Honda CBF600 recalls

Certain roads conditions can produce inputs which can dislodge the top box from the mountings which could result in the top box falling from the machine.

Fix: Recall the vehicles that are likely to be affected to replace the top box base unit and carrier with modified parts.

595 vehicles

The rear master cylinder mounting bolts may become loose. In the unlikely event that both mounting bolts become detached the operation and function of the rear brake may be adversely affected.

Fix: Recall the machines that are likely to be affected to inspect and where necessary carry out appropriate repairs.

• CBF600: 702 vehicles · built 26 May 2008 to 4 Jul 2008
• CBF600: 702 vehicles · built 26 Jan 2009 to 17 Feb 2009

The speed sensor coupler may become corroded due to water infiltration which can cause the transmission of incorrect electrical signals to the speedometer resulting in incorrect speed indication.

Fix: Recall affected machines check coupler for water infiltration and condition of terminal connectors. Depending on the result of this inspection the relevant countermeasure will be applied.

1,619 vehicles · built 10 Oct 2007 to 31 Jul 2008

It has been identified that the possibility exists that the fuel control valve diaphragm within the fuel valve assembly may not have been manufactured to specification. Due to poor adhesion of the rubber to nylon backing material fuel can seep through the nylon fibres to the vented side of the diaphragm. In the worst case fuel can drip slowly from the valve when the machine is stationary with the engine idling.

Fix: Recalled machines will be fitted with a countermeasure fuel valve set.

• CBF600: 532 vehicles · built 13 Dec 2006 to 20 Jul 2007
• CBF600: 532 vehicles · built 30 Nov 2006 to 6 Aug 2007
• CBF600: 532 vehicles · built 13 Dec 2006 to 23 Jul 2007
• CBF600: 532 vehicles · built 13 Dec 2006 to 6 Aug 2007