vehicles · built 4 May 2019 to 29 Sep 2020

A possibility that the open circuit detection system could be over-sensitivite causing a number of operational issues including sudden power loss.

Fix: Download the latest software configuration check some electronic units and replace them if necessary.

194 vehicles · built 26 May 2020 to 10 Jun 2020

DS7 4x4 eTense vehicles equipped with 205/55 R19 97V A class Michelin Primacy 3 tyres may experience premature wearing of the insides of the rear tyres.

Fix: Fit A class tyres of dimension 235/50 R19 103V as well as different wheel rims.

134 vehicles · built 19 Feb 2019 to 18 May 2021

The right-hand side drive shaft outer joint may break due to incorrect hardening of the joint pinion during manufacturing.

Fix: Check and if necessary replace the right-hand side driveshaft depending on the production time stamp.

19 vehicles · built 10 Apr 2021 to 21 Apr 2021

The right-hand side drive shaft outer joint may break due to incorrect hardening of the joint pinion during manufacturing.

Fix: Check and if necessary replace the right-hand side driveshaft depending on the production time stamp.

19 vehicles · built 10 Apr 2021 to 21 Apr 2021

When the outside temperature is below 3�C there is loss of the front windscreen wiper function when the vehicle stops at 0 mph.

Fix: Downloading a new version of BSI software

748 vehicles · built 3 Sep 2020 to 18 Aug 2021

The seat fastening to the anchor plate is not correct to specification.�

Fix: Replace�the swivel plates onto which the front seats are anchored.�

11 vehicles · built 10 Feb 2021 to 19 Apr 2021

Possible sharp edges present on the components of the curtain airbag after deployment.

Fix: Install an additional metal location strap to the grab handle in the proximity of the curtain airbag.

13 vehicles · built 28 Sep 2020 to 31 Mar 2021

There may be an incorrect tightening torque application on the rear wheel hub.

Fix: Check the rear wheel bearing hub screws and if necessary replace the screws on both sides of the vehicle.

1 vehicles · built 23 Oct 2020 to 23 Apr 2021

The operation of the brake vacuum pump may be affected due to material detaching from the timing belt.

Fix: Check and if necessary replace the timing belt and other components of the braking assistance system including the vacuum pump. Additionally alter servicing schedules depending on usage.

3,101 vehicles · built 1 Jul 2014 to 8 Mar 2017

The operation of the brake vacuum pump may be affected due to material detaching from the timing belt.

Fix: Check and if necessary replace the timing belt and other components of the braking assistance system including the vacuum pump. Additionally alter servicing schedules depending on usage.

3,101 vehicles · built 1 Jul 2014 to 8 Mar 2017

The operation of the brake vacuum pump may be affected due to material detaching from the timing belt.

Fix: Check and if necessary replace the timing belt and other components of the braking assistance system including the vacuum pump. Additionally alter servicing schedules depending on usage.

3,101 vehicles · built 6 Sep 2014 to 13 Mar 2017

The operation of the brake vacuum pump may be affected due to material detaching from the timing belt.

Fix: Check and if necessary replace the timing belt and other components of the braking assistance system including the vacuum pump. Additionally alter servicing schedules depending on usage.

3,101 vehicles · built 17 Mar 2016 to 15 Mar 2017

The front lower ball-joint locating bolt and fixing nut might have been incorrectly tightened or not fitted correctly.

Fix: Replace the bolts and fixing nuts that attach both of the front lower ball joints to the front hub assemblies.

8 vehicles · built 3 Jan 2020 to 24 Mar 2021

On affected vehicles the wheel bolts may have an incomplete thread.

Fix: Check and if necessary replace the wheel bolts.

7 vehicles · built 10 Feb 2021 to 11 Feb 2021

The welding of the individual components of the towbar might not meet the correct specification.

Fix: Check the identity label and replace the tow bar if affected.

23 vehicles · built 21 Aug 2018 to 4 Mar 2021

Affected vehicles are not fully compliant to European regulation (165/2014 + EU 799/2016) covering the �Smart Tachograph� requirements.

Fix: Replacing the tachograph gearbox and on certain vehicles the windscreen depending on the specification of the vehicle.

1 vehicles · built 3 Jan 2019 to 14 Nov 2019

The welding of some components to the towbar assembly may not meet specification.

Fix: The replacement of the towbar.

13 vehicles · built 10 Sep 2020 to 21 Dec 2020

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

21,226 vehicles · built 20 Mar 2013 to 1 Apr 2017

A single wheel bolt on both Right-hand wheels may not be tightened to the correct tightening torque.

Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

7 vehicles · built 24 Sep 2020 to 11 Nov 2020

A single wheel bolt on both Right-hand wheels may not be tightened to the correct tightening torque.

Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

7 vehicles · built 24 Sep 2020 to 11 Nov 2020

A single wheel bolt on both left-hand wheels may not be tightened to the correct tightening torque.

Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

12 vehicles · built 24 Sep 2020 to 11 Nov 2020

A single wheel bolt on both left-hand wheels may not be tightened to the correct tightening torque.

Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

12 vehicles · built 24 Sep 2020 to 11 Nov 2020

On affected vehicles there may be a defect in the operation of the urea injector which may become blocked leading to NOx emissions exceeding regulatory limits.

Fix: Update the ECU software to avoid the blockage of the urea injector

168 vehicles · built 1 Oct 2019 to 6 Oct 2020

On affected vehicles some rear seat belts may have incorrect stitching on the belt material to connect the buckle to the anchor plate.

Fix: Check seat belts and relace if necessary.

3 vehicles · built 27 Aug 2020 to 30 Sep 2020

The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification.

Fix: Replace the DPF on affected vehicles.

432 vehicles · built 1 Apr 2019 to 15 Jul 2019

The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification.

Fix: Replace the DPF on affected vehicles.

432 vehicles · built 1 Apr 2019 to 15 Jul 2019

The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification.

Fix: Replace the DPF on affected vehicles.

432 vehicles · built 1 Apr 2019 to 15 Jul 2019

The front hub assembly fixing on to the front suspension damper may not be correct to specification.

Fix: Check the front hub assembly and replace if required.

1,955 vehicles · built 2 May 2019 to 12 Jul 2019

A rear seat longitudinal adjustment lever may not lock properly.

Fix: Check affected seat frames and replacing them if necessary.

3 vehicles · built 19 Nov 2019 to 6 Feb 2020

Affected Vehicles have been fitted with an exhaust system which is not correct to specification

Fix: Install correct exhaust system catalytic convertor.

14 vehicles · built 1 Aug 2019 to 31 Jan 2020

Water may penetrate into the brake vacuum pump causing corrosion.

Fix: Replace the brake vacuum pump.

262 vehicles · built 11 Oct 2010 to 26 Jun 2019

Front air bag igniters may not deploy correctly.

Fix: Check and if necessary replace the affected front airbags.

1,080 vehicles · built 2 Sep 2009 to 12 Apr 2017

Front air bag igniters may not deploy correctly.

Fix: Check and if necessary replace the affected front airbags.

1,080 vehicles · built 2 Sep 2009 to 12 Apr 2017

Front air bag igniters may not deploy correctly.

Fix: Check and if necessary replace the affected front airbags.

1,080 vehicles · built 2 Sep 2009 to 12 Apr 2017

Front air bag igniters may not deploy correctly.

Fix: Check and if necessary replace the affected front airbags.

1,080 vehicles · built 2 Sep 2009 to 12 Apr 2017

Front air bag igniters may not deploy correctly.

Fix: Check and if necessary replace the affected front airbags.

1,080 vehicles · built 2 Sep 2009 to 12 Apr 2017

The vehicles may be affected by an incorrect torque applied on the rear axle screws.

Fix: Replace and tighten the screws to the correct torque.

86 vehicles · built 2 Jul 2019 to 22 Oct 2019

The vehicles may be affected by a defect in the urea injector which might block and lead to NOx emissions going out of the regulatory limits.

Fix: Updating the ECU software to avoid the gradual blocking of the urea injector

1,689 vehicles · built 1 Oct 2019 to 17 Mar 2020

The vehicles may be affected by a defect in the urea injector which might block and lead to NOx emissions going out of the regulatory limits.

Fix: Updating the ECU software to avoid the gradual blocking of the urea injector

1,689 vehicles · built 1 Oct 2019 to 17 Mar 2020

The inner tie rods connecting the steering rack to the track rod end are not correct to specification

Fix: Replace the steering rack inner tie rods (on both sides)

428 vehicles · built 2 Dec 2019 to 18 Jan 2020

The steering geometry could be incorrectly set due to an incorrectly calibrated setting rig in the manufacturing plant.

Fix: Check the steering alignment and adjusting if set incorrectly. If the front tyres are worn these will also be replaced.

10 vehicles · built 12 Sep 2019 to 18 Mar 2020

The tightening and positioning of the seat belt lower bolts may be incorrect.

Fix: This campaign consists of checking and if necessary correcting both the position of the bolt and the tightening torque of all of the lower fixings of the seat belts.

3,111 vehicles · built 17 Dec 2018 to 26 Apr 2019

The fuel pipes under the body may have been damaged over time due to a relative movement between these pipes and their surroundings

Fix: Check the condition of the fuel pipes and replacing them if necessary. New protection will be fitted on all vehicles to prevent this damage in the future.

21,087 vehicles · built 1 May 2016 to 9 Sep 2019

Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.

Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required

84 vehicles · built 8 May 2019 to 30 Oct 2019

The fuel pipes under the body may have been damaged over time due to a relative movement between these pipes and their surroundings

Fix: Check the condition of the fuel pipes and replacing them if necessary. New protection will be fitted on all vehicles to prevent this damage in the future.

21,087 vehicles · built 1 May 2016 to 9 Sep 2019

The tightening of some rear suspension fixings may not be correct to specification

Fix: Correcting some tightening torques and replacing some nuts and bolts.

4 vehicles · built 13 Aug 2019 to 24 Sep 2019

A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake

Fix: Check and if necessary replace the callipers.

84 vehicles · built 22 Mar 2019 to 15 Apr 2019

The rear brake hoses may have been damaged over time due to inappropriate movement between these hoses and a clip.

Fix: Check the condition of the rear left-hand and right-hand brake hoses and replacing them if necessary. A new retaining clip is fitted on all vehicles to prevent this relative movement.

22,882 vehicles · built 5 Jan 2016 to 6 Sep 2019

The tightening of the seat belt fixings and of certain earth cables may not conform to specification.

Fix: Tightening of the seat belt fixings and of certain earth cables

85 vehicles · built 17 Dec 2018 to 26 Apr 2019

The tightening of the seat belt fixings and of certain earth cables may not conform to specification.

Fix: Tightening of the seat belt fixings and of certain earth cables

85 vehicles · built 17 Dec 2018 to 26 Apr 2019

A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake

Fix: Check and if necessary replace the callipers.

84 vehicles · built 22 Mar 2019 to 15 Apr 2019

Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.

Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required

84 vehicles · built 8 May 2019 to 30 Oct 2019

The tightening and positioning of the seat belt lower bolts may be incorrect.

Fix: This campaign consists of checking and if necessary correcting both the position of the bolt and the tightening torque of all of the lower fixings of the seat belts.

3,111 vehicles · built 17 Dec 2018 to 26 Apr 2019

The tightening of some rear suspension fixings may not be correct to specification

Fix: Correcting some tightening torques and replacing some nuts and bolts.

4 vehicles · built 13 Aug 2019 to 24 Sep 2019

The rear brake hoses may have been damaged over time due to inappropriate movement between these hoses and a clip.

Fix: Check the condition of the rear left-hand and right-hand brake hoses and replacing them if necessary. A new retaining clip is fitted on all vehicles to prevent this relative movement.

22,882 vehicles · built 5 Jan 2016 to 6 Sep 2019

Certain rear suspension fixing bolts may not conform to specification which could cause them to break

Fix: Replace the affected bolts.

4 vehicles · built 5 Nov 2019 to 17 Jan 2020

The routing of the rear brake pipes may not be correct and could cause them to fail.

Fix: Check and replace affected pipes if necessary

15 vehicles · built 26 Apr 2019 to 16 Oct 2019

The urea injector may temporarily block

Fix: Update the engine management software

1 vehicles · built 26 Nov 2018 to 26 Nov 2018

Certain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment

Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required.

15 vehicles · built 15 Oct 2019 to 31 Oct 2019

Certain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment

Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required.

15 vehicles · built 15 Oct 2019 to 31 Oct 2019

Some trailer tow ball fixing bolts may be damaged.

Fix: Replace the two tow ball fixing bolts.

10 vehicles · built 2 Sep 2019 to 30 Oct 2019

Steering columns were produced not according to specification

Fix: Replacement of the steering column.

111 vehicles · built 30 Jun 2019 to 15 Jul 2019

The passenger outer seat belts may not be correct to specification

Fix: Replace the front outer passenger seat belt.

12,796 vehicles · built 1 Jul 2018 to 8 Nov 2019

The fitting of the rear left brake pipe may not be correct to specification

Fix: Check the correct fitting of the left hand brake pipe adjust or replace the pipe as necessary

3 vehicles · built 22 Jul 2019 to 4 Sep 2019

The brake pipe fixings may not conform to specification

Fix: Checking and repairing these fixings and replacing any damaged pipes as necessary

16,144 vehicles · built 5 Jul 2016 to 17 Jun 2019

Possible non-conformity in the fuel tank manufacturing process could result in fuel seepage

Fix: Check and change fuel tank if necessary

1,090 vehicles · built 14 May 2019 to 14 Sep 2019

Engine management software issue could result in incorrect emission levels.

Fix: Update the engine management software.

16,144 vehicles · built 1 Feb 2017 to 12 Apr 2019

Engine management software issue could result in incorrect emission levels.

Fix: Update the engine management software.

16,144 vehicles · built 1 Feb 2017 to 12 Apr 2019

Engine management software issue could result in incorrect emission levels.

Fix: Update the engine management software.

16,144 vehicles · built 1 Feb 2017 to 12 Apr 2019

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

5,290 vehicles · built 25 Sep 2013 to 15 May 2016

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

5,290 vehicles · built 25 Sep 2013 to 15 May 2016

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

5,290 vehicles · built 25 Sep 2013 to 15 May 2016

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

5,290 vehicles · built 25 Sep 2013 to 15 May 2016

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

5,290 vehicles · built 25 Sep 2013 to 15 May 2016

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

5,290 vehicles · built 25 Sep 2013 to 15 May 2016

Counterweight could become detached and fall from the vehicle

Fix: Add two new fixings for each counterweight

792 vehicles · built 25 Feb 2014 to 29 Mar 2016

It is possible that the bonnet hook may not be secured correctly with securing nuts.

Fix: Check and if necessary fit new nuts or replace the bonnet assembly.

10 vehicles · built 3 Apr 2018 to 9 May 2018

There is a risk of inadvertent release to the front outer passenger seat belt.

Fix: Modifying the central seat buckle with foam and heat-shrinkable protective tubing.

16,122 vehicles · built 16 Apr 2015 to 23 Apr 2019

There is a risk of inadvertent release to the front outer passenger seat belt.

Fix: Modifying the central seat buckle with foam and heat-shrinkable protective tubing.

16,122 vehicles · built 16 Apr 2015 to 23 Apr 2019

Possible slackening of the front wishbone ball joint.

Fix: Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced.

11,023 vehicles · built 16 Apr 2015 to 23 Apr 2019

Possible slackening of the front wishbone ball joint.

Fix: Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced.

11,023 vehicles · built 21 Sep 2015 to 23 Nov 2018

Possible slackening of the front wishbone ball joint.

Fix: Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced.

11,023 vehicles · built 16 Apr 2015 to 23 Apr 2019

Possible slackening of the front wishbone ball joint.

Fix: Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced.

11,023 vehicles · built 21 Sep 2015 to 23 Nov 2018

A plastic component inside the exhaust line could under certain circumstances damage the diesel particle filter.

Fix: Check and if necessary replace the particle filter.

148 vehicles · built 5 Jan 2018 to 3 May 2018

A plastic component inside the exhaust line could under certain circumstances damage the diesel particle filter.

Fix: Check and if necessary replace the particle filter.

148 vehicles · built 5 Jan 2018 to 3 May 2018

A plastic component inside the exhaust line could under certain circumstances damage the diesel particle filter.

Fix: Check and if necessary replace the particle filter.

148 vehicles · built 5 Jan 2018 to 3 May 2018

The handbrake mechanism may not be correct to specification.

Fix: Check the handbrake mechanism and if necessary replace the hand brake lever.

744 vehicles · built 7 Nov 2017 to 8 Jan 2019

The battery charge program may not be correct to specification.

Fix: Updating the Stop Start function management software.

2 vehicles · built 25 Nov 2011 to 1 Apr 2015

The wires in one of the connectors of the seats position sensor may not be correct

Fix: Correcting the wires in the connector of the seats position sensor.

12,649 vehicles · built 2 Dec 2016 to 13 Dec 2018

The rear suspension wishbone mountings bolts may not be correct to specification.

Fix: Replacement of the rear suspension wishbone bolts.

313 vehicles · built 6 Oct 2016 to 19 Oct 2018

The fixing bolt of the front Suspension wishbone may not be correct to specification.

Fix: Replace the fixing bolts and nuts of the front suspension wishbones.

47 vehicles · built 1 Jul 2016 to 11 Sep 2018

The fixing bolt of the front Suspension wishbone may not be correct to specification.

Fix: Replace the fixing bolts and nuts of the front suspension wishbones.

47 vehicles · built 1 Jul 2016 to 11 Sep 2018

The rear suspension wishbone mountings bolts may not be correct to specification.

Fix: Replacement of the rear suspension wishbone bolts.

313 vehicles · built 6 Oct 2016 to 19 Oct 2018

The steering rack assembly may not be correct to specification.

Fix: Replace the steering rack assembly and the fixings.

10 vehicles · built 25 Oct 2016 to 21 Sep 2018

The steering rack assembly may not be correct to specification.

Fix: Replace the steering rack assembly and the fixings.

10 vehicles · built 25 Oct 2016 to 21 Sep 2018

Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.

Fix: Increasing the tightening torque of the ball joint and adding thread lock to the ball joint threads if the ball joint threads are found to be rusty the ball joint will be replaced.

2,633 vehicles · built 1 Jan 2015 to 30 Nov 2018

The air conditioning compressor pulley could break and damage other components.

Fix: Replace the air conditioning compressor pulley and if necessary the protective cover.

2,310 vehicles · built 8 Sep 2015 to 27 Mar 2018

The air conditioning compressor pulley could break and damage other components.

Fix: Replace the air conditioning compressor pulley and if necessary the protective cover.

2,310 vehicles · built 8 Sep 2015 to 27 Mar 2018

Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.

Fix: Increasing the tightening torque of the ball joint and adding thread lock to the ball joint threads if the ball joint threads are found to be rusty the ball joint will be replaced.

2,633 vehicles · built 1 Jan 2015 to 30 Nov 2018

The universal clamp fixing bolt is not correctly fitted in the recess at the end of the steering column.

Fix: Check and if necessary refit the steering column universal joint fixing.

78 vehicles · built 4 Jul 2018 to 12 Jul 2018

On the affected vehicles the bonding of the rear door window glass to the hinge assemblies may not conform to specification.

Fix: Check and if necessary replace the rear window or re- bond the rear window glass hinges.

51,349 vehicles · built 1 Feb 2005 to 21 Nov 2013

Ancillaries drive belt tensioner mounting may not be correct to specification.

Fix: Check and if necessary replace the ancillaries drive belt tensioner.

9 vehicles · built 20 Mar 2008 to 17 Nov 2011

Ancillaries drive belt tensioner mounting may not be correct to specification.

Fix: Check and if necessary replace the ancillaries drive belt tensioner.

9 vehicles · built 13 Dec 2011 to 13 Dec 2011

There is a possibility that the sunroof glass assembly could detach itself from the outer frame

Fix: Replace the sunroof assembly.

15 vehicles · built 17 Apr 2007 to 18 Sep 2009

On the affected vehicles the tightening torques of the anti-theft wheel bolts may not be to the correct to specification.

Fix: The remedy involves correcting the anti-theft wheel bolts tightening torques.

4,595 vehicles · built 1 Sep 2017 to 29 May 2018

On the affected vehicles the crimping preventing lateral movement of the steering column bearing may not be correct to specification. This may result in noise and play in the steering. Ultimately it could lead to steering malfunction.

Fix: The remedy involves checking the crimping on the steering column and replacing the steering column if necessary.

392 vehicles · built 11 Jan 2018 to 22 Jan 2018

The tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime.

Fix: The manufacturer�s remedy involves the replacement of the tow ball support bracket with a redesigned version.

103 vehicles · built 13 Nov 2015 to 5 Oct 2017

The tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime.

Fix: The manufacturer�s remedy involves the replacement of the tow ball support bracket with a redesigned version.

103 vehicles · built 13 Nov 2015 to 5 Oct 2017

The cooling system strategy and the maximum temperature alert could cause the engine to overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning system there is no driver alert.

Fix: The remedy involves downloading new engine management software.

660 vehicles · built 17 Feb 2016 to 26 Feb 2018

The cooling system strategy and the maximum temperature alert could cause the engine to overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning system there is no driver alert.

Fix: The remedy involves downloading new engine management software.

660 vehicles · built 17 Feb 2016 to 26 Feb 2018

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque.

37 vehicles · built 27 Apr 2018 to 28 May 2018

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque.

37 vehicles · built 4 May 2018 to 30 May 2018

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque.

37 vehicles · built 30 Apr 2018 to 2 Jun 2018

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque.

37 vehicles · built 3 May 2018 to 5 May 2018

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque.

37 vehicles · built 3 May 2018 to 1 Jun 2018

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque.

37 vehicles · built 30 Apr 2018 to 2 Jun 2018

Engine could overheat leading to failure in extreme cases

Fix: Download new engine management software

138 vehicles · built 3 Mar 2016 to 8 Mar 2018

On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to indicate if the ECU is incorrect.

Fix: The manufacturer has no simple method to check the internal component. Therefore all ECU's in affected vehicles to be changed as a precaution.

110 vehicles · built 13 Nov 2017 to 20 Nov 2017

On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to indicate if the ECU is incorrect.

Fix: The manufacturer has no simple method to check the internal component. Therefore all ECU's in affected vehicles to be changed as a precaution.

110 vehicles · built 13 Nov 2017 to 26 Nov 2017

On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to indicate if the ECU is incorrect.

Fix: The manufacturer has no simple method to check the internal component. Therefore all ECU's in affected vehicles to be changed as a precaution.

110 vehicles · built 10 Nov 2017 to 14 Nov 2017

On the affected vehicles the windscreen wiper motor breather system may not be To the correct specification. This could in some cases result in water ingress leading to jamming of the motor due to corrosion. This could cause the wipers to cease operation or not start which in turn could result in restricted visibility for the driver.

Fix: Replace the windscren wiper motor and one of the windscreen wiper mechanism rods.

3,211 vehicles · built 16 Apr 2007 to 27 Apr 2012

On affected vehicles the locking nut of the rear wheel hub bearings may not be correct to specification. In extreme cases this may affect control of the vehicle.

Fix: The recall consists of checking the hub nut and if the locking of the nut does not conform to specification replacing the stub axle and the hub.

5 vehicles · built 8 Sep 2017 to 14 Sep 2017

The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.

Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature.

2,098 vehicles · built 5 Dec 2012 to 21 Apr 2015

The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.

Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature.

2,098 vehicles · built 17 Jul 2014 to 30 Apr 2015

The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.

Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature.

2,098 vehicles · built 15 May 2013 to 24 Apr 2015

The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.

Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature.

2,098 vehicles · built 1 Dec 2014 to 8 Apr 2015

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

198 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

198 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

75 vehicles · built 1 Oct 2017 to 30 Nov 2017

The bonnet inner skin may not be adequately retained. This may cause the bonnet to vibrate or distort. In extreme cases the skin could detach.

Fix: On affected vehicles apply additional adhesive between the bonnet skin and its inner panel.

6,848 vehicles · built 1 Sep 2016 to 6 Apr 2017

An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.

Fix: On affected vehicles replace the passenger's air bag assembly

257 vehicles

Due to a deviation in the production process certain suspension and steering fixings may not have been tightened to the correct torque.

Fix: On affected vehicles check fixings as indicated by the manufacturer. Replace any damaged fixings and tighten all relevant fixings to correct torque.

127 vehicles · built 16 Aug 2017 to 20 Sep 2017

A nonconformity of the windscreen wiper motor breather system could in some cases result in the entry of water and complete jamming of the motor due to internal corrosion.

Fix: On affected vehicles replace the wiper motor.

11 vehicles

Non-conformity of a tailgate strut internal component may allow corrosion to develop. This may cause the strut to fail and the tailgate may not be held open.

Fix: On affected vehicles replace the struts.

11 vehicles

The striker wire on the bonnet lining may not have sufficient support to prove it with the security for its intended purpose. This can lead to incorrect locking of the bonnet over time and could result in an unintentional release of the bonnet.

Fix: On affected vehicles inspect and if requiredfit an additional strengthener to retain the striker cable on the inner panel of the bonnet. In some cases it may be necessary to replace the bonnet.

16,984 vehicles · built 9 Sep 2015 to 16 May 2017

The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.

Fix: On affected vehicles check the positioning of the terminaL. Correct it if necessary and add additional protection.

9 vehicles · built 28 Jun 2016 to 15 Jul 2016

The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.

Fix: On affected vehicles check the positioning of the terminal and correct it if necessary.

12 vehicles · built 13 Jan 2016 to 30 Jun 2016

The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.

Fix: On affected vehicles check the positioning of the terminal and correct it if necessary.

12 vehicles · built 13 Jan 2016 to 30 Jun 2016

Possible non-compliance of an internal component of the starter control relay could cause damage by overheating. This could cause unintended operation of the starter motor and in extreme instances; there is a risk of fire.

Fix: Check and if necessary replace the Electrical relay

151 vehicles · built 25 Jun 2016 to 10 Sep 2016

Possible non-compliance of an internal component of the starter control relay could cause damage by overheating. This could cause unintended operation of the starter motor and in extreme instances; there is a risk of fire.

Fix: Check and if necessary replace the Electrical relay

151 vehicles · built 25 Jun 2016 to 10 Sep 2016

The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit.

Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary.

2,014 vehicles · built 15 May 2013 to 2 Apr 2017

The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit.

Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary.

2,014 vehicles · built 15 May 2013 to 2 Apr 2017

The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit.

Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary.

2,014 vehicles · built 15 May 2013 to 2 Apr 2017

The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit.

Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary.

2,014 vehicles · built 15 May 2013 to 2 Apr 2017

A component within the left-hand curtain airbag may not conform to specification and the air bag may not deploy correctly.

Fix: On affected vehicles replace the left hand curtain air bag.

8 vehicles · built 4 Jan 2017 to 22 Feb 2017

A component within the right-hand curtain airbag may not conform to specification and the air bag may not deploy correctly.

Fix: On affected vehicles replace the right hand curtain air bag.

5 vehicles · built 4 Jan 2017 to 22 Feb 2017

The tightness of one of the air conditioning compressor support mountings may not be correct to specification. This will result in an abnormal noise and possibility of the compressor becoming insecure

Fix: On affected vehicles check the tightness of the support; where necessary the support will be replaced.

2,077 vehicles · built 1 Jan 2016 to 6 Mar 2017

On the affected vehicles the bonding of the front bumper trim may not conform to specification. Over time the bonding may allow the trim to detach

Fix: Check the bonding of the front bumper lower trim and rectify or replace it if necessary

331 vehicles · built 20 Jan 2016 to 24 Nov 2016

Due to a non conformity in production an engine fuel pie protective sleeve could cause wear due to contact with surrounding components.This may cause a fuel leak

Fix: On affected vehicles reposition the fuel pipe protective sleeve or replace the pipe if wear is noted.

8 vehicles · built 1 Sep 2016 to 1 Feb 2017

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

3,607 vehicles · built 15 Jun 2016 to 11 Oct 2016

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

3,607 vehicles · built 15 Jun 2016 to 11 Oct 2016

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

3,607 vehicles · built 15 Jun 2016 to 11 Oct 2016

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

3,607 vehicles · built 15 Jun 2016 to 11 Oct 2016

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

3,607 vehicles · built 15 Jun 2016 to 11 Oct 2016

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

3,607 vehicles · built 15 Jun 2016 to 11 Oct 2016

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Fix: On affected vehicles replace the gearbox actuator

16 vehicles · built 25 Apr 2016 to 29 Aug 2016

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Fix: On affected vehicles replace the gearbox actuator

16 vehicles · built 26 Apr 2016 to 29 Aug 2016

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Fix: On affected vehicles replace the gearbox actuator

16 vehicles · built 26 Apr 2016 to 29 Aug 2016

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Fix: On affected vehicles replace the gearbox actuator

16 vehicles · built 26 Apr 2016 to 29 Aug 2016

The ignition module which triggers the front seat airbag may not deploy in the event of an impact. There is no indication to the driver the unit is faulty.

Fix: Recall the vehicles that are likely to be affected and replace the front seat airbag unit.

65 vehicles · built 8 Sep 2016 to 14 Oct 2016

On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended deployment is possible.

Fix: On affected vehicles add extra sealant and replace wet or water damaged components.

1,653 vehicles · built 15 Oct 2015 to 27 Oct 2016

It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should experience either wet carpets and or a possible damp smell. However the ingress of water into the cabin could affect the electrical operation of the airbag module which could lead to an unexpected deployment of the airbag.

Fix: Recall all affected vehicles to add additional sealant to the body interfaces and if required to replace any interior components damaged by the water ingress.

141 vehicles · built 15 Oct 2015 to 27 Oct 2016

The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo

Fix: Check servo security and where necessary replace the brake servo unit

2 vehicles · built 13 Apr 2016 to 29 Jun 2016

The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo

Fix: Check servo security and where necessary replace the brake servo unit

2 vehicles · built 13 Apr 2016 to 29 Jun 2016

On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended deployment is possible.

Fix: On affected vehicles add extra sealant and replace wet or water damaged components.

1,653 vehicles · built 15 Oct 2015 to 27 Oct 2016

It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However if not rectified there is a risk that the wheels may become damaged over time or the wheel could in extreme cases detach from the vehicle whilst driving. This could cause loss of control of the vehicle.

Fix: Recall all affected vehicles to check the tightness of the road wheel bolts and rectify as necessary. In certain cases the replacement of the bolt(s) and wheel(s) may be necessary.

83 vehicles · built 17 Feb 2016 to 29 Sep 2016

On the affected vehicles a possible non-conformity in the positioning of the fuel filler neck seal near the filler cap could cause a fuel leak when completely filling up the tank.

Fix: Checking and if necessary refit seal.

54 vehicles · built 2 Feb 2016 to 9 Jul 2016

It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions of certain electrical equipment even in very rare cases causing the engine to cut-off or airbags malfunction.

Fix: Recall all affected vehicles to check tightness of the ground connections and airbag control unit fixings. If required these will need rectification.

8 vehicles · built 10 May 2016 to 19 Aug 2016

The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.

Fix: On affected vehicles replace the front shock absorber retaining bolts.

1 vehicles

It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions of certain electrical equipment even in very rare cases causing the engine to cut-off or airbags malfunction.

Fix: Recall all affected vehicles to check tightness of the ground connections and airbag control unit fixings. If required these will need rectification.

8 vehicles · built 10 May 2016 to 19 Aug 2016

It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should experience either wet carpets and or a possible damp smell. However the ingress of water into the cabin could affect the electrical operation of the airbag module which could lead to an unexpected deployment of the airbag.

Fix: Recall all affected vehicles to add additional sealant to the body interfaces and if required to replace any interior components damaged by the water ingress.

141 vehicles · built 15 Oct 2015 to 27 Oct 2016

On the affected vehicles a possible non-conformity in the positioning of the fuel filler neck seal near the filler cap could cause a fuel leak when completely filling up the tank.

Fix: Checking and if necessary refit seal.

54 vehicles · built 2 Feb 2016 to 9 Jul 2016

Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.

Fix: Check affected vehicles and where necessary replace the steering rack.

2 vehicles · built 13 Jun 2016 to 8 Sep 2016

Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.

Fix: Check affected vehicles and where necessary replace the steering rack.

2 vehicles · built 13 Jun 2016 to 8 Sep 2016

It is possible that some suspension and brake components were not tightened correctly when building the car. It is possible for the components to become insecure and develop increase in noise from the suspension and increase of free play in steering. If not corrected the directional control and brakes could be affected.

Fix: Recall the vehicles that are likely to be affected and tighten the affected components to the required specifiaction: rear suspension fixings on the body brake calipers on their supports front subframe fixings on the body front hub carrier fixings on the subframe and on the shock absorbers brake hoses on the calipers and fixings of the underbody deflectors.

170 vehicles · built 12 May 2016 to 31 Oct 2016

It has been identified that the striker wire on the bonnet lining may not have sufficient support to prove it with the security for its intended purpose. This can lead to incorrect locking of the bonnet over time and could result in an unintentional release of the bonnet. The driver will received early warning signs or symptoms by the incorrect locking of the bonnet.

Fix: Recall all affected vehicles to inspect and if required an additional strengthener to retain the striker cable on the inner panel of the bonnet. In some cases there maybe a requirement to replace the bonnet.

11,236 vehicles · built 26 May 2014 to 8 Sep 2015

It has been identified that the bonnet striker support may corrode. If this corrosion is not treated there is a possibility the bonnet striker support may fail which will allow the bonnet to open whilst the vehicle is in motion. Early warning signs or symptoms of corrosion can be seen by the driver around the bonnet striker support and on the leading edge of the bonnet also the bonnet may not lock correctly.

Fix: Recall affected vehicles to inspect the area around the bonnet striker support and take preventive action to protect the area from corrosion which may include the replacement of the bonnet if required.

41,893 vehicles · built 5 May 2016 to 27 May 2016

It has been identified that the bonnet striker support may corrode. If this corrosion is not treated there is a possibility the bonnet striker support may fail which will allow the bonnet to open whilst the vehicle is in motion. Early warning signs or symptoms of corrosion can be seen by the driver around the bonnet striker support and on the leading edge of the bonnet also the bonnet may not lock correctly.

Fix: Recall affected vehicles to inspect the area around the bonnet striker support and take preventive action to protect the area from corrosion which may include the replacement of the bonnet if required.

41,893 vehicles · built 19 Nov 2009 to 27 May 2016

The front suspension wishbones fixing bolts may not be to the correct specification which could lead to a risk of them breaking. This may affetc the driver's ability to control the vehicle.

Fix: On affected vehicles replace the wishbone fixing bolts.

2,662 vehicles · built 21 Nov 2014 to 26 Jan 2015

In the event of emergency braking or during an ESP regulation phase (e.g. avoiding manoeuvre) the hydraulic block may not prevent the locking of a wheel which could affect control of the vehicle.

Fix: On affected vehicles replace the braking system hydraulic block

787 vehicles · built 1 Apr 2016 to 21 Apr 2016

In the event of emergency braking or during an ESP regulation phase (e.g. avoiding manoeuvre) the hydraulic block may not prevent the locking of a wheel which could affect control of the vehicle.

Fix: On affected vehicles replace the braking system hydraulic block

787 vehicles · built 1 Apr 2016 to 21 Apr 2016

In the event of emergency braking or during an ESP regulation phase (e.g. avoiding manoeuvre) the hydraulic block may not prevent the locking of a wheel which could affect control of the vehicle.

Fix: On affected vehicles replace the braking system hydraulic block

787 vehicles · built 1 Apr 2016 to 21 Apr 2016

In the event of emergency braking or during an ESP regulation phase (e.g. avoiding manoeuvre) the hydraulic block may not prevent the locking of a wheel which could affect control of the vehicle.

Fix: On affected vehicles replace the braking system hydraulic block

787 vehicles · built 1 Apr 2016 to 21 Apr 2016

The bonnet may not close correctly over time because a possible non-conformity with the fixing of the bonnet catch. The driver may notice in certain cases difficulty in opening or closing the bonnet easily or vibrations or slight movement of the bonnet when driving. The risk is incorrect closing of the bonnet which could lead without any warning to unwanted opening when driving.

Fix: Recall the the vehicles that are likely to be affected and check the front bumper support. Where necessary the front bumper support will be replaced.

767 vehicles · built 28 Apr 2016 to 23 Aug 2016

On affected vehicles the driver's air bag inflation device may not conform to specification. As a result may not deploy correctly during an impact.

Fix: Replace the driver's air bag module on affected vehicles

967 vehicles · built 26 Apr 2016 to 2 May 2016

On affected vehicles the driver's air bag inflation device may not conform to specification. As a result may not deploy correctly during an impact.

Fix: Replace the driver's air bag module on affected vehicles

967 vehicles · built 26 Apr 2016 to 2 May 2016

On affected vehicles the driver's air bag inflation device may not conform to specification. As a result may not deploy correctly during an impact.

Fix: Replace the driver's air bag module on affected vehicles

967 vehicles · built 26 Apr 2016 to 2 May 2016

The fuel injectors supply rail could develop a leak over a period of time leading to a drop in fuel pressure in the injector supply rail which can affect the operation of the stop start system. In some extreme cases the engine might not restart and a spray of petrol under the bonnet may occur which is a fire risk.

Fix: Recall the vehicles that are likely to be affected and check the fuel injector supply rail. Where necessary replace the fuel injector supply rail.

3 vehicles · built 15 May 2014 to 23 May 2014

The fuel injectors supply rail could develop a leak over a period of time leading to a drop in fuel pressure in the injector supply rail which can affect the operation of the stop start system. In some extreme cases the engine might not restart and a spray of petrol under the bonnet may occur which is a fire risk.

Fix: Recall the vehicles that are likely to be affected and check the fuel injector supply rail. Where necessary replace the fuel injector supply rail.

3 vehicles · built 15 May 2014 to 23 May 2014

A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.

Fix: The manufacturer will contact keepers of affected vehicles and advise not to use the vehicle. Examine vehicles and on those with the affected component replace the steering column.

342 vehicles · built 9 Sep 2014 to 15 Oct 2014

Due to none conformity during manufacture the resistance of the insulated base inside the Engine Control Unit (ECU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.

Fix: Recall the vehicles that are likely to be affected and replace the engine ECU.

19 vehicles · built 6 Aug 2011 to 28 Mar 2012

A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.

Fix: On affected vehicles check and where necessary replace door locks.

919 vehicles · built 18 Aug 2015 to 19 Nov 2015

The seat belt buckle fitted to the second row rear seat/s may have been damaged during the production process at the supplier. In the event of an impact the seat belt buckle strap could fail and not restrain the occupant correctly.

Fix: Recall the vehicles that are likely to be affected to check the batch numbers and where necessary replace the seat belt buckle.

2,238 vehicles · built 14 Sep 2015 to 10 Nov 2015

A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.

Fix: On affected vehicles check and where necessary replace door locks.

1,292 vehicles · built 19 Aug 2015 to 21 Nov 2015

A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.

Fix: On affected vehicles check and where necessary replace door locks.

1,914 vehicles · built 5 May 2015 to 20 Nov 2015

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

17 vehicles · built 25 Jan 2016 to 15 Feb 2016

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

17 vehicles · built 25 Jan 2016 to 15 Feb 2016

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

17 vehicles · built 25 Jan 2016 to 15 Feb 2016

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

17 vehicles · built 25 Jan 2016 to 15 Feb 2016

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

17 vehicles · built 25 Jan 2016 to 15 Feb 2016

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

17 vehicles · built 25 Jan 2016 to 15 Feb 2016

The tightening torque for the front and rear right hand seat belt lower mountings may not be correct to specification. This could lead to the mountings detaching and in a collision additional injury to the driver.

Fix: Recall the vehicles that are likely to be affected and rectify the tightening torques for the front and rear right hand seat belt lower mountings.

30 vehicles · built 13 Jul 2015 to 14 Jul 2015

The tightening torque for the front and rear right hand seat belt lower mountings may not be correct to specification. This could lead to the mountings detaching and in a collision additional injury to the driver.

Fix: Recall the vehicles that are likely to be affected and rectify the tightening torques for the front and rear right hand seat belt lower mountings.

30 vehicles · built 13 Jul 2015 to 14 Jul 2015

The electrical switch of the steering lock may not conform to specification. This could cause the intermittent unwanted switching off of information displays on the instrument panel.

Fix: Recall the vehicles that are likely to be affected and replace the ignition switch.

5,641 vehicles · built 30 Sep 2014 to 16 Jun 2015

A manufacturing defect of a component within any of the four door locks could result in jamming of the internal mechanism which prevents the closing of any of the vehicle's doors or risk unexpected unlocking and opening of the doors.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the affected door locks.

1,939 vehicles · built 18 Aug 2015 to 20 Nov 2015

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate

Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector.

9,483 vehicles · built 1 Sep 2012 to 2 Jan 2014

Due to none conformity during manufacture the resistance of the insulated base inside the Engine Control Unit (ECU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.

Fix: Recall the vehicles that are likely to be affected and replace the engine ECU.

20 vehicles · built 6 Aug 2011 to 28 Mar 2012

An electronic component within the Built-in Systems Interface (BSI) may not be to the correct specification. This could cause the audio-navigation system the wipers and exterior lighting to malfunction and the warning light on the instrument panel may illuminate.

Fix: Recall the vehicles that are likely to be affected and check the production date of the BSI unit. Where the production date of the BSI unit is in the affected range the unit will be replaced.

733 vehicles · built 4 Jul 2007 to 2 Jul 2010

The fixing bolts of the front suspension wishbones may not be to the correct specification. This could lead to the bolts failing and the security of the wishbones being compromised. If this occurs there is a possibility that the directional control of the vehicle could be adversely affected.

Fix: Recall the vehicle that are likely to be affected and replace all the fixing bolts of the front suspension wishbones.

23,035 vehicles · built 26 Mar 2013 to 20 Nov 2014

It is possible that the front subframe and suspension wishbones mounting bolts may not have been torqued to the correct specification. This could result in the mounting bolt working loose and falling from the vehicle plus the possibility of the insecurity of the subframe or the front suspension wishbone. This can cause an issue with the handling or even loss of control of the vehicle.

Fix: Recall all affected vehicles to check and retorque the front subframe and suspension wishbone mounting bolts.

24 vehicles · built 3 Dec 2014 to 3 Dec 2014

It is possible that the front subframe and suspension wishbones mounting bolts may not have been torqued to the correct specification. This could result in the mounting bolt working loose and falling from the vehicle plus the possibility of the insecurity of the subframe or the front suspension wishbone. This can cause an issue with the handling or even loss of control of the vehicle.

Fix: Recall all affected vehicles to check and retorque the front subframe and suspension wishbone mounting bolts.

24 vehicles · built 3 Dec 2014 to 3 Dec 2014

An internal component of the injector may not be to specification which could reduce the fuel pressure in the injection system. The concern can prevent the engine starting and/or cause the engine to stall.

Fix: Recall the vehicles that are likely to be affected and check the identification number of the engine injectors. Where necessary replace the injectors.

1,145 vehicles · built 11 Sep 2014 to 13 Nov 2014

Affected vehicles may have a small defect in the front bumper frame. This may affect its impact absorption in the even of a collision.

Fix: If required replace front bumper frame.

3 vehicles · built 13 Nov 2014 to 14 Nov 2014

The front shock absorber rod may have an internal fault which could cause it to brake. This could have an adverse affect on the front suspension and the driver's ability to control the vehicle.

Fix: On affected vehicles replace both front shock absorbers.

1,518 vehicles · built 20 Jun 2013 to 27 Aug 2013

It has been identified that the reverse gear locking collar on the gear lever may not have been manufacturered to specification. This could result the incorret selection of gears.

Fix: Recall all affected vehicles to replace the locking collar.

52 vehicles · built 11 Apr 2013 to 13 Nov 2013

On affected vehicles; Under certain conditions the fuel leak off pipe may become insecure at the connection to the injector. If this happens fuel may leak form the connection. Fuel may accumulate in the engine compartment and vehicle users will be aware of a smell of fuel.

Fix: Inspect connection on affected vehicles and where necessary replace the fuel leak off return pipe fixing with new adhesive.

4,775 vehicles · built 3 Oct 2011 to 9 Apr 2014

The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.

35 vehicles · built 15 Nov 2010 to 28 Feb 2011

The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.

63 vehicles · built 1 Mar 2011 to 3 Jun 2011

Brake light switch contacts may become contaminated and the switch may not operate the brake lights when the brake pedal is depressed.

Fix: Replace brake light switch and clean switch harness on affected vehicles .

2,474 vehicles · built 21 Apr 2007 to 26 May 2009

Brake light switch contacts may become contaminated and the switch may not operate the brake lights when the brake pedal is depressed. Ancillary drive belt may fail affecting steering assistance battery charging and air conditioning operation.

Fix: On affected vehicles; replace brake light switch and clean switch harness; Replace drive belt and if necessary belt tensioner rollers

8 vehicles · built 13 Mar 2008 to 31 May 2008

Due to the type of material used for the engine drive belt the nylon idler pulley(s) may wear at an angle. With continued use under this condition the drive belt will be forced off the pulleys. This can lead to battery depletion Overheating and on vehicles with hydraulic power steering the steering effort will increase.

Fix: Replace engine drive belt. Check and if necessary replace idler pulley(s).

2 vehicles · built 22 Jul 2009 to 11 Sep 2009

The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.

Fix: Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.

122 vehicles · built 3 Aug 2011 to 24 Dec 2013

Front subframes on affected vehicles may show signs of damage to the left hand mounting point caused during the manufacturing process. Over time this may affect durability and cause the mounting to fail. This can affect security of components attached to the subframe and may affect control of the vehicle.

Fix: Prior to failure the driver should notice excessive noise from this area. As a safety measure affected vehicles should be checked and where necessary the subframe replaced.

28 vehicles · built 4 Jun 2014 to 16 Jun 2014

Front subframes on affected vehicles may show signs of damage to the left hand mounting point caused during the manufacturing process. Over time this may affect durability and cause the mounting to fail. This can affect security of components attached to the subframe and may affect control of the vehicle.

Fix: Prior to failure the driver should notice excessive noise from this area. As a safety measure affected vehicles should be checked and where necessary the subframe replaced.

28 vehicles · built 4 Jun 2014 to 16 Jun 2014

The front suspension wishbone mounting bolts might not have been manufactured to the correct specification potentially causing a risk of these parts breaking. Broken mounting bolts can be noticed by the driver through noises and poor directional control.

Fix: Recall the vehicles that are likely to be affected to replace the front suspension wishbone mounting bolts.

3,092 vehicles · built 10 Oct 2013 to 19 Nov 2013

The front suspension wishbone mounting bolts might not have been manufactured to the correct specification potentially causing a risk of these parts breaking. Broken mounting bolts can be noticed by the driver through noises and poor directional control.

Fix: Recall the vehicles that are likely to be affected to replace the front suspension wishbone mounting bolts.

3,092 vehicles · built 10 Oct 2013 to 19 Nov 2013

The weld securing the tailgate struts may not be strong enough to support the tailgate in the long term and may detach. If this happens the tailgate may not remain in the open position.

Fix: In the event of the weld not meeting conformity the tailgate must be replaced.

209 vehicles · built 28 Nov 2013 to 10 Dec 2013

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

279 vehicles · built 7 Jan 2014 to 15 Jul 2014

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

279 vehicles · built 7 Jan 2014 to 15 Jan 2014

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

279 vehicles · built 7 Jan 2014 to 15 Jan 2014

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

279 vehicles · built 7 Jan 2014 to 15 Jan 2014

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

279 vehicles · built 7 Jan 2014 to 15 Jan 2014

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

279 vehicles · built 7 Jan 2014 to 15 Jan 2014

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

Fix: Contact keepers using DVLA and manufacturer's records. Check the compliance of the weld on the O/S/R and if necessary replace the cross member.

358 vehicles · built 25 Jul 2013 to 31 Jul 2013

It has been establish that a build up of deposits within the engine can result in engine running and starting issues. In extreme circumstances it can cause a sudden engine stall without any warning.

Fix: Recall all affected vehicle and install a new software package in the engine management system.

2 vehicles · built 30 Nov 2011 to 30 Nov 2011

An internal fault with the wiper motor could cause it to stop working. In some rare cases the windscreen wipers may stop working while in operation.

Fix: Recall affected vehicles and check the manufacturing date of the wiper motor and add a supplementary earth wiring harness if necessary.

620 vehicles · built 1 Jul 2013 to 20 Sep 2013

On certain vehicles the front brake discs may not be the required thickness for the vehicle definition. This concern may result in reduced braking efficiency.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the front brake discs.

49 vehicles · built 29 Aug 2013 to 12 Sep 2013

Over time partial wear of the gearbox control harnesses may occur due to contact with surrounding components. Gear selection may be affected as a result of electrical faults in some rare cases including the lighting of the warning lamp on the instrument panel and the driveability of the vehicle may be compromised.

Fix: Recall the vehicles that are likely to be affected to check the condition of the gearbox control harness and where necessary fit additional protection.

809 vehicles · built 26 Apr 2008 to 19 Aug 2010

It is possible that a leak can occur between the injector spill rail connection and the plastic fuel return pipe. This can cause leakage of fuel which can either pool on the engine cylinder head and then become deposited onto the road surface where it could cause a skid risk to other motorist or if the fuel comes into contact with extremely hot engine components an exhaust manifold for instance it is possible that an under bonnet fire could ensue.

Fix: Recall the vehicles that are likely to be affected to check the sealing of the fuel return pipe connection on each injector and if necessary replace the injectors as well as the fuel return pipes.

30 vehicles · built 13 Jun 2012 to 22 May 2013

The steering column to steering wheel shaft may not have been assembled correctly. If not corrected noise and play will become apparent and if these warnings are not acted on eventually steering control could be lost.

Fix: Recall the vehicles that are likely to be affected to check and where necessary refit the steering column correctly to the steering wheel shaft.

37 vehicles · built 15 Jun 2011 to 14 Nov 2011

The steering column to steering wheel shaft may not have been assembled correctly. If not corrected noise and play will become apparent and if these warnings are not acted on eventually steering control could be lost.

Fix: Recall the vehicles that are likely to be affected to check and where necessary refit the steering column correctly to the steering wheel shaft.

37 vehicles · built 15 Jun 2011 to 14 Nov 2011

It has been identified that it is possible that the rear screen seal may not be to specification. This could lead to water ingress into the boot area which in extreme cases could cause the rear screen to become insecure in its housing.

Fix: Recall all affected vehicles and replace the rear screen seal.

19 vehicles · built 25 Mar 2013 to 26 Mar 2013

It has been identified that it is possible that the rear screen seal may not be to specification. This could lead to water ingress into the boot area which in extreme cases could cause the rear screen to become insecure in its housing.

Fix: Recall all affected vehicles and replace the rear screen seal.

19 vehicles · built 25 Mar 2013 to 26 Mar 2013

On the affected vehicles an internal component of the braking assistance system vacuum pump may not conform. This could over time lead to a reduction in braking assistance.

Fix: Recall the vehicles that are likely to be affected to replace the vacuum pump.

120 vehicles · built 3 Aug 2011 to 26 Apr 2012

On a very limited number of vehicles it is necessary to check the presence of specific spot welds on the vehicle body shell. Should it be identified that one of the welds has been missed in production the vehicle cannot be repaired. In the long term and in very rare cases body noises and squeaking could appear.

Fix: In the rare case that the vehicle does not comply the vehicle will be removed from the road and the customer will be provided with a replacement vehicle.

4 vehicles · built 6 Nov 2012 to 14 Nov 2012

The rear brake caliper mounting bolts may not be to the required torque. Therefore the bolts may slacken and cause noise.

Fix: Recall the vehicles are likely to be affected to replace the rear caliper mounting bolts and ensure they are correctly torqued.

3 vehicles · built 3 Oct 2012 to 3 Oct 2012

One of the vacuum hose unions in the braking system may not be to specification. This could cause a reduction in braking assistance.

Fix: Check and if necessary replace the hose.

618 vehicles · built 26 Jun 2012 to 3 Aug 2012

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

Fix: Recall affected vehicles and replace con-rod shell bearings.

1,169 vehicles · built 26 May 2010 to 26 Aug 2010

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

Fix: Recall affected vehicles and replace con-rod shell bearings.

1,169 vehicles · built 26 May 2010 to 26 Aug 2010

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

Fix: Recall affected vehicles and replace con-rod shell bearings.

1,169 vehicles · built 26 May 2010 to 26 Aug 2010

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

Fix: Recall affected vehicles and replace con-rod shell bearings.

1,169 vehicles · built 26 May 2010 to 26 Aug 2010

The torque settings of the fixings of the front suspension fuel tank fuel cooler and the rear wheels have been set incorrectly. Consequences of the incorrect torque settings include abnormal noise and poor operation of the vehicle.

Fix: Retighten to the correct torque value the front suspension fixings fuel tank fixings fuel cooler fixing and rear wheel bolts.

8 vehicles · built 26 Jul 2012 to 26 Jul 2012

The torque settings of the fixings of the front suspension fuel tank fuel cooler and the rear wheels have been set incorrectly. Consequences of the incorrect torque settings include abnormal noise and poor operation of the vehicle.

Fix: Retighten to the correct torque value the front suspension fixings fuel tank fixings fuel cooler fixing and rear wheel bolts.

8 vehicles · built 26 Jul 2012 to 26 Jul 2012

The nearside front brake hose may not be properly secured and could chafe. If not noticed the chafing could cause loss of brake fluid and the warning lamp to illuminate. Additionally it is possible the braking efficiency could be adversely affected.

Fix: Recall the vehicles that are likely to be affected to check and where necessary correctly secure the nearside front brake hose or replace the hose.

49 vehicles · built 12 Jul 2012 to 12 Jul 2012

It is possible that the left hand wheel bolts may not have been torqued to the correct specification. This could lead to noise or vibration from the wheels and if not rectified it could result in wheel detachment and loss of control of the vehicle.

Fix: Recall affected vehicles to check and if necessary re-torque the wheel bolts.

129 vehicles · built 9 Jul 2012 to 28 Aug 2012

It is possible that the left hand wheel bolts may not have been torqued to the correct specification. This could lead to noise or vibration from the wheels and if not rectified it could result in wheel detachment and loss of control of the vehicle.

Fix: Recall affected vehicles to check and if necessary re-torque the wheel bolts.

129 vehicles · built 9 Jul 2012 to 28 Aug 2012

Over a period of time a small crack can appear on the rear axle cross member particularly under conditions of repeated maximum suspension travel. The small crack could increase in size and eventually lead to the rear wheel rubbing on the wheel arch.

Fix: Replace the rear axle cross member and suspension bump stops.

4,350 vehicles · built 18 Dec 2008 to 4 Oct 2010

The starter motor wiring harness may be subject to long term wear due to rubbing. This can cause electrical problems or in the worst case a fire.

Fix: Recall the vehicles that are likely to be affected to add further protection to the starter motor wiring harness.

9,848 vehicles · built 6 Jul 2006 to 1 Oct 2010

The fixture of the handbrake cable stop support may not have been produced to the correct specification. If not rectified this could cause a reduction in hand brake efficiency.

Fix: Recall all affected vehicles and install strengthening for the handbrake cable stop support under the vehicle.

7 vehicles · built 30 May 2012 to 31 May 2012

The battery earth cable dimensions are incorrect and may cause the cable to break. This will then cause the engine to cut out.

Fix: Replace the battery negative cable with a new dimension cable. (length and terminal)

123 vehicles · built 21 Oct 2010 to 19 May 2011

The battery earth cable dimensions are incorrect and may cause the cable to break. This will then cause the engine to cut out.

Fix: Replace the battery negative cable with a new dimension cable. (length and terminal)

123 vehicles · built 21 Oct 2010 to 19 May 2011

The battery earth cable dimensions are incorrect and may cause the cable to break. This will then cause the engine to cut out.

Fix: Replace the battery negative cable with a new dimension cable. (length and terminal)

123 vehicles · built 21 Oct 2010 to 19 May 2011

The ABS block may not conform to manufacturer specification. This could affect the operation of the ABS/ESP systems on the rare occasions that they are activated.

Fix: The hydraulic ABS/ESP block will be checked and if necessary replaced.

963 vehicles · built 7 Jun 2011 to 27 Jan 2012

The ABS block may not conform to manufacturer specification. This could affect the operation of the ABS/ESP systems on the rare occasions that they are activated.

Fix: The hydraulic ABS/ESP block will be checked and if necessary replaced.

963 vehicles · built 7 Jun 2011 to 27 Jan 2012

The ABS block may not conform to manufacturer specification. This could affect the operation of the ABS/ESP systems on the rare occasions that they are activated.

Fix: The hydraulic ABS/ESP block will be checked and if necessary replaced.

963 vehicles · built 7 Jun 2011 to 27 Jan 2012

The front suspension lower arms may not be fully secure as the mounting bolts may not have been tightened correctly. The driver will initially be alerted to there being a concern because of the abnormal noise that will develop. If the noise is ignored over a long period it is possible the suspension lower arms may detach.

Fix: Recall the vehicles that are likely to be affected to replace the suspension bolts and tighten them to the correct torque.

6 vehicles · built 6 Feb 2012 to 8 Feb 2012

The front suspension lower arms may not be fully secure as the mounting bolts may not have been tightened correctly. The driver will initially be alerted to there being a concern because of the abnormal noise that will develop. If the noise is ignored over a long period it is possible the suspension lower arms may detach.

Fix: Recall the vehicles that are likely to be affected to replace the suspension bolts and tighten them to the correct torque.

6 vehicles · built 6 Feb 2012 to 8 Feb 2012

The engine may cut out as a dimensional nonconformity of the earth cable could lead to it breaking.

Fix: Recall the vehicles that are likely to be affected to replace the battery earth cable.

981 vehicles · built 8 Nov 2010 to 29 Apr 2011

The engine may cut out as a dimensional nonconformity of the earth cable could lead to it breaking.

Fix: Recall the vehicles that are likely to be affected to replace the battery earth cable.

981 vehicles · built 8 Nov 2010 to 29 Apr 2011

The supply terminal to the engine relay unit may have been over tightened and over time this could damage the component and cause the engine to cut out. In addition this could cause the diagnostic warning lamp to illuminate in error and it may make it more difficult to start the engine.

Fix: Recall the vehicles that are likely to be affected to check and if necessary replace the engine relay unit.

78 vehicles · built 13 Oct 2011 to 15 Nov 2011

The supply terminal to the engine relay unit may have been over tightened and over time this could damage the component and cause the engine to cut out. In addition this could cause the diagnostic warning lamp to illuminate in error and it may make it more difficult to start the engine.

Fix: Recall the vehicles that are likely to be affected to check and if necessary replace the engine relay unit.

78 vehicles · built 13 Oct 2011 to 15 Nov 2011

Some tyres may have suffered superficial damage when the vehicle was being transported. The front Left hand tyre may have localised damage on the tread or the inner side. The tyre may rip and deflate.

Fix: Carry out a visual check of the condition of the tyre in the affected areas and replace the tyre if necessary.

17 vehicles · built 19 Jan 2012 to 20 Jan 2012

Some tyres may have suffered superficial damage when the vehicle was being transported. The front Left hand tyre may have localised damage on the tread or the inner side. The tyre may rip and deflate.

Fix: Carry out a visual check of the condition of the tyre in the affected areas and replace the tyre if necessary.

17 vehicles · built 19 Jan 2012 to 20 Jan 2012

There is a possibility that a component internal to the steering mechanism may not be manufactured to the correct specification which over time can cause the steering to become either stiff or easier to operate.

Fix: Recall the vehicles that are likely to be affected to replace the steering mechanism.

2 vehicles · built 4 Feb 2010 to 5 Feb 2010

The fixing bolts of the front LH and RH seat belt return rail may loosen and in cases of extreme force break.

Fix: The bolts on the left and right- hand sides will be replaced.

88 vehicles · built 22 Nov 2011 to 22 Nov 2011

The fixing bolts of the front LH and RH seat belt return rail may loosen and in cases of extreme force break.

Fix: The bolts on the left and right- hand sides will be replaced.

88 vehicles · built 22 Nov 2011 to 22 Nov 2011

The fixing bolts of the front LH and RH seat belt return rail may loosen and in cases of extreme force break.

Fix: The bolts on the left and right- hand sides will be replaced.

88 vehicles · built 22 Nov 2011 to 22 Nov 2011

The fixing bolts of the front LH and RH seat belt return rail may loosen and in cases of extreme force break.

Fix: The bolts on the left and right- hand sides will be replaced.

88 vehicles · built 22 Nov 2011 to 22 Nov 2011

The battery earth return cable is not to the correct specification which during vehicle operation may cause it to fail. This could result in the engine cutting out.

Fix: Recall all affected vehicle and replace the battery earth return cable.

2,712 vehicles · built 29 Oct 2010 to 22 Feb 2011

The stroke of the brake pedal which could affect the slowing down of the vehicle may be in excess of manufacturer's recommendations due to the brake bleeding operation not being fully performed.

Fix: Recall the vehicles that are likely to be affected to ensure the brakes have been fully bled and that brake travel is within manufacturer's recommendation.

15 vehicles · built 27 Oct 2011 to 27 Oct 2011

The stroke of the brake pedal which could affect the slowing down of the vehicle may be in excess of manufacturer's recommendations due to the brake bleeding operation not being fully performed.

Fix: Recall the vehicles that are likely to be affected to ensure the brakes have been fully bled and that brake travel is within manufacturer's recommendation.

15 vehicles · built 27 Oct 2011 to 27 Oct 2011

The battery earth return cable is not to the correct specification which during vehicle operation may cause it to fail. This could result in the engine cutting out.

Fix: Recall all affected vehicle and replace the battery earth return cable.

1,276 vehicles · built 2 Nov 2010 to 9 Nov 2010

The battery earth return cable is not to the correct specification which during vehicle operation may cause it to fail. This could result in the engine cutting out.

Fix: Recall all affected vehicle and replace the battery earth return cable.

1,276 vehicles · built 2 Nov 2010 to 9 Nov 2010

The front suspension lower swivel joint may not be tightened correctly. If the bolt slackens the joint may separate. This could adversely affect the directional control of the vehicle.

Fix: Recall the vehicles that are likely to be affected to check and where necessary correct the tightening torque of the lower swivel joint clamp bolt.

7 vehicles · built 22 Jun 2011 to 13 Sep 2011

The front suspension lower swivel joint may not be tightened correctly. If the bolt slackens the joint may separate. This could adversely affect the directional control of the vehicle.

Fix: Recall the vehicles that are likely to be affected to check and where necessary correct the tightening torque of the lower swivel joint clamp bolt.

7 vehicles · built 22 Jun 2011 to 13 Sep 2011

The nuts that secure the pedal mounting assembly may be the wrong specification. This could allow the nuts to work loose. If this happens control of the vehicle could be effected.

Fix: Recall all affected vehicles and replace the nuts.

2 vehicles · built 1 Oct 2011 to 1 Oct 2011

The nuts that secure the pedal mounting assembly may be the wrong specification. This could allow the nuts to work loose. If this happens control of the vehicle could be effected.

Fix: Recall all affected vehicles and replace the nuts.

2 vehicles · built 3 Oct 2011 to 3 Oct 2011

The earth cable for the battery may be too short and could break. If this happens the vehicle electrical circuit will fail. This could cause the engine to cut out.

Fix: Recall all affected vehicles and replace the battery earth cable.

589 vehicles · built 7 Apr 2010 to 21 May 2010

The earth cable for the battery may be too short and could break. If this happens the vehicle electrical circuit will fail. This could cause the engine to cut out.

Fix: Recall all affected vehicles and replace the battery earth cable.

589 vehicles · built 7 Apr 2010 to 21 May 2010

On affected vehicles the drivers airbag nay not be of conformity. This non-conformity could lead to poor deployment of the airbag in the event of a collision.

Fix: Replace drivers airbag

25 vehicles · built 19 Jul 2011 to 19 Jul 2011

On affected vehicles the drivers airbag nay not be of conformity. This non-conformity could lead to poor deployment of the airbag in the event of a collision.

Fix: Replace drivers airbag

25 vehicles · built 19 Jul 2011 to 19 Jul 2011

The battery earth return cable maybe too short which during vehicle operation may cause it to fail at its gearbox mounting point. This could result in the engine cutting out.

Fix: Recall all affected vehicle and replace the battery earth return cable.

9,175 vehicles · built 7 Jan 2011 to 23 May 2011

The battery earth return cable maybe too short which during vehicle operation may cause it to fail at its gearbox mounting point. This could result in the engine cutting out.

Fix: Recall all affected vehicle and replace the battery earth return cable.

9,175 vehicles · built 7 Jan 2011 to 23 May 2011

The battery earth return cable maybe too short which during vehicle operation may cause it to fail at its gearbox mounting point. This could result in the engine cutting out.

Fix: Recall all affected vehicle and replace the battery earth return cable.

9,175 vehicles · built 7 Jan 2011 to 23 May 2011

It has been identified that the engine cylinder head may not comply with manufacturing specification this may lead to an oil leak which if not rectified could result in fire if the oil contacts hot engine components.

Fix: Recall the affected vehicle check the cylinder head and replace if required.

2 vehicles · built 5 May 2011 to 5 May 2011

The tailgate may fall from the open position because of a potentially faulty ball joint to strut link.

Fix: Recall the vehicles that are likely to be affected to check and if necessary replace the tailgate struts.

34 vehicles · built 12 Apr 2011 to 14 Apr 2011

The fixing bracket of the air unit on the engine may break under the effect of vibration. This could affect some of the surrounding components.

Fix: Remove the bracket and replace with washers

1,057 vehicles · built 6 Jan 2010 to 3 Jul 2010

The spare wheel winch may fail and not secure the spare wheel to the vehicle so allowing it to detach from the vehicle.

Fix: Recall all affected vehicles and replace the spare wheel winch.

13,095 vehicles · built 18 Jul 2006 to 1 Apr 2009

The spare wheel winch may fail and not secure the spare wheel to the vehicle so allowing it to detach from the vehicle.

Fix: Recall all affected vehicles and replace the spare wheel winch.

13,095 vehicles · built 18 Jul 2006 to 21 Apr 2010

A component within the parking brake assembly may not meet conformity this could result in a lengthening of the handbrake travel which could have an affect on the parking brake efficiency.

Fix: Recall the affected vehicles and replace the non-conformity components.

3,773 vehicles · built 11 Jan 2010 to 1 Jul 2010

It is possible that the wiring harness for the power assisted steering motor may come in contact with other components in the engine bay. Should this occur then it is possible that the power steering assistance on this large vehicle may become affected.

Fix: Recall affected vehicles and fit protection to the wiring harness.

1,357 vehicles · built 1 Feb 2010 to 7 Feb 2011

It is possible that the wiring harness for the power assisted steering motor may come in contact with other components in the engine bay. Should this occur then it is possible that the power steering assistance on this large vehicle may become affected.

Fix: Recall affected vehicles and fit protection to the wiring harness.

1,357 vehicles · built 1 Feb 2010 to 7 Feb 2011

It is possible for the engine to stall due to incorrect reading of oil levels during harsh and prolonged braking.

Fix: Recall the vehicles that are likely to be affected to download new software to the engine ECU.

157 vehicles · built 22 Apr 2009 to 5 Apr 2011

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

Fix: Recall the vehicles that are likely to be affected to replace the left hand side front chassis member.

6 vehicles · built 15 Feb 2011 to 15 Feb 2011

The brakes could be inadvertently applied by the passenger.

Fix: Recall the vehicles that are likely to be affected to fit a cover over the cross shaft lobe on the passenger side.

24,213 vehicles · built 29 Jul 2008 to 31 May 2011

On the affected vehicles an internal component of the braking assistance circuit amplifier may not be in conformity. This could result in reduction of braking over time.

Fix: Replacement of the amplifier (Servo).

22 vehicles · built 5 Jan 2011 to 2 Feb 2011

It has been identified that due to a nonconformity in one of the operating cables of the Electric Parking Brake (FSE) it is possible that insufficient application (force) will be applied. This could result in only one wheel operating or locked. The driver however will receive warning of the issue by the illumination of the Parking Brake Warning Lamp on the instrument panel along with a message on the multifuction screen.

Fix: Recall all affected vehicles for inspection repair or if required the replacement of the cable.

8,230 vehicles · built 6 Jul 2006 to 11 May 2007

The wiring loom to the tailgate may have been routed incorrectly. This could cause damage to the wiring and amongst other things the boot to open inadvertently.

Fix: Recall the vehicles that are likely to be affected to check and if necessary replace the tailgate wiring harness.

10,844 vehicles · built 29 May 2004 to 21 Jul 2006

On affected vehicles an internal nonconformity in the drivers side windscreen wiper motor may lead over time to the failure of the windscreen wiper mechanism.

Fix: Replacement of drivers side windscreen wiper motor.

4,271 vehicles · built 10 Mar 2009 to 19 Jun 2009

Gear selection may be affected by inaccurate software being installed.

Fix: The recalled vehicles will be subject to a software upgrade.

5 vehicles · built 14 Sep 2010 to 14 Sep 2010

It is possible that the fuel return pipe may chaff on the diesel fuel filter support in the engine compartment. This can if not identified result in a fuel leak.

Fix: Recall all affected vehicles for the addition of a protective sleeve to the return pipe.

33 vehicles · built 8 Jul 2010 to 13 Oct 2010

It is possible that the fuel return pipe may chaff on the diesel fuel filter support in the engine compartment. This can if not identified result in a fuel leak.

Fix: Recall all affected vehicles for the addition of a protective sleeve to the return pipe.

33 vehicles · built 8 Jul 2010 to 13 Oct 2010

It is possible that the fuel return pipe may chaff on the diesel fuel filter support in the engine compartment. This can if not identified result in a fuel leak.

Fix: Recall all affected vehicles for the addition of a protective sleeve to the return pipe.

33 vehicles · built 8 Jul 2010 to 13 Oct 2010

It is possible that the fuel return pipe may chaff on the diesel fuel filter support in the engine compartment. This can if not identified result in a fuel leak.

Fix: Recall all affected vehicles for the addition of a protective sleeve to the return pipe.

33 vehicles · built 8 Jul 2010 to 13 Oct 2010

On affected vehicles connectors intended to supply the electric front seats fitted to some versions are not used and are located under the rear footwell carpets. If these connectors come into contact with water of melted snow and de-icing agents they may corrode over a period of time and cause localised electrical overheating.

Fix: The operation involves repositioning these electrical supply wires for the two front seats to move them higher up on the seat frame.

45 vehicles · built 8 Jun 2007 to 25 Jan 2008

Possible nonconformity of the welding between the cross rail under the floor and its end piece. This possible nonconformity may mean that the rear seats are not held correctly in place in the event of a serious impact.

Fix: Checking of the assembly and repair if necessary.

38 vehicles · built 20 Jul 2010 to 21 Jul 2010

In very rare circumstances the vacuum pump one way valve may not function correctly which could affect the level of braking assistance.

Fix: Recall the vehicles that are likely to be affected to replace the brake vacuum pump one way valve.

20,089 vehicles · built 21 Dec 2006 to 27 Mar 2009

In very rare circumstances the vacuum pump one way valve may not function correctly which could affect the level of braking assistance.

Fix: Recall the vehicles that are likely to be affected to replace the brake vacuum pump one way valve.

20,089 vehicles · built 21 Dec 2006 to 27 Mar 2009

In very rare circumstances the vacuum pump one way valve may not function correctly which could affect the level of braking assistance.

Fix: Recall the vehicles that are likely to be affected to replace the brake vacuum pump one way valve.

20,089 vehicles · built 21 Dec 2006 to 27 Mar 2009

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

Fix: Recall all affected vehicles and replace the engine.

72 vehicles · built 10 May 2010 to 17 Oct 2010

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

Fix: Recall all affected vehicles and replace the engine.

72 vehicles · built 10 May 2010 to 17 Oct 2010

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

Fix: Recall all affected vehicles and replace the engine.

72 vehicles · built 10 May 2010 to 17 Oct 2010

It has been identified that due to the Non-Conformity of the handbrake adjustment system in the handbrake mechanism it is possible that there can be a reduction in the efficiency of the parking brake.

Fix: Recall all affected vehicles for the replacement of the handbrake lever mechanism.

957 vehicles · built 18 Dec 2009 to 17 Mar 2010

The roof panel rear flap hinge may have a defect which will eventually allow the roof panel to detach.

Fix: Recall the vehicles that are likely to be affected to either reinforce the retention of the hinges or changing the roof panel rear flap.

16 vehicles · built 4 Sep 2008 to 10 Dec 2009

It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning.

Fix: Recalled vehicles will have the lighting management software updated.

12,950 vehicles · built 4 Jul 2007 to 27 Mar 2008

It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning.

Fix: Recalled vehicles will have the lighting management software updated.

12,950 vehicles · built 4 Jul 2007 to 27 Mar 2008

It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning.

Fix: Recalled vehicles will have the lighting management software updated.

12,950 vehicles · built 4 Jul 2007 to 27 Mar 2008

It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning.

Fix: Recalled vehicles will have the lighting management software updated.

12,950 vehicles · built 4 Jul 2007 to 27 Mar 2008

It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning.

Fix: Recalled vehicles will have the lighting management software updated.

12,950 vehicles · built 4 Jul 2007 to 27 Mar 2008

The fuel tank mounting bolts may have been incorrectly torqued this may cause the mountings to become loose which can lead to stress on the fuel pipes and subsequently a fuel leak.

Fix: Recall the affected vehicles to check and if necessary retorque of the mounting bolts.

44 vehicles · built 4 Jan 2010 to 16 Jun 2010

The fuel tank mounting bolts may have been incorrectly torqued this may cause the mountings to become loose which can lead to stress on the fuel pipes and subsequently a fuel leak.

Fix: Recall the affected vehicles to check and if necessary retorque of the mounting bolts.

44 vehicles

The bonnet lock fixing bolts may not be fully secure which can result in noise and vibration and in rare cases insecure holding by the bonnet catch and lock.

Fix: On recalled vehicles the tightness of the bonnet lock fixing bolts will be checked and where necessary tightened to specification.

67 vehicles · built 23 Dec 2009 to 23 Jun 2010

The bonnet lock fixing bolts may not be fully secure which can result in noise and vibration and in rare cases insecure holding by the bonnet catch and lock.

Fix: On recalled vehicles the tightness of the bonnet lock fixing bolts will be checked and where necessary tightened to specification.

67 vehicles · built 23 Dec 2009 to 23 Jun 2010

The bolts securing the engine cradle to the chassis may not be fully secure. There is a possibility that the bolts may loosen which will result in noise vibration and in rare cases an alteration in vehicle handling.

Fix: Recall the vehicles that are likely to be affected to replace all the securing bolts and tighten them to the correct specification.

16 vehicles · built 4 Feb 2010 to 11 Feb 2010

The passenger airbag wiring harness connector may not be to specification which can cause the illumination of the warning light on the dashboard or if involved in a impact the incorrect deployment of the airbag.

Fix: Recall all affected vehicles and replace the passenger airbag wiring harness.

336 vehicles · built 3 Feb 2010 to 11 Mar 2010

The security of the windscreen trim may deteriorate over a period of time. This could ultimately result in detachment of the trim.

Fix: Recall affected vehicles check security of trim and if required replace trim.

13,234 vehicles

The threaded portion of the brake linkage rod in the brake control system may not be to conformity. This could result in a reduction of braking efficiency.

Fix: Recall affected vehicles to check rod and replace if found not to meet conformity.

630 vehicles · built 24 Feb 2010 to 27 May 2010

The threaded portion of the brake linkage rod in the brake control system may not be to conformity. This could result in a reduction of braking efficiency.

Fix: Recall affected vehicles to check rod and replace if found not to meet conformity.

630 vehicles · built 24 Feb 2010 to 27 May 2010

It has been established that on some C3's the rigid section of the front brake hose may be deformed or twisted. This could result in a deterioration of the braking efficiency.

Fix: Recall the affected vehicles and inspect the brake hose for distortion and replace if required.

7,760 vehicles · built 11 Sep 2008 to 15 Jan 2010

The front axle fixings may not have been tightened sufficiently. This may result in the front axle becoming insecure which may in rare cases if not corrected cause directional control to become impaired.

Fix: Recall the vehicles that are likely to be affected to check the front axle fixings and where necessary tighten them to specification.

36 vehicles · built 5 Jan 2010 to 2 Jun 2010

The front axle fixings may not have been tightened sufficiently. This may result in the front axle becoming insecure which may in rare cases if not corrected cause directional control to become impaired.

Fix: Recall the vehicles that are likely to be affected to check the front axle fixings and where necessary tighten them to specification.

36 vehicles · built 5 Jan 2010 to 2 Jun 2010

The fuel supply lines may not be correctly routed under the vehicle and may contact the heat shield. Should this occur it can result in chaffing of the fuel pipe which can cause a leak.

Fix: Recall the affected vehicles and fit additional securing fixings.

611 vehicles · built 21 Jan 2010 to 2 Mar 2010

The front seat belts may not lock in the buckles correctly which will have the affect of the front passengers not being sufficiently restrained in the case of a violent impact.

Fix: Recall the vehicles that are likely to be affected to check and where necessary repair the seat belt locking mechanism.

134 vehicles · built 2 Dec 2009 to 3 Dec 2009

The front right hand drive-shaft may fail.

Fix: Recall the affected vehicles to check and if necessary replace the right hand drive-shaft

114 vehicles

The front right hand drive-shaft may fail.

Fix: Recall the affected vehicles to check and if necessary replace the right hand drive-shaft

114 vehicles

It has been identified that water may ingress the brake drums causing premature brake lining wear. Should this occur the brake effort produced by the rear wheels may be reduced.

Fix: Recalled vehicles will have a seal fitted to the handbrake cable and the subject brake linings replaced.

2,258 vehicles

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

Fix: Recalled vehicles will have a reinforcing plate fitted within the accelerator pedal mechanism which will ensure continued correct functionality.

34 vehicles

It has been identified that the possibility exists that contact between the fuel return pipe and the engine shield may take place inside the engine compartment. Should this occur wear on the pipe would ensue which in the worst case; would result in a fuel leak.

Fix: Recalled vehicles will be fitted with an additional fastener to ensure that contact is not made and if necessary the fuel return pipe will be replaced.

1,135 vehicles · built 1 Jan 2007 to 9 Jul 2008

The lighting management system may incorrectly detect the position of the exterior lighting control switch. This may cause the exterior light to switch off without warning.

Fix: Recall all affected vehicles and install a new version of the exterior lighting management software to the vehicle.

592 vehicles · built 1 Jul 2007 to 27 Mar 2008

The ball mountings for the rear screen support struts may dislocate and the screen will not remain in open position

Fix: Recall affected vehicles check security/tightness of strut mounting balls and replace any that are damaged.

1,012 vehicles · built 3 Jun 2009 to 12 Oct 2009

It has been identified that the possibility exists that the mounting ball on both tailgate support struts may rotate when the tailgate is opened or closed. Should one of the support struts dislocate the tailgate may not remain in the open position.

Fix: Recalled vehicles will have the mounting ball joints on the tailgate support struts replaced.

157 vehicles · built 20 Jan 2009 to 18 Aug 2009

It has been identified that one of the windscreen side trims is not compliant. This may lead to the side trim moving position and in rare cases detaching.

Fix: Recalled vehicles will be checked for windscreen trim compliance. Should a non-compliance be identified the side trims will be replaced.

5,142 vehicles · built 1 Jan 2008 to 30 Jun 2009

Residual low pressure persists in the power braking vacuum circuit which may result in the loss of power assistance when braking.

Fix: Recall affected vehicles to fit a calibrated air vent in the vacuum circuit.

676 vehicles · built 6 Oct 2004 to 4 May 2007

It has been identified that due to incorrect positioning of the exterior lighting control ring by the lighting management system the lights may switch off unexpectedly.

Fix: Recalled vehicles will have the lighting management software updated

37,086 vehicles · built 21 Dec 2006 to 27 Mar 2008

It has been identified that due to incorrect positioning of the exterior lighting control ring by the lighting management system the lights may switch off unexpectedly.

Fix: Recalled vehicles will have the lighting management software updated

37,086 vehicles · built 21 Dec 2006 to 27 Mar 2008

It has been identified that due to incorrect positioning of the exterior lighting control ring by the lighting management system the lights may switch off unexpectedly.

Fix: Recalled vehicles will have the lighting management software updated

37,086 vehicles · built 21 Dec 2006 to 27 Mar 2008

It has been identified that due to incorrect positioning of the exterior lighting control ring by the lighting management system the lights may switch off unexpectedly.

Fix: Recalled vehicles will have the lighting management software updated

37,086 vehicles · built 21 Dec 2006 to 27 Mar 2008

An internal component of the Brake Master Cylinder may not be in conformity and as such braking performance/efficiency may be affected

Fix: Recall affected vehicles and replace Master Cylinder

56 vehicles · built 27 Mar 2009 to 14 Apr 2009

The parking brake may fail due to the cable not being manufactured to specification.

Fix: Recall the vehicles that are likely to be affected to replace the parking brakes cables.

754 vehicles · built 20 Jan 2009 to 17 Feb 2009

The parking brake may fail due to the cable not being manufactured to specification.

Fix: Recall the vehicles that are likely to be affected to replace the parking brakes cables.

754 vehicles · built 20 Jan 2009 to 17 Feb 2009

The rear dampers lower fixing bolts may become loose.

Fix: Recall affected vehicles to check conformity of damper lower fixing bolt and replace if necessary

54 vehicles · built 3 Apr 2009 to 15 Apr 2009

The rear dampers lower fixing bolts may become loose.

Fix: Recall affected vehicles to check conformity of damper lower fixing bolt and replace if necessary

54 vehicles · built 3 Apr 2009 to 15 Apr 2009

The rear dampers lower fixing bolts may become loose.

Fix: Recall affected vehicles to check conformity of damper lower fixing bolt and replace if necessary

54 vehicles · built 3 Apr 2009 to 15 Apr 2009

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

Fix: Recall affected vehicles and replace hubs.

169 vehicles · built 1 May 2009 to 31 May 2009

The heat shield protecting the spare wheel and carrier may detach because of the vibrations it is subjected to.

Fix: Recall the vehicles that are likely to be affected to modify the heat shield or where necessary replace the spare wheel carrier which incorporates the heat shield.

4,440 vehicles · built 1 Nov 2007 to 31 Jul 2008

It has been identified that the fixing for the left hand seat belt inertia reel may not have tightened to the specified torque. As a result in the event of an impact the seat belt may not function as designed.

Fix: Recalled vehicles will have the fixing checked to ensure that it is at the correct torque tightening same as necessary.

6 vehicles · built 25 Mar 2009 to 25 Mar 2009

The left hand rear seat may not be fully secure because the right hand seat fixing may have been welded incorrectly. If the weld is incorrect the seat may detach during an accident.

Fix: Recall the vehicles that are likely to be affected to check and where necessary repair the seat fixing.

10 vehicles · built 5 Dec 2008 to 29 Jan 2009

It has been identified that due to incorrect operation of the brake servo valve the effectiveness of the assistance provided could be reduced. It should be noted that the brake function remains in operation.

Fix: Recalled vehicles will have the subject valve replaced.

7 vehicles · built 23 Oct 2007 to 4 Dec 2008

It has been identified that a batch of fuel injector pumps supplied as spare parts may have covers manufactured from a defective material. This could cause the pump covers to develop fissures which over time may lead to fuel leakage.

Fix: Recalled vehicles will have the fuel injector pump replaced.

27 vehicles

It has been identified that on affected vehicles a non conformity within the accelerator pedal assembly may cause interference and prevent the pedal from returning to its original position. This may result in the vehicle maintaining a degree of acceleration which can be overcome by firm braking.

Fix: Recalled vehicles will have the accelerator pedal changed.

178 vehicles · built 13 May 2008 to 25 Mar 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment

Fix: Recall affected vehicles check Engine Relay Unit and replace if not correct specification.

6,031 vehicles · built 1 Feb 2008 to 14 Jun 2008

Welding on front R/H seat frame may not be robust enough by the seat buckle. Restraining ability may be impaired in an impact.

Fix: Recall affected vehicles to check and replace seat frame if in affected batch.

238 vehicles · built 6 Apr 2008 to 9 Apr 2008

It has been identified that due to a production non conformity in one of the electric parking brake cables the brake may not hold the vehicle securely on a steep gradient when the parking brake is applied. This will be accompanied by the illumination of the warning lamp and a message saying parking brake faulty on the multifunction screen.

Fix: Recalled vehicle swill have the conformity of the cables checked and replaced as necessary.

9,398 vehicles · built 6 Jul 2006 to 11 May 2007

The tightening torque for the front suspension wishbone mounting bolts has proved insufficient. This can lead to loosening represented by abnormal noise

Fix: Recall affected vehicles and retorque front suspension wishbone bolts

4,652 vehicles · built 14 Jan 2008 to 18 Mar 2008

The tightening torque for the front suspension wishbone mounting bolts has proved insufficient. This can lead to loosening represented by abnormal noise

Fix: Recall affected vehicles and retorque front suspension wishbone bolts

4,652 vehicles · built 14 Jan 2008 to 18 Mar 2008

The tightening torque for the front suspension wishbone mounting bolts has proved insufficient. This can lead to loosening represented by abnormal noise

Fix: Recall affected vehicles and retorque front suspension wishbone bolts

4,652 vehicles · built 14 Jan 2008 to 18 Mar 2008

Following a manufacturing issue the rear sear cushion fixings may become damaged and the cushion may not stay in place

Fix: Recall affected vehicles and replace rear seat cushion fixings

18 vehicles · built 17 Mar 2008 to 18 Mar 2008

The front brake caliper fixing screws are not to standard (non - conforming) and may slacken

Fix: Recall affected vehicles and replace fixing screws with approved type.

143 vehicles · built 12 Sep 2006 to 30 Oct 2006

It has been identified that in the event of incorrect bonding there is a risk of the partial release of the glass panoramic roof moulding such that it becomes visible to the driver. If the concern is not rectified in the long term; the moulding could detach. It should be noted that there is no risk to the integrity of the sealing of the affected area.

Fix: Recalled vehicles will have the bonding of the moulding checked and replaced as necessary.

367 vehicles · built 28 Feb 2007 to 28 Jun 2007

It has been identified that the diesel fuel return pipe which is fixed to the inlet manifold may be abraded to the extent that if left undetected will leak.

Fix: Recalled vehicles as a preventative measure will have the pipe inspected for damage. If any is found the pipe will be replaced. In cases where the pipe remains undamaged it will be fitted with reinforcement.

1,611 vehicles · built 2 Mar 2006 to 30 Jan 2008

It has been identified that the diesel fuel return pipe which is fixed to the inlet manifold may be abraded to the extent that if left undetected will leak.

Fix: Recalled vehicles as a preventative measure will have the pipe inspected for damage. If any is found the pipe will be replaced. In cases where the pipe remains undamaged it will be fitted with reinforcement.

1,611 vehicles · built 2 Mar 2006 to 30 Jan 2008

It has been identified that the diesel fuel return pipe which is fixed to the inlet manifold may be abraded to the extent that if left undetected will leak.

Fix: Recalled vehicles as a preventative measure will have the pipe inspected for damage. If any is found the pipe will be replaced. In cases where the pipe remains undamaged it will be fitted with reinforcement.

1,611 vehicles · built 2 Mar 2006 to 30 Jan 2008

It has been identified that the diesel fuel return pipe which is fixed to the inlet manifold may be abraded to the extent that if left undetected will leak.

Fix: Recalled vehicles as a preventative measure will have the pipe inspected for damage. If any is found the pipe will be replaced. In cases where the pipe remains undamaged it will be fitted with reinforcement.

1,611 vehicles · built 2 Mar 2006 to 30 Jan 2008

It has been identified that the check valve within the brake assistance vacuum pump may suffer from a non-conformity which in time may reduce the braking assistance.

Fix: Recalled vehicles as a preventative measure will have the subject valve replaced. At the same time certain vehicles will also have the air dosing unit replaced.

307 vehicles · built 16 May 2006 to 22 Dec 2006

It has been identified that the check valve within the brake assistance vacuum pump may suffer from a non-conformity which in time may reduce the braking assistance.

Fix: Recalled vehicles as a preventative measure will have the subject valve replaced. At the same time certain vehicles will also have the air dosing unit replaced.

307 vehicles · built 16 May 2006 to 22 Dec 2006

It has been identified that the check valve within the brake assistance vacuum pump may suffer from a non-conformity which in time may reduce the braking assistance.

Fix: Recalled vehicles as a preventative measure will have the subject valve replaced. At the same time certain vehicles will also have the air dosing unit replaced.

307 vehicles · built 16 May 2006 to 22 Dec 2006

It has been identified that one component of the computer that controls the operation of the wipers lighting and battery charging is not to specification. This can result in erratic operation or failure of one or all of the specified functions.

Fix: Recalled vehicles will have the subject computer replaced.

45 vehicles · built 10 Mar 2008 to 11 Mar 2008

The accelerator pedal plate may have been fitted with nuts that are not of the correct specification. In time the nuts may work loose making the pedal feel insecure.

Fix: Recall the vehicles that are likely to be affected to replace the three accelerator pedal plate fixing nuts.

30 vehicles · built 1 Apr 2008 to 1 Apr 2008

It has been identified that; with the engine switched off the side indicator repeaters do not operate when the parking lights are on.

Fix: Recalled vehicles will have the relevant operating software upgraded.

67 vehicles · built 27 Nov 2007 to 30 Nov 2007

It has been identified that there is a risk of the engine stalling under very firm braking conditions.

Fix: Recalled vehicles will have the engine ECU software upgraded.

1,427 vehicles · built 13 Feb 2007 to 28 Jan 2008

It has been identified that there is a risk of the engine stalling under very firm braking conditions.

Fix: Recalled vehicles will have the engine ECU software upgraded.

1,427 vehicles · built 13 Feb 2007 to 28 Jan 2008

The brake pedal might feel stiff and the braking distances extended as a result of a defect in the vacuum pump.

Fix: Recall the vehicles that are likely to be affected to replace the valve in the vacuum pump.

2,557 vehicles · built 31 Mar 2006 to 3 Jan 2007

The brake pedal might feel stiff and the braking distances extended as a result of a defect in the vacuum pump.

Fix: Recall the vehicles that are likely to be affected to replace the valve in the vacuum pump.

2,557 vehicles · built 31 Mar 2006 to 3 Jan 2007

It has been identified that a problem may arise with the steering mechanism which can result in hardness whilst manoeuvring.

Fix: Recalled vehicles will have the steering mechanism checked and lubricated. The mechanism will be replaced if found to be damaged. At the same time certain vehicles will have key components reinforced against the ingress of water. Thus preventing operating faults in the long term.

2,779 vehicles · built 18 Jul 2006 to 8 Mar 2007

Possible oil seepage in the brake assistance circuit that could damage the brake amplifier membrane and reduce braking assistance.

Fix: Recall the vehicles that are likely to be affected to replace the vacuum circuit valve and pipe which link the vacuum pump to the brake amplifier.

426 vehicles · built 21 Jul 2005 to 1 Dec 2006

Braking maybe impaired due to some brake pipes not being manufactured to conformity.

Fix: Recall the vehicles that are likely to be affected to check the serial numbers of the brake pipes and to replace the brake pipes where necessary.

456 vehicles · built 16 Oct 2007 to 15 Nov 2007

Possible oil seepage in the brake assistance circuit that could damage the brake amplifier membrane and reduce braking assistance.

Fix: Recall the vehicles that are likely to be affected to replace the vacuum circuit valve and pipe which link the vacuum pump to the brake amplifier.

161 vehicles · built 12 Feb 2007 to 7 Mar 2007

It has been identified that vehicles fitted with 2I HDI engines may have been fitted a vacuum pump which may not be to specification. This could lead to a decrease in braking assistance.

Fix: Recalled vehicles will have the vacuum pump replaced.

520 vehicles · built 1 Jul 2005 to 30 Mar 2006

It has been identified that vehicles fitted with 2I HDI engines may have been fitted a vacuum pump which may not be to specification. This could lead to a decrease in braking assistance.

Fix: Recalled vehicles will have the vacuum pump replaced.

520 vehicles · built 6 Jul 2005 to 7 Jul 2005

It has been identified that the operation of the ABS/ESP braking unit may be affected by the ingress of water.

Fix: Recall likely to be affected vehicles to reinforce the resistance of the ABS/ESP unit to water.

28,049 vehicles · built 2 Jun 2005 to 26 Sep 2006

It has been identified that the operation of the ABS/ESP braking unit may be affected by the ingress of water.

Fix: Recall likely to be affected vehicles to reinforce the resistance of the ABS/ESP unit to water.

28,049 vehicles · built 7 Apr 2006 to 26 Sep 2006

It has been identified that the operation of the ABS/ESP braking unit may be affected by the ingress of water.

Fix: Recall likely to be affected vehicles to reinforce the resistance of the ABS/ESP unit to water.

28,049 vehicles · built 25 May 2004 to 4 Apr 2006

It has been identified that poor protection of the power steering pump earth terminal; could result in loss of power assistance to the steering.

Fix: Recalled vehicles will have the power steering pump earth terminal protection reinforced.

689 vehicles · built 26 Jul 2006 to 22 Mar 2007

It has been identified that during the fuel tank production process the joint between the tank and the fuel supply pipe assembly may not have been produced to the correct standard. Should this indeed be the case leakage from the supply pipe area of the fuel tank might occur.

Fix: Recalled vehicles will have the fuel tank inspected and replaced as necessary.

33 vehicles · built 16 May 2007 to 25 May 2007

It has been identified that a brake hose may become worn as a result of rubbing contact against the heat shield protecting the exhaust system. This may lead in extreme cases to a leak from a brake circuit which manifests itself in increased brake pedal travel.

Fix: Recalled vehicles will have the exhaust heat shield adjusted in order to maintain the correct distance from the subject brake hose. Should the hose display signs of wear it will be replaced.

18 vehicles · built 12 Dec 2006 to 20 Apr 2007

It has been identified that on some vehicles fitted with electrically controlled seats in very rare cases and under certain impact conditions the front seatbelt may provide a diminished level of restraint.

Fix: As a preventative measure subject vehicles will have the front seatbelt buckles replaced.

101 vehicles · built 5 Sep 2006 to 31 Mar 2007

If the battery voltage is abnormally low the antilock braking system electronic control unit may not perform to specification which in rare cases may cause a reduction in braking efficiency.

Fix: Recall the vehicles that are likely to be affected to replace the Electronic Control Unit.

4,032 vehicles · built 21 Jun 2006 to 31 Aug 2006

If the battery voltage is abnormally low the antilock braking system electronic control unit may not perform to specification which in rare cases may cause a reduction in braking efficiency.

Fix: Recall the vehicles that are likely to be affected to replace the Electronic Control Unit.

4,032 vehicles · built 15 Jun 2006 to 30 Aug 2006

It has been identified that on certain vehicles a fault may be present on the diesel fuel circuit return pipe ay the location of the pressure sensor.In the manufacture of the pipe an excess of material resulted in a reduction of the pipe's internal diameter therefore restricting the fuel flow and a risk of a diesel leak from the fuel connector.

Fix: Subject vehicles will have the diesel fuel delivery pressure in the injection pump checked. This will check the conformity of the pipe which in the case of nonconformity will be replaced.

126 vehicles · built 23 May 2006 to 19 Jul 2006

It has been identified that on a small number of vehicles the engine may have been fitted with a cylinder head where the lubrication circuit is not in conformity. This could result in failure of the engine.

Fix: Recalled vehicles will have the marking on the camshaft carrier checked and if found to be within the effected range the engine will be replaced.

127 vehicles · built 27 Feb 2004 to 3 May 2004

Braking assistance could be adversely affected by freezing of moisture that may accumulate in the vacuum circuit.

Fix: Recall the vehicles that may be affected and fit a separate air vent complete with filter to each electro valve fitted to the vacuum circuit.

5,062 vehicles · built 8 Jul 2003 to 29 Nov 2004

The seat belt locking action may not be as fast as it is designed to be.

Fix: Recall the vehicles that may be affecte check the date of manufacture of the seat belts and where necessary replace the seat belts.

39 vehicles · built 4 Jan 2006 to 5 Jan 2006

The seat belt locking action may not be as fast as it is designed to be.

Fix: Recall the vehicles that may be affecte check the date of manufacture of the seat belts and where necessary replace the seat belts.

39 vehicles · built 4 Jan 2006 to 6 Jan 2006

It has been identified that the front air bag ECU may not take full account of frontal impacts that are below the legal threshold for triggering deployment.

Fix: Recalled vehicles will have the air bag ECU re-programmed.

25,083 vehicles · built 19 Nov 2004 to 12 Jan 2006

Braking assistance could be adversely by freezing of moisture that may accumulate in the vacuum circuit.

Fix: Recall the vehicles that may be affected and fit a separate air vent complete with filter to each electro valve fitted to the vacuum circuit.

18,387 vehicles · built 26 Mar 2002 to 27 Jul 2005

It has been identified that the accelerator pedal can return too slowly. This can have an effect on the driving of the vehicle

Fix: Recalled vehicles will have the accelerator pedal replaced.

9,868 vehicles · built 18 Oct 2005 to 17 Dec 2005

It has been identified that the accelerator pedal can return too slowly. This can have an effect on the driving of the vehicle

Fix: Recalled vehicles will have the accelerator pedal replaced.

9,868 vehicles · built 6 Sep 2005 to 23 Dec 2005

It has been identified that the accelerator pedal can return too slowly. This can have an effect on the driving of the vehicle

Fix: Recalled vehicles will have the accelerator pedal replaced.

9,868 vehicles · built 31 May 2005 to 6 Jan 2006

There is a possibility that a seepage of brake fluid may occur at the union between the rear flexi hose and the metal brake pipes. This would eventually lead to the illumination of the low fluid warning lamp which if left would result in longer brake pedal travel and reduced effectiveness of the brakes.

Fix: Recall the vehicles that likely to be affected and check for seepage of brake fluid. If the brake fluid seepage is apparent the flexible brake hose and the associated metal brake pipes will be replaced.

6,906 vehicles · built 1 Jun 2005 to 30 Sep 2005

It has been identified that a potential fault in the engine management system could cause an internal fuel leak via one or more of the fuel injectors after switching off. This would result in a failure to restart because of excess fuel present in the inlet manifold or cylinders.

Fix: Recalled vehicles will have the engine management unit software upgraded.

257 vehicles · built 27 Jul 2004 to 25 Feb 2005

On subject vehicles the indication of 2.5 bar pressure for the spare wheel which can be found on a label affixed to the left hand door pillar is incorrect for the vehicle specification.

Fix: Recalled vehicles will have a replacement label affixed to the vehicle which will indicate the correct spare tyre pressure i.e. 4.2 bar. It should be noted that at manufacturethe tyre was inflated to the correct pressure however as a precaution the pressure of the spare wheel will be checked.

6,324 vehicles · built 1 Jul 2002 to 30 Apr 2003

A potential fault within the engine management system could cause an internal engine fuel leak via one or more of the injectors following engine switch off. The engine would then not restart because of the excess fuel present in the inlet manifold or cylinders.

Fix: Recalled vehicles will have the engine management unit software updated.

502 vehicles · built 25 Apr 2002 to 10 Apr 2003

This concern relates to right hand drive vehicles only. There may cases of the brake linkage lever being defectively assembled which may result in a loss of braking efficiency.

Fix: Recall the vehicles that are likely to be affected check and where necessary reposition the brake pedal relay linkage lever.

6,772 vehicles · built 9 Sep 2005 to 26 Nov 2005

This concern relates to right hand drive vehicles only. There may cases of the brake linkage lever being defectively assembled which may result in a loss of braking efficiency.

Fix: Recall the vehicles that are likely to be affected check and where necessary reposition the brake pedal relay linkage lever.

6,772 vehicles · built 1 Sep 2005 to 22 Nov 2005

This concern relates to right hand drive vehicles only. There may cases of the brake linkage lever being defectively assembled which may result in a loss of braking efficiency.

Fix: Recall the vehicles that are likely to be affected check and where necessary reposition the brake pedal relay linkage lever.

6,772 vehicles · built 1 Sep 2005 to 22 Nov 2005

This concern relates to right hand drive vehicles only. There may cases of the brake linkage lever being defectively assembled which may result in a loss of braking efficiency.

Fix: Recall the vehicles that are likely to be affected check and where necessary reposition the brake pedal relay linkage lever.

6,772 vehicles · built 8 Sep 2005 to 26 Nov 2005

Repeated ingress of saline water into the connections to the Electronic Control Unit for the Anti- Lock Braking system may eventually result in a short circuit that could cause a fire in the engine compartment.

Fix: Recall the vehicles that are likely to be affected to check the ABS block and strengthen the sealing of the electrical connections.

12,220 vehicles · built 1 Jan 2004 to 31 Dec 2005

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

4,962 vehicles · built 1 Apr 2003 to 30 Nov 2003

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

56,604 vehicles · built 1 Nov 2001 to 30 Nov 2003

There is a possibility of a brake pipe contacting the clip of the turbo-charger air inlet union. In extreme cases this could lead to a loss of brake fluid causing the brake warning lamp to come on.

Fix: Recall the vehicles that are likely to be affected and where necessary reposition the clip of the turbo-charger air inlet union. If the brake pipe shows traces of wear it will need to be replaced.

2,305 vehicles · built 1 Jul 2003 to 31 Mar 2004

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

163,446 vehicles · built 1 Apr 2000 to 30 Sep 2003

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

163,446 vehicles · built 1 Dec 2002 to 30 Sep 2003

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

50,357 vehicles · built 1 Dec 2002 to 30 Sep 2003

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

163,446 vehicles · built 1 Dec 2002 to 30 Sep 2003

In the exceptional event of a spring breaking there could be a risk of the spring making contact with the vehicle tyre.

Fix: Recall the vehicles that are likely to be affected and fit a suspension cup to each side of the front suspension.

50,357 vehicles · built 1 Jun 1999 to 30 Sep 2002

Due to draining of the condensation from the air conditioning system into the passenger compartment the air bag warning light may activate unintentionally. This in extreme cases may cause the air bag system to malfunction.

Fix: Recalled vehicles will have the sealing of the pipe which drains the condensation from the air conditioning system improved.

5,628 vehicles · built 1 Apr 2002 to 31 Jul 2004

The fixings for the under engine protection tray could deteriorate which could lead in some cases to the tray falling whilst the vehicle is in motion.

Fix: Recalled vehicles will have the engine under protection tray fixings replaced.

5,218 vehicles · built 1 Apr 2002 to 30 Sep 2004

The air bag control unit may be underestimating the significance of an impact for the purposes of deploying the airbags.

Fix: Recalled vehicles will have the airbag control unit replaced.

13,624 vehicles · built 1 Jul 2004 to 30 Sep 2004

The diesel fuel return pipe of the injection system for 1.6 HDI ( DV6) engines carries the risk that over time seeping of fuel may occur due to nonconformity in manufacture.

Fix: Recalled vehicles will have the return pipe replaced with a quality assured item.

1,286 vehicles · built 1 Jul 2004 to 30 Oct 2004

The diesel fuel return pipe of the injection system for 1.6 HDI ( DV6) engines carries the risk that over time seeping of fuel may occur due to nonconformity in manufacture.

Fix: Recalled vehicles will have the return pipe replaced with a quality assured item.

1,286 vehicles · built 1 Jul 2004 to 30 Oct 2004

The diesel fuel return pipe of the injection system for 1.6 HDI ( DV6) engines carries the risk that over time seeping of fuel may occur due to nonconformity in manufacture.

Fix: Recalled vehicles will have the return pipe replaced with a quality assured item.

1,286 vehicles · built 1 Jul 2004 to 30 Oct 2004

The C3 vehicles concerned are fitted with a panoramic sunroof in respect of which the mobile glass has securing nuts that do not meet the manufacturer's quality requirements.

Fix: Recall affected vehicles and replace the sunroof securing nuts.

64 vehicles · built 1 Oct 2004 to 1 Oct 2004

The dashboard harness on some vehicles may chafe which could cause random malfunctioning of the electric windows and in extreme cases could lead to a short circuit.

Fix: Recall the vehicles that are likely be affected and fit a plastic clip to the window switch wiring harness.

4,806 vehicles · built 1 Oct 2003 to 1 Nov 2003

The brake hoses may chafe on the wheel aches and in extreme cases cause a brake fluid leak. The driver will be informed of the defect by the illumination of a warning lamp on the dashboard. If ignored then this will result in longer than expected stopping distances.

Fix: Recall the vehicles that are likely to be affected and visually inspect the front brake hoses reinforcement and protection. The brake hoses if worn will be replaced.

9,945 vehicles · built 3 Sep 2002 to 12 Sep 2003

The original ECU software could generate an excessive vibration of the injection butterfly. In very rare cases the butterfly upper stop may fail causing the engine to go to back up mode which may result in a drop of brake assistance efficiency

Fix: Recall affected vehicles and download new engine ECU software and initialisation of the ECU.

3,562 vehicles · built 1 Feb 2003 to 31 Mar 2004

Contact at full suspension travel may occur between the left hand rear splash shield and the brake hose. This may result in wearing of the hose after a period of time.

Fix: Likely to be affected vehicles will have the splash shield modified and the brake hose re-routed.

3,193 vehicles · built 1 Apr 2003 to 1 Feb 2004

The accelerator pedal can become jammed in the fully open position.

Fix: Replace the accelerator pedal stop with a modified version.

10,473 vehicles · built 1 Mar 2002 to 1 Feb 2004

Possibility that roof bars may slip when bulky objects are placed on them

Fix: Recall affected vehicles and replace roof bars with modified type.

381 vehicles · built 1 Oct 2001 to 1 Jan 2004

There is a possibility of defective components in the heater blower which could cause a short circuit and a loss of ventilation of the passenger compartment and in an extreme condition could set fire to the wiring harness.

Fix: Recall affected vehicles and replace heater blower module.

25 vehicles · built 1 Apr 2002 to 31 Oct 2002

The handbrake adjustment system may be unreliable which will reduce its efficiency under certain conditions.

Fix: Check adjust and/or replace the brake shoe mechanisms.

4,448 vehicles · built 1 Mar 2002 to 30 Sep 2003

There is a possibility of disengagement of the accelerator pedal from the support linkage which could result in loss of acceleration

Fix: Recall affected vehicles and replace accelerator pedal clips

5,872 vehicles · built 1 Mar 2003 to 30 Jun 2003

Under severe operating conditions and high mileage the pressed aluminium road wheels may crack around the wheel fixing holes. This could ultimately result in the detachment of a wheel.

Fix: Replace the wheels with a modified type.

14,110 vehicles · built 1 Jan 2001 to 31 May 2003

The wiring connections to the left and right side lateral airbags may have been transposed. This could result in deployment of the incorrect airbag in a collision.

Fix: Check the wiring connections and correct them where found necessary.

8,321 vehicles · built 1 Sep 2002 to 31 Jan 2003

Inadequate protection of the heater blower wiring harness may result in chafing damage leading to a short circuit and risk of fire.

Fix: Check for correct routing of the blower wiring harness and fit a protective sleeve.

3,083 vehicles · built 31 May 2002 to 30 Jan 2002

An inadequate weld on the bottom engine mounting tie bar may fail and cause a serious engine vibration and separation of one of the driveshafts.

Fix: Fit a replacement bottom engine mounting tie bar.

266 vehicles · built 24 Mar 2003 to 4 Apr 2003

Water ingress into the airbag electronic control unit (ECU) could result in illumination of the warning light and in the worst case unintentional deployment of the airbag.

Fix: Seal the airbag ECU compartment.

118 vehicles · built 25 Apr 2002 to 12 Dec 2002

When the vehicle is moving an electrical signal could neutralise the sliding door safety lock and allow the door to open unintentionally.

Fix: Fit a replacement electronic control unit to the door.

269 vehicles · built 25 Apr 2002 to 12 Dec 2002

Vacuum Servo Pipe may become detached resulting in loss of servo assistance

Fix: Replace vacuum pipe

202 vehicles

Transposed wiring connections to the side air bags control unit will result in deployment of the air bag on the opposite side of an impact.

Fix: Correct the wiring connections.

8,297 vehicles · built 1 Sep 2002 to 31 Jan 2003

Vehicles with the HDI engines but without the optional diesel fired heater may be fitted with the maxi-fuse supplying the fuel heater circuit. This can in certain cases lead to a short circuit and a consequential fire risk.

Fix: Remove the maxi-fuse.

5,488 vehicles · built 1 Sep 2002 to 31 Jan 2003

Water ingress to the ABS ECU connector may cause a malfunction of the anti lock braking system. In the worst case water contamination could cause a short circuit and fire in the ABS control unit.

Fix: Protect the ABS connector from water ingress. Replace the ABS ECU if found necessary.

5,032 vehicles · built 1 Sep 2002 to 30 Nov 2002

The front passenger air bag may not fully deploy in an impact.

Fix: Fit a replacement air bag.

361 vehicles · built 1 Jul 2002 to 31 Jul 2002

The rear suspension cross member may have been cut in production. This could eventually result in failure of the cross member and cause loss of control of the vehicle.

Fix: Replace any rear suspension cross member found to be cut.

42 vehicles · built 1 Sep 2002 to 30 Sep 2002

The front suspension lower ball joint pinch bolts may not have been fully tightened. In the worst case separation of the ball joint from the suspension arm would affect directional control of the vehicle.

Fix: Check the ball joint pinch bolts for correct torque and tighten where necessary.

2,828 vehicles · built 1 Jan 2002 to 31 Aug 2002

The anti lock brake control unit may overheat and cause the footbrake to revert to none anti lock mode.

Fix: Check the ABS control unit identification number and replace the control unit where found necessary.

878 vehicles · built 1 Jan 2001 to 4 Jul 2002

There is a possibility that the handbrake will not hold the vehicle stationary if it is not fully applied.

Fix: Fit a modified handbrake lever designed to ensure that an effective brake application is always made

16,061 vehicles

There is a possibility that the parking brake cable may not be to the correct specification and could break at the rear section resulting in loss of parking brake.

Fix: Recall affected vehicles and replace parking brake cable.

171 vehicles · built 1 Nov 2001 to 31 Dec 2001

A locking clip may not have been fitted correctly to one or more of the five clevis pins connecting the footbrake relay linkage inside the cabin. Disconnection of the linkage will result in the loss of service braking.

Fix: Recall affected vehicles to check that all five locking clips are secure.

77,595 vehicles

Water ingress into the underbonnet vacuum electrovalves may cause a reduction in power assistance at the brake pedal. Malfunction of the electrovalves could also adversely affect the engine exhaust emissions.

Fix: Replace the three electrovalves as a precaution and install a protective shield over them.

80 vehicles · built 1 Sep 2000 to 31 May 2001

Water ingress into the underbonnet vacuum electrovalves may cause a reduction in power assistance at the brake pedal. Malfunction of the electrovalves could also adversely affect the engine exhaust emissions.

Fix: Replace the three electrovalves as a precaution and install a protective shield over them.

80 vehicles · built 1 Sep 2000 to 31 May 2001

A defect in the ABS (Antilock Brake) ring on the front wheel bearings may cause a malfunction of the Antilock Brake System.

Fix: Recall affected vehicles and fit new front wheel bearings.

2,373 vehicles · built 1 Jan 2000 to 28 Feb 2000

The camshaft drive belt may fail before the recommended replacement interval of 72000 miles. This could result in a complete loss of engine power without warning.

Fix: Recall affected vehicles and fit a quality assured replacement camshaft drive belt.

4,134 vehicles · built 1 Jan 1995 to 31 Dec 1996

A potential defect in the rear brake caliper may cause the parking brake efficiency to be reduced.

Fix: Recall affected vehicles to check the operation of each brake caliper and replacement of the caliper if necessary.

484 vehicles · built 1 Jan 2001 to 28 Feb 2001

Fuel tank rear mountings may not adequately secure the tank with a risk of possible disengagement.

Fix: Recall affected vehicles and fit additional bolts or reinforcement plates to rear tank mountings depending on original build configuration.

2,313 vehicles · built 1 Jul 1999 to 31 Mar 2000

Possibility of failure of the vacuum pump drive dog leading to a loss of brake assistance.

Fix: Recall the potentially affected range of vehicles and replace the drive dog on those equipped with a Magneti Marelli Vacuum pump

2,812 vehicles · built 1 Jan 1999 to 31 Dec 2000

Possibility of failure of the vacuum pump drive dog leading to a loss of brake assistance.

Fix: Recall the potentially affected range of vehicles and replace the drive dog on those equipped with a Magneti Marelli vacuum pump.

2,611 vehicles · built 1 Jan 1999 to 31 Dec 2000

There is a possibility that due to incorrect machining of the suspension ball joint clamp bolt hole on the pivot the ball joint may disengage.

Fix: Recall affected vehicles and check and replace pivot if necessary.

3,648 vehicles · built 1 Jul 2000 to 31 Aug 2000

There is a possibility that due to incorrect machining of the suspension ball joint clamp bolt hole on the pivot the ball joint may disengage.

Fix: Recall affected vehicles and check and replace pivot if necessary.

3,648 vehicles · built 1 Jul 2000 to 31 Aug 2000

Due to a possible fault within the control switch the passenger air bag may not be deactivated when the switch is in the off position.

Fix: Likely to be affected vehicles will be recalled and the function of the deactivation control switch checked. Should a defective switch be found it will be replaced with a quality assured unit.

569 vehicles · built 1 Nov 1999 to 30 Nov 1999

There is a possibility that the brake servo valve may not function correctly resulting in loss of servo assistance to the braking system.

Fix: Recall affected vehicles for the inspection and possible replacement of the brake servo valve.

9,088 vehicles · built 1 Sep 1999 to 31 Oct 1999

There is a possibility that the brake servo valve may not function correctly resulting in loss of servo assistance to the braking system.

Fix: Recall affected vehicles for the inspection and possible replacement of the brake servo valve.

1,070 vehicles · built 1 Sep 1999 to 31 Oct 1999

There is a possibility that the brake servo valve may not function correctly resulting in loss of servo assistance to the braking system.

Fix: Recall affected vehicles for the inspection and possible replacement of the brake servo valve.

9,088 vehicles · built 1 Sep 1999 to 31 Oct 1999

There is a possibility that the brake servo valve may not function correctly resulting in loss of servo assistance to the braking system.

Fix: Recall affected vehicles for the inspection and possible replacement of the brake servo valve.

9,088 vehicles · built 1 Sep 1999 to 31 Oct 1999

Potential interference between handbrake cables and rear brake pipes could lead to wear of brake pipes and in extreme circumstances loss of brake fluid which could reduce the effectiveness of the footbrake.

Fix: Recall potentially affected vehicles for a check that adequate clearance exists and realignment of the pipes if needed.

1,708 vehicles · built 1 Nov 1997 to 30 Jul 1998

Potential interference between handbrake cables and rear brake pipes could lead to wear of brake pipes and in extreme circumstances loss of brake fluid which could reduce the effectiveness of the footbrake.

Fix: Recall potentially affected vehicles for a check that adequate clearance exists and realignment of the pipes if needed.

1,708 vehicles · built 1 Nov 1997 to 30 Jul 1998

Premature wear of the handbrake ratchet pawl may lead to inadvertent release of the handbrake. Problem of material hardness discovered in Quality Control tests.

Fix: All vehicles from the period of production that may have a defective lever to be recalled and a new lever fitted.

689 vehicles · built 1 Mar 1998 to 30 Jul 1998

There is a risk of disengagement of the drivers seat catch allowing the seat to move on its runners.

Fix: The recall operation will check the security of the seat runner which will be replaced if necessary. In some cases replacement of the seat frame will be required.

7,309 vehicles

1) The seat belt may jam following normal operation of the seat belt pretensioners in an accident. 2) The drivers airbag may deploy involuntarily.

Fix: Recall the affected vehicles and:- 1) Replace the original seat belt buckle and its associated pretensioner control by new Autoliv components. 2) Upgrade the drivers airbag to the latest specification.

25,367 vehicles · built 1 Nov 1994 to 31 Mar 1995

Under conditions of heavy braking the footbrake relay cross shaft ball joint may detach from its left hand mounting. This would result in failure of the service brake.

Fix: Recall the affected vehicles and check that the ball joint is properly located in its bush. Where this is not the case the mounting assemblies will be adjusted or replaced as necessary.

5,250 vehicles · built 1 Jan 1994 to 31 May 1995

Under conditions of heavy braking the footbrake relay cross shaft ball joint may detach from its left hand mounting. This would result in failure of the service brake.

Fix: Recall the affected vehicles and check that the ball joint is properly located in its bush. Where this is not the case the mounting assemblies will be adjusted or replaced as necessary.

5,250 vehicles · built 1 Jan 1994 to 31 May 1995

There may be inadequate clearance between one or both brake pipes at the master cylinder and a coolant pipe bracket on the cylinder head. Intermittent contact can consequently occur due to engine movement under high load. Should any of the brake

Fix: Recall the affected vehicles and inspect and re-route the subject brake pipes. Any brake pipes found to be damaged will be replaced.

515 vehicles · built 1 Jan 1992 to 31 Dec 1994

Instances have occurred of Xantia vehicles moving away following an incomplete application of the parking brake by the driver.

Fix: Recall the vehicles to fit a modified parking brake lever which will prevent the driver from making only a partial application of the parking brake.

52,050 vehicles · built 1 May 1993 to 17 Oct 1994

It is possible that the front brake pipe may be contacted by the anti-roll bar link rod. In extreme conditions this may result in fluid leakage and partial loss of braking.

Fix: The affected vehicles will be recalled and inspected for contact between the brake pipes and the anti-roll bar link. If no contact has taken place the pipe(s) will be re-set to ensure adequate clearance . Any pipes showing signs of contact will be replaced

16,419 vehicles

Due to the possibility of incomplete application of the parking brake by the driver the vehicle could roll away when parked.

Fix: The manufacturer will write to all Xantia owners enclosing an amendment for insertion in the vehicle handbook. This will amplify and reinforce the instructions relating to the operation of the parking brake.

26,500 vehicles · built 1 May 1993 to 31 Mar 1994

Due to the effects of age and temperature the underbonnet rubber fuel lines may harden. This could lead to the possibility of fuel leakage particularly when the engine is cold.

Fix: Recall the affected vehicles for replacement of the existing fuel pipes with the modified versions introduced to production vehicles in 1992.

1,399 vehicles · built 1 Jan 1989 to 30 Jun 1992

There is a possibility that the clutch lever may foul a moulded clip which secures the engine wiring harness. Should this occur the clip may open releasing the harness and making it liable to chafing and damage by the clutch lever.

Fix: Recall the affected vehicles and substitute a nylon fixing strap for the original moulded harness clip. This will ensure adequate operating clearance for the clutch lever.

1,632 vehicles